• International Journal of Control, Automation, and Systems
• /
• 제6권3호
• /
• pp.386-393
• /
• 2008

A position control method for interpolating aspherical grinding and polishing tool path was reviewed and experimented in a nano precision machine. The position-base algorithm was reformed from the time-base algorithm, proposed in the previous study. The characteristics of the algorithm were in the velocity control loop with position feedback. The aspherical surface was divided by an interval at which each velocity and acceleration were calculated. The theoretical velocity was corrected by position error during processing. In the experiment, a machine was constructed and nano-scale linear encoders were installed at each axis. Relation between process parameters and the variation of position error was monitored and discussed. The best result from optimized parameters showed that the accuracy was 150nm and improved from the previous report.

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2172-2178
• /
• 1997

Development of diamond wheel with fine grains and multi-pore structures were newely attempted. Wheels, that are employed for ultra precision and high performance grinding of difficult-to materials such as tungsten carbide alloy using tool and die materials, must have both performances to remove tool marks efficiently and to contact elastically with curved surfaces. Diamond grains were bonded firmly by a melamine resin to prevent the decrease of machining efficiency due to grain sinking within the bond materials. Also, highly foamed structures were developed to increase the flexibility of the wheel, and to induce active self-sharpening by increasing contact pressure between the wheel and work surfaces. In this paper, melamine-bonded diamond wheels are trial manufactured, then the forming method of wheels are suggested, and the grinding characteristics of wheels are also illustrated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1787-1792
• /
• 2003

Recently with the development of semiconductor technology, the miniaturization of parts and products as well as their high precision is required. In addition, as the national competitiveness is increasingly affected by the development of the micro parts through micro machining technology, the study of the micro machining technology is being conducted in many countries. The goal of this study is to fabricate micro tools under the size of $20{\mu}m$ and to machine micro holes using them. The fabrication is done by grinding and the application of ELID to the grinding wheel. The surface roughness of the micro tools is measured to evaluate the study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.176-181
• /
• 1994

As tools for machining precesion componants, end mills and ball end mill are widely used. For the end mill have longer cylindrical shape comparing diameter, they are liable to deflect when machining and induce geometrical error and deterioration of surface roughness. To improve the stiffness and the sharpness of the cutting edge of end mill, a software for manufaturing end mills are developed. The progeam predicts the result of helical flute grinding and the configuration of cutting edge which is located in cylindrical surface. Furthermore to facilitate the manufacturing end mill using CNC grinding machine, the setting conditions which satisfy the geometrical requirments like tool rake angle and stiffness are obtained.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.422-427
• /
• 2003

Sapphire have been ground by the ultra-precision surface grinder having a glass -ceramic spindle of extremely-low thermal expansion with various cup-type resinoid-bonded diamond wheels of #400-#3000 in grain size. Sapphire can be ground in the ductile mode. And also, the surface roughness and grinding conditions has been clarified. The smooth surface of Sapphire less than 1nm RMS, 1nm Ra can be obtained by the ultra-precision grinding without any polishing Process.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.60-67
• /
• 2012

In the study, the effect grinding condition on the workpiece arithmetical average roughness(Ra) to 10 steps leading to cutting each section with the spindle rotational speed 8000rpm and feed rate 150mm/min of grinding in GC(green silicon carbide) grinding processing after heat treatment and non heat treatment of SCM415 material. Also the following conclusions were obtained analysis of stress distribution displacement and finite elements method(FEM) on assemble parts with 3+2 axis simultaneous control through grinding and gave a load 11kg on ATC arm both sides gave a load of 11kg. For the centerline average roughness(Ra) in the heat and non-heat treatment work pieces, which were appeared the most favorable in the fifth section were $0.511{\mu}m$ and $0.514{\mu}m$, that were shown in the near the straight line section was the smallest deformation of curve. In addition, the bad surface roughness appeared on the path is too long by changing angle, the more inclined depth of cut, because the chip discharging is not smoothly.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.223-238
• /
• 2002

This paper presented on an environment estimation of cutting fluid which is a mouse model of acute bacterial rhinosinusitis using cutting fluid in grinding and cutting. Above results will be remarked the necessity of friendly environmental cutting skill when it had used in workshop. The results of a mouse experimental using cutting fluid showed that it are occurred to the respiratory organs sickness. Also cutting fluid are occurred to hurtfulness a person when it used to grinding and cutting in workshop. Also, the results of grinding experiments in avitation materials showed that surface roughness are superior to more emulsion type oil than vegetable type oil according to increase of the depth of cut. Grinding force are similar to both emulsion type oil and vegetable type oil.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.25-30
• /
• 1997

In recent years, grinding techniques for precision machining of astainless steel used in shaft, screw parts and clear value have been improved by using superabrasive wheel and precision grinding machine. The completion of optimum dressing of superabrasive wheel makes possible the effective percision grinding of stainless steel. However, the present dressing system cannot have control of optimum dressing of the superabrabive wheel. In this study, a new system and the grinding mechanism of optimum in-process electrolytic dressing were proposed. This system can carry out optimum in-process dressing of superabrasive wheel. Therefore, the optimum in-process electrolytic dressing is a good method to obtain the efficiency and mirror-like grinding of stainless steel(SUS304).

• 한국공작기계학회논문집
• /
• 제16권2호
• /
• pp.63-69
• /
• 2007

The surface roughness in centerless grinding is mainly affected by the many process parameters. For improving the surface roughness, the control of grinding parameters is very important. This paper deals with the analysis of the process parameters such as height of renters, tilting angle of the regulating wheel with respect to grinding wheel, rotation speed of regulating wheel, which are developed based on design of experiments such as factorial design. The investigation can enhance the surface roughness of ferrule. Finally, we have verified improved results of the optimized conditions.

• 한국공작기계학회논문집
• /
• 제16권2호
• /
• pp.30-36
• /
• 2007

In order to estimate the maximum undeformed chip thickness in grinding operation, it is necessary to obtain the successive cutting point spacing. In the past it was obtained by experiments. In this paper, the average successive cutting point spacing has been obtained using the given grinding input conditions and it is possible to estimate the maximum undeformed chip thickness without using any experimentally obtained data. The validity of the proposed analysis has been verified based on two sets of grinding scratch tests using WA and CBN grinding wheels.