Transactions of the Korean Society of Machine Tool Engineers (한국공작기계학회논문집)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Estimation of the Maximum Undeformed Chip Thickness Using the Average Grain Model

평균입자 연삭모델에 의한 최대미변형칩두께의 예측

  • 이영문 (경북대학교 기계공학부) ;
  • 최원식 (부산대 바이오시스템공학부) ;
  • 손재환 (대구기계부품연구원) ;
  • 배대원 (경북대 대학원 기계공학과) ;
  • 손성필 (경북대 대학원 기계공학과) ;
  • 황근식 (경북대 대학원 기계공학과)
  • Published : 2007.04.15
Download PDF
⟨ Previous Next ⟩

Abstract

In order to estimate the maximum undeformed chip thickness in grinding operation, it is necessary to obtain the successive cutting point spacing. In the past it was obtained by experiments. In this paper, the average successive cutting point spacing has been obtained using the given grinding input conditions and it is possible to estimate the maximum undeformed chip thickness without using any experimentally obtained data. The validity of the proposed analysis has been verified based on two sets of grinding scratch tests using WA and CBN grinding wheels.

Keywords

References

  1. Malkin, S., 1989, Grinding Technology - Theory and Application of Machining with Abrasives, John Wiley & Sons, pp. 45
  2. Snoeys, R., 1974, 'The Significance of Chip Thickness in Grinding', Annals of CIRP, Vol. 23/2, pp. 227-237,
  3. Lee, Y. M., Choi, W. S., Chang, S. I., Bae, D. W., Son, J. H. and Lee, H. G., 2005, 'Analysis of specific grinding energy using average grain model,' Trans. KSMTE, Vol. 14, pp. 61-68
  4. Malkin, S., 1989, Grinding Technology - Theory and Application of Machining with Abrasives, John Wiley & Sons, pp. 46-59
  5. Malkin, S., 1989, Grinding Technology - Theory and Application of Machining with Abrasives, John Wiley & Sons, pp. 22-24
  6. Krar, S. F. and Ratterman, E., 1990, Superabrasives: Grinding and Machining With CBN and Diamond, Gregg Division McGraw-Hill
  7. Checking the Size of diamond Abrasive Grain, American National Standard ANSI B74.16-1982
  8. Malkin, S., 1989, Grinding Technology - Theory and Application of Machining with Abrasives, John Wiley & Sons, pp. 95-96