• 해양환경안전학회지
• /
• 제19권3호
• /
• pp.290-301
• /
• 2013

The docking analysis of a global ship structure is requested to evaluate its structural safety against the reaction forces at supports during docking works inside a dry dock. That problem becomes more important recently as the size of ships is getting larger and larger. The docking supports are appropriately arranged in a dock to avoid their excessive reaction forces which primarily cause the structural damages in docking a ship and, up to now, the structural safety has been assessed against the support arrangement by the finite element analysis (FEA) of a global ship structure. However, it is complicated to establish the finite element model of the ship in the current structural design environment of a shipyard and it takes over a month to finish the work. This paper investigates a simple and fast approach to carry out a ship docking analysis by a simplified grillage model and to assign the docking supports position on the model. The grillage analysis was considered from the motivation that only the reaction forces at supports are sufficient to assess their arrangement. Since the simplified grillage model of the ship cannot guarantee its accuracy quantitatively, modeling strategies are proposed to improve the accuracy. In this paper, comparisons between the proposed approach and three-dimensional FEA for typical types of ships show that the results from the present grillage model have reasonably good agreement with the FEA model. Finally, an integrated program developed for docking supports planning and its evaluation by the proposed approach is briefly described.

• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.710-718
• /
• 2008

This paper presents a simple and fast approach to plan the arrangement of supports and to do a ship docking analysis. The unpredicted structural damages often happen from a docking works as the size of ships are getting larger and larger. In docking a ship, excessive reaction forces from supports are primary causes of the structural damage. The grillage analysis method is employed to simply calculate only the reaction forces at supports. The grillage modeling strategies are proposed to improve the accuracy. In this paper, the results obtained by the proposed approach are compared with those of the current whole-ship FEA for typical types of ships. Comparison shows that the results from the present grillage approaches are reasonably in a good agreement with the 3-D full F.E one. Finally, an integrated program developed for the ship docking analysis is described.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.7-14
• /
• 2001

For the development of the practical methods of structrual analysis of typical VLFS. Orthortropic plate theory and a grillage beam theory and modeling techniques are studied and relevant numerical analysis are carried out. For the design of pontoon type VLFS, an efficient and reliable structural analysis techniques must be established, and as corresponding methods, two approaches mentioned above were studied in view point of their applicability and efficience. For that purpose, structural idealization is performed to make overall structural analysis first, and the structural behaviors of the model in the airplane landing simulation are evaluated. Through this study it is found that the structural idealization using orthotropic plate and grillage modeling are porved to be adequate and the numerical analysis results for real VLFS yields acceptable deformations in the corresponding simulations.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.95-100
• /
• 2011

In general, thickness of bottom floor in fore/aft cargo hold region for container ship has been determined based on FEM analysis result of mid cargo hold region. But this approach has room for improvement because section shape and frame spacing in fore/aft cargo hold of container ship are quietly different from those of mid cargo hold. From this study, correlation between FEM result and grillage analysis result has been investigated and simple method for thickness determination of bottom floor in fore/aft cargo hold using newly improved grillage analysis is proposed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권1호
• /
• pp.159-170
• /
• 2005

격자구조는 병렬하는 주거더에 횡거더로 접합된 구조를 말하며 집중하중이 재하될 때 하중이 주거더만 부담하지 않고 횡거더를 통하여 다른 주거더로 하중이 일부를 부담하게 된다. 격자형의 교량은 과다한 집중하중을 분산시켜 내하력이 높은 특성을 갖고 있으며 사용재료를 절약할 수 있어 경제적이다. 본 연구에서는 해석절차가 간단하고 이해가 쉬운 전달행렬법을 이용하여 격자교의 프로그램을 작성하여 Leonhardt, Szabo, FEM, 양창현 및 정진환의 해석결과와 비교하였다. 또한, 경사각을 갖는 직선격자교와 곡선격자교의 특성을 분석하였고, 경사각과 휨강도/비틀림강도의 비에 따른 직선격자교와 곡선격자교의 단면력을 분석하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.325-332
• /
• 2001

Due to the rapidly developing computer technique, bridges can be modeled by using grillage method for analyzing the girder, or FEM for more accrute and detailed analysis. If the cells of multicellular decks are stiffened with diaphrams or cross-bracing at frequent intervals, to prevent them changing shape by distortion, the deck can be analysed like a beam if it is narrow, or like slab if it is wide. However it is often convenient and acceptable to use cellular structures and box-girders which do distort under shear and torsional loading, and it is then necessary to take account of the distortion in the method of calculation. But plane grillage method cannot cosider effect of distortion and FEM is non-economical because it is not easy to modeling and needs lots of time. So, this study suggests the Shear-flexible Grillage which reproduces the distortion behaviour of the cells.

• 대한조선학회논문집
• /
• 제59권1호
• /
• pp.39-45
• /
• 2022

Normal strategy of structure optimization procedure has been minimum cost or weight design. Minimum weight design satisfying an allowable stress has been used for the ship and offshore structure, but minimum cost design could be used for the case of high human cost. Natural frequency analysis and forced vibration one have been used for the strength estimation of marine structures. For the case of high precision experiment facilities in marine field, the structure has normally enough margin in allowable stress aspect and sometimes needs high natural frequency of structure to obtain very high precise experiment results. It is not easy to obtain a structure design with high natural frequency, since the natural frequency depend on the stiffness to mass ratio of the structure and increase of structural stiffness ordinary accompanies the increase of mass. It is further difficult at the grillage structure design using the profiles, because the properties of profiles are not continuous but discrete, and resource of profiles are limited at the design of grillage structure. In this paper, the grillage structure design system under the constraint of high natural frequency is introduced. The design system adopted genetic algorithm to realize optimization procedure and can be used at the design of the experimental facilities of marine field such as a towing carriage, PMM, test frame, measuring frame and rotating arm.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.91-101
• /
• 2004

For the grillage which is common types of structures in marine and land-based structural system, the elastic response and design methods are usually applied. However, plastic analysis and design methods are considered Tn those structures to maintain the structural stability at the limit states. In grillage design, the central intersection point load may be used as a worst loading condition. However, a point load may often move around on the grid system. in such case, the worst load point would not necessarily be at the central point. To investigate the variation of plastic collapse load according to the location of moving load between intersections, the plastic collapse loads are obtained for the three types of grillages with simply-supported ends. From the result of each case, it is confirmed that the worst load point is located between intersections. General formulae related with plastic collapse loads for the three groups of grillages with simply-supported boundaries are derived. Those plastic collapse formulae for the grillages are applied to the design of pontoon deck, and optimum design procedure is illustrated. Consequently, general formulae for the plastic collapse of grillages derived from this study can be easily applied to the plastic analysis and optimum design of similar grillages.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.382-387
• /
• 2003

This research has investigated structural characteristics of curved two girder bridges proposed for AGT system and analyzed the results of the structural analysis of three different modelings for 3 span continuous bridge, each modeled in grillage modeling, simplified 3D modeling, and detailed 3D modeling respectively. The grillage modeling appeared to be somewhat underestimated in deflection and overestimated in rotation with respect to 3D modelings. Also, it is impossible to make a detailed examination of local buckling and details of cross beams, etc. The point that warping effect cannot be considered may cause the structural analysis unsafe, accordingly the structural analysis of curved two girder bridges should be done with 3D modelings.

• 한국강구조학회 논문집
• /
• 제17권5호통권78호
• /
• pp.511-518
• /
• 2005

원곡선교의 거동은 일반적인 직선교보다 복잡하여 교량의 해석 및 설계와 시공에 있어서 많은 주의를 요한다. 곡선교의 설계에는 일반적인 구조해석 프로그램이나 전용 프로그램에 의한 격자 해석이 주로 이용되는데 이들 해석 프로그램의 결과와 실제 곡선 교량의 거동에 대한 정합성을 비교 검토한 연구는 국내에서 아직까지 이뤄지지 않았다. 본 연구에서는 두 개의 교량-단경간 교량과 3경간 연속교-을 대상으로 현장 계측 및 범용 구조해석 프로그램과 3차원 정밀 해석 프로그램을 이용한 해석을 실시하여 곡선교의 거동에 대한 연구와 현 설계 방법에 대한 검증을 실시하였다. 공정별 계측과 해석 결과는 서로 정량적인 차이를 보이고 있지만 정성적으로는 유사한 관계를 가지고 있었다. 플랜지의 횡 방향에 대한 응력의 변화가 관찰되었고, 격자 해석 모델이 3차원 정밀 해석 모델보다 보수 측의 해석 결과를 갖는 것으로 나타났다.