• Journal of Drive and Control
• /
• v.17 no.2
• /
• pp.9-18
• /
• 2020

The purpose of this study was to analyze the effect of the soil cone index (CI) on the tractor work load. A load measurement system was constructed for measuring the field data. The field sites were divided into grids (3×3 m), and the cone index was measured at the center of each grid. The work load measured through the plow tillage was matched with the soil cone index. The matched data were grouped at 600 kPa intervals based on the cone index. The work load according to the cone index was analyzed for engine, axle, and traction load, respectively. The results showed that when the cone index increased, engine torque decreased by up to 9%, and the engine rotational speed and brake-specific fuel consumption increased by up to 5% and 3%, respectively. As the cone index increased, the traction and tillage depth were inversely proportional to the cone index, decreasing 7% and 18%, respectively and the traction and tillage depth were directly proportional to the cone index, increasing 13% and 12%, respectively. Thus, it was found that the cone index had a major influence on the engine, axle, and traction loads of the tractor.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.3
• /
• pp.200-207
• /
• 2003

'||'||'||'&'||'||'||'quot;Overheating index'||'||'||'&'||'||'||'quot;, the normalized difference in incident solar energy between a target surface and a level surface, is helpful in estimating the spatial variation in daily maximum temperature at the landscape scale. It can be computed as the ratio of the 4-hour cumulative solar irradiance surplus or deficit from that over a level surface to the maximum possible deviation (15 MJ $m^{-2}$ ) during the midafternoon. Ecosystem models may, for simplicity, use an empirical proxy (exposure index) variable combining slope and aspect in place of the overheating index to account for the variation of midafternoon solar irradiance. A comparative study with real-world landscape data was carried out to evaluate the performance of exposure index in replacing the overheating index. Overheating indices for summer solstice, fall equinox and winter solstice were calculated at 573,650 grid cells constituting the land surface of Donggye-Myun, Sunchang County in Korea, based on a 10-m DEM. Exposure index was also calculated for the same area and fitted for the variation of overheating index to derive a 2$^{nd}$ -order linear regression equation. The coefficient of determination ($R^2$) was 0.50 on summer solstice, 0.56 on fall equinox, and 0.44 on winter solstice, respectively. These are much lower than the theoretically calculated $R^2$ values ranging from 0.7 in summer to 0.9 in autumn. According to our study, exposure index failed to accurately predict the cumulative solar irradiance over a complex terrain, hindering its application to daily maximum temperature estimation. We suggest direct calculation of the overheating index in preference to using the exposure index.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.1
• /
• pp.1-7
• /
• 2018

IEC 61000-3-7 provides guidance for limiting flicker and enabling the connection of fluctuating load installations, that is, producing flicker in MV, HV and EHV power systems. In Korea, the flicker have been restricted by Japanese standard of ${\Delta}V_{10}$ method. ${\Delta}V_{10}$ was developed only for arc furnaces in 1960's. And now it is revealed that it is not suitable for application to other fluctuating load installations through many researches. $P_{st}$ which is a flicker index used in IEC 61000-3-7, indicates visual inconvenience due to voltage fluctuation across large range of frequency and can be applied to fluctuating load installations as well as arc furnaces. In this paper, we introduce how to calculate and assess flicker emission level for the individual fluctuating load installations connected in EHV system and how to manage the emission levels in the power system according to IEC 61000-3-7.

• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.98-105
• /
• 2009

In this paper, new data centric storage that is dynamically adapted to the change of work load is proposed. The proposed data centric storage distributes the load of hot spot area by using multilevel grid technique. Also, the proposed method is able to use existing routing protocol such as GPSR (Greedy Perimeter Stateless Routing) with small changes. Through simulation the proposed method enhances the lifetime of sensor networks over one of the state-of-the-art data centric storages. We implement the proposed method based on a operating system for sensor networks, and evaluate the performance through running based on a simulation tool.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1889-1896
• /
• 2003

In the microfluidic applications, viscous-driven pumping mechanism is a promising one since the viscous effect increases significantly as the size of device decreases, relative to the inertial effect. However, there exist a few drawbacks we have to improve such as low efficiency and small volume flow rate. In the present study, an optimum design synthesis is proposed to enhance the performance characteristics of the micropump with single rotating cylinder. First, the unstructured grid CFD method is described and validated by comparing its results to the previous results. Next, an automated optimum design synthesis tool is constructed by combining the aforementioned CFD analysis model with the mathematical optimization model. This technique is used to improve the performance characteristics of newly designed viscous-driven pump. The presented results show that the fluid dynamic optimization tool is robust and may be applied to other microfluidic device design applications.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.1505-1508
• /
• 2005

본 논문에서는 그리드 컴퓨팅 환경에서 연산자원의 성능지수를 사용한 작업할당 기법에 관해 연구하였다. 제안한 연산자원의 성능지수를 사용한 작업할당 기법은 작업을 할당하기 전에 작업을 할당하기 위한 연산자원(프로세서)의 성능지수를 구하고, 이를 바탕으로 작업할당을 수행한다. 연산자원의 성능지수를 사용한 작업 할당 기법은 동적으로 변화하는 그리드 컴퓨팅 환경에서 보다 더 효과적인 작업할당 방법이다. 성능지수를 고려한 작업할당 방법이 고려하지 않은 방법에 비해 3 차원 Euler 방정식을 이용한 CFD 연산 작업의 연산시간을 단축함을 $K{\ast}Grid$ 환경에서 실험으로 확인하였다.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.1
• /
• pp.29-40
• /
• 2008

With the spread of mobile devices and advances in communication techknowledges, the needs of application which uses the movement patterns of moving objects in history trajectory data of moving objects gets Increasing. Especially, to design public transportation route or road network of the new city, we can use the similar patterns in the trajectories of moving objects that move on the spatial network such as road and railway. In this paper, we propose a spatio-temporal similar trajectory search algorithm for moving objects on road network. For this, we define a spatio-temporal similarity measure based on the real road network distance and propose a grid-based index structure for similar trajectory search. Finally, we analyze the performance of the proposed similar trajectory search algorithm in order to show its efficiency.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.393-398
• /
• 2015

City or Community-scale Energy Management System(CEMS) is used to reduce the total energy consumed in the city by arranging the energy resources efficiently at the planning stage and controlling them economically at the operating stage. Of the operational functions of the CEMS, generation forecasting of renewable energy resources is an essential feature for the effective supply scheduling. This is because it can develop daily operating schedules of controllable generators in the city (e.g. diesel turbine, micro-gas turbine, ESS, CHP and so on) in order to minimize the inflow of the external power supply system, considering the amount of power generated by the uncontrollable renewable energy resources. This paper is written to introduce numerical models for photo-voltaic power generation prediction based on the weather forecasting information. Unlike the conventional methods using the average radiation or average utilization rate, the proposed models are developed for CEMS applications using the realtime weather forecast information provided by the National Weather Service.

• Journal of the Society of Naval Architects of Korea
• /
• v.54 no.2
• /
• pp.132-142
• /
• 2017

As the International Maritime Organization (IMO) recently introduced the Energy Efficiency Design Index (EEDI) for new ships building and the Energy Efficiency Operational Indicator (EEOI) for ship operation, thus an accurate estimation of added resistance of ships advancing in waves has become necessary. In the present study, OpenFOAM, computational fluid dynamics libraries of which source codes are opened to the public, was used to calculate the added resistance and motions of the KCS. Unstructured grid using a hanging-node and cut-cell method was used to generate dense grid around a wave and KCS. A dynamic deformation mesh method was used to consider the motions of the KCS. Five wavelengths from a short wavelength (${\lambda}/LPP=0.65$) to a long wavelength (${\lambda}/LPP=1.95$) were considered. The added resistance and the heave & pitch motions calculated for various waves were compared with the results of model experiments.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.224-224
• /
• 2015

The East Asia monsoon is one of the most complex atmospheric phenomena caused by Land-Sea thermal contrast. It plays essential role in fulfilling the water needs of the region but also poses stern consequences in terms of flooding and droughts. This study analyzed the influence of Global Sea Surface Temperature Anomalies (SSTA) on occurrence of droughts in the East Asia monsoon region ($20^{\circ}N-50^{\circ}N$, $103^{\circ}E-149^{\circ}E$). Standardized Precipitation Index (SPI) was employed to characterize the droughts over the region using 30-year (1978-2007) gridded rainfall dataset at $0.5^{\circ}$ grid resolution. Due to high variability in intensity and spatial extent of monsoon rainfall the East Asia monsoon region was divided into the homogeneous rainfall zones using cluster analysis method. Seven zones were delineated that showed unique rainfall regimes over the region. The influence of SSTA was assessed by using lagged-correlation between global gridded SSTA ($0.2^{\circ}$ grid resolution) and SPI of each zone. Sea regions with potential influence on droughts in different zones were identified based on significant positive and negative correlation between SSTA and SPI with a lag period of 3-month. The results showed that SSTA have the potential to be used as predictor variables for prediction of droughts with a reasonable lead time. The findings of this study will assist to improve the drought prediction over the region.