• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1989년도 수공학논총 제31권
• /
• pp.123-132
• /
• 1989

자연하천에서의 흐름특성을 해석하기 위해 Boundary - fitted(BF) coordinate system을 응용하여 유한차분법에 의한 2차원모델을 개발하였다. BF coordinates는 경계면의 형상에 관계없이 적용할 수 있으며 모든 계산은 기본식의 좌표변환을 통해 직각좌표계에서 행해지므로 경계조건의 입력에 용이하다. Physical domain(X - Y 좌표계)에서 하천의 형상을 입력하면 Grid generation에 의해 모든 계산은 Computational domain($\varepsilon$ - n 좌표계)에서 행해진다. Computational domain에서의 유한차분법은 half - time step으로 ADI 방법을 이용했고, 한 방향의 유속과 수위를 Double sweep으로 풀었다. 유속, 수위 및 하상의 격점망은 Staggered grid system을 사용했으며 geometric elements는 각 격점별로 계산하였다. 본 모델을 이용하므로써 불규칙한 수로나 하천의 흐름상태를 해석할 수 있으므로 흐름의 종단, 횡단방향의 유속분포, Superelevation을 구할 수 있고 하천의 계획, 관리, 제방의 호안이나 구조물의 설치등으로 일어나는 수리학적 영향등을 예측할 수 있다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.43-48
• /
• 1998

The development of unsteady three-dimensional incompressible viscous solver based on unsteady physical curvilinear coordinate system is presented. A 12-point finite analytic scheme based on local uniform grid spacing is extended for nonuniform grid spacing. The formulation of a condition is suggested to avoid the oscillation of the series summations produced by the application of the method of separation of variables. SIMPLER and pressure Poisson equation techniques are used for solving a velocity-pressure coupled problem. The matrix is solved using the Generalized Minimal RESidual (GMRES) method to enhance the convergence rate of unsteady flow solver and the Kinematic boundary condition of a free surface flow. It is demonstrated that the numerical solutions of these equations are less mesh sensitive.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권3호
• /
• pp.437-446
• /
• 2003

A large eddy simulation (LES) is performed for turbulent pipe flow. The simulation code is constructed by using a general coordinate system based on the physical contravariant velocity components. The effects of grid fineness which can be well prediction of turbulent behavior in near wall region is investigated. The subgrid scale turbulent models are applied and validated emphasis is placed on the flow details of turbulent pipe flow The calculated Reynolds number is 360 based on the wall shear velocity and the inlet pipe diameter. The predicted turbulent statistics are evaluated by comparing with the DNS data of turbulent pipe flow Performed by Eggels et al. The agreement of LES with DNS data is shown to be satisfactory. The proper grid fineness of the well prediction of turbulent pipe flow is suggested and the turbulent behavior is analyzed by depict the contour plot of fluctuating velocity components.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권1호
• /
• pp.98-108
• /
• 2004

This study concerns a large eddy simulation (LES) of turbulent flow around a bluff body inside a sudden expansion cylindrical chamber, a configuration which resembles a premixed gas turbine combustor The simulation code is constructed by using the general coordinate system based on the physical contravariant velocity components. The Smagorinsky model is employed and the calculated Reynolds number is 5,000 based on the bulk velocity and the diameter of the inlet pipe. The combined grid technique and cylindrical grid are tested in the numerical simulation with complex geometry. The predicted turbulent statistics are evaluated by comparing with LDV measurement data. The numerical flow visualizations depict the behavior of turbulent mixing process behind the flame holder.

• 전기학회논문지
• /
• 제64권7호
• /
• pp.1005-1011
• /
• 2015

This paper proposes the DC offset compensation algorithm with fast response to the sensed grid voltage in the single-phase grid connected inverter. If the sensor of the grid voltage has problems, the DC offset of the grid voltage can be generated. This error must be resolved because the DC offset can generate the estimated grid frequency error of the phase-locked loop (PLL). In conventional algorithm to compensate the DC offset, the DC offset is estimated by integrating the synchronous reference frame d-axis voltage during one period of the grid voltage. The conventional algorithm has a drawback that is a slow dynamic response because monitoring the one period of the grid voltage is required. the proposed algorithm has fast dynamic response because the DC offset is consecutively estimated by transforming the d-axis voltage to synchronous reference frame without monitoring one cycle time of the grid voltage. The proposed algorithm is verified from PSIM simulation and the experiment.

• 한국군사과학기술학회지
• /
• 제21권4호
• /
• pp.471-480
• /
• 2018

Accurate target coordinate is very important in military operations especially field artillery's ground-to-ground attack and air-force's air-to-ground attack. DOS(or TAS) is used to acquire target coordinates from long distance. DOS is comprised of LRF and goniometer. LRF measures distance between DOS and target. Goniometer is comprised of azimuth and vertical angular sensors, DMC and internal GPS receiver. DOS must set the position and orientation(finding grid north) before measurement step(target coordinate acquisition). To improve accuracy of target coordinate, VRS RTK and reference point method are proposed in DOS setup step. VRS RTK provides accurate location coordinate with small deviations, providing high accuracy and precision in positioning and orientation. As a result, horizontal coordinate(easting and northing) accuracy is improved from 2.68 mil(C.L. = 0.95) mil to 0.58 mil(C.L. = 0.95).

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1707-1713
• /
• 2016

This paper proposes a dc error compensation algorithm using dq-synchronous coordinate transform digital phase-locked-loop in single-phase grid-connected converters. The dc errors are caused by analog to digital conversion and grid voltage during measurement. If the dc offset error is included in the phase-locked-loop system, it can cause distortion in the grid angle estimation with phase-locked-loop. Accordingly, recent study has dealt with the integral technique using the synchronous reference frame phase-locked-loop method. However, dynamic response is slow because it requires to monitor one period of grid voltage. In this paper, the dc offset error compensation algorithm of the improved response characteristic is proposed by using the synchronous reference frame phase-locked-loop. The simulation and the experimental results are presented to demonstrate the effectiveness of the proposed dc offset error compensation algorithm.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.483-487
• /
• 2011

In the present study, a CFD program based on a finite volume method was developed by using an unstructured polyhedral grid system for the accurate simulation with the complex geometry of computational domain. To simulate the transient flow induced by the moving solid object, the program used a fractional step method and a ALE (Algebric Lagrangian-Eulerian) method. The grid deformation for the moving of solid object were performed with a spring analogy based on the center coordinate of each computational grid. To verify the present program with these methodologies, the numerical results of the flow around the fixed and oscillating circular cylinder were compared with the previous numerical results.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.163-169
• /
• 1999

The numerical procedure has been developed for simulating incompressible viscous flow around a turbine stage with rotor-stator interaction. This study solves 2-D unsteady incompressible Navier-Stokes equations on a non-orthogonal curvilinear coordinate system. The Marker-and-Cell concept is applied to efficiently solve continuity equation. To impose an accurate boundary condition, O-H multiblocked grid system is generated. O-type grid and H-type grid is generated near and outer rotor-stator The cubic-spline interpolation is applied to handle a relative motion of a rotor to the stator. Turbulent flows have been modeled by the Baldwin- Lomax turbulent model. To validate present procedure, the time averaged pressure coefficients around the rotor and stator are compared with experiment and a good agreement obtained.

• 한국컴퓨터정보학회논문지
• /
• 제17권10호
• /
• pp.89-98
• /
• 2012

본 논문에서는 스마트그리드 환경에서 적용되고 있는 ZigBee 무선 통신 환경의 주소 지정 방식과 라우팅 알고리즘의 성능을 향상시키기 위한 새로운 좌표 값 알고리즘을 제안하였다. 수천 개의 네트워크 크기와 16비트 주소 할당은 빈번한 주소 충돌로 매우 혼잡스러울 수 있다. 따라서 16비트 주소 공간을 분할하여 사용하는 (x, y, z) 좌표축 주소 구조와 라우팅을 제안한다. (x, y) 좌표축 주소 할당은 센서노드가 지리적으로 가까운 라우터에게 연결되어 있어야 하기 때문에, 어떤 라우터는 많은 수의 하위 노드를 가질 수 없다는 문제점을 가지기 때문이다. 또한 제안한 주소 구조를 사용한 위치 기반 라우팅 알고리즘을 제안한다. 그 결과 각 노드에서 라우팅 시 적은 비트 연산과 멀티 홉을 감소시킬 수 있었고, 효과적인 주소 할당과 라우팅은 네트워크의 각 노드의 에너지 소비를 최소화 했다.