• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.503-509
• /
• 2016

To identify causes for drastic decrease in yield of tomato with repeated culturing number of the bag culture substrate of greenhouse tomatoes we investigated the physical and chemical properties of a coir used as the bag culture substrate to grow tomato at the Booyeo tomato experimental institute located in Booyeo, Chungnam Province for three years from 2012 to 2014. The results showed that total porosity ranged from 65.4 to 73.1% for the bulk densities of coir ranging from 0.12 to $0.14g\;cm^{-3}$. The volumetric water contents measured at 0.01 bar as air entry point were 25% (before), 33% ($1^{st}yr$), 45% ($2^{nd}yr$), and 37% ($3^{rd}yr$). Organic matter contents ranged from 82.0 to 96.2% (highest in $1^{st}yr$). pH and EC ranged from 4.47 to 6.47 (highest in $2^{nd}yr$), and from 22.2 to $53.5dS\;m^{-1}$ (highest in $1^{st}yr$) and cation exchange capacity ranged from 71.0 to $191.7cmol\;kg^{-1}$ (highest in $3^{rd}yr$). The surface structure observed with electrical microscope showed that the number of large pores decreased with increasing cultivating time while the proportion of smaller pores increased, indicating that the coir was consistently decomposed. Therefore, we could conclude that these changes of all physical and chemical properties of the coir may influence the holding capacities of water and nutrients, resulting in deterioration of quality of culture substrate of greenhouse tomatoes.

• Ecology and Resilient Infrastructure
• /
• v.2 no.2
• /
• pp.185-190
• /
• 2015

Greenhouse gas (GHG) emission from agricultural lands is recognized as one of important factors of global warming. The objective of this short communication was to evaluate the applicability of different soil GHG emission prediction models on agricultural systems in Korea. Four models, namely, DNDC, DAYCENT, EXPERT-N and COUP, were selected and the basic structure (e.g., components and sub-model), input variables, and output variables were compared. In particular, the availability and compilation of essential input variables were assessed. Major input variables needed for operating these predictive models were found to be available through database systems established by national organizations such as the Korea Meteorological Administration, the Korean Soil Information System, and the Rural Development Administration. However, in order to apply these models in Korea, it was necessary to calibrate and validate each of the models for the domestic landscape settings and climate conditions. In addition, field data of long-term monitoring of GHG emission from agricultural lands are limited and therefore should be measured.

• Journal of Korean Society of Forest Science
• /
• v.54 no.1
• /
• pp.68-75
• /
• 1981

The genetic structures at one leucine aminopeptidase locus (LAP-A) of acorns, seedling raised in greenhouse and forest form the two beech provenances. West Germany and Rumania, were investigated and compared with each other. In many pair wise comparisons significant differences in genotypic structure as well as genic structure were ascertained between different developmental stages. In both the provenances, the allele $A_2$ seems to have advantage at both seedling stages raised under two different conditions. Homozygous carriers of $A_2$ allele survived best in greenhouse, while heterozygous carriers especially with $A_2$ allele possessed great viability under more variable environmental conditions. Since a distinct different genetic background was present in two base populations, the identical effect of the allele $A_2$ confirms the adaptiveness of this locus. With aid of some measures such as viability parameter and genetic distance, the character of occurred viability selection of further explained. The possible significance of this locus at this early stage is discussed in relation to adaptation of this long lived tree species to heterogeneous environment.

• Journal of Bio-Environment Control
• /
• v.21 no.4
• /
• pp.459-465
• /
• 2012

This study analyzed the effect of semi-rigid rafter-purlin cross-linking connection and driven steel pipe base on the static behavior of plastic greenhouse (PG). To promote the time and cost efficiency of the assembly process, each cross-linking connections of space arch type grid that consists of rafter and purlin is linked with steel-wire buckles, and each end of the rafters was driven directly to the ground to support the PG structure. However, in the design process, cross-linking connections and bases are idealized by being categorized as fully rigid or frictionless pinned, which does not appropriately reflect actual conditions. This study takes a full-scale loading test of PG and analyzes the effect of member cross-linking connections and driven steel pipe base on the behavior of a structure. The analysis provided a basis for determining the rigidity factor of member cross-linking nodes needed for finite element analysis, and the reliability of the result regarding the static behavior of PG.

• Korean Journal of Organic Agriculture
• /
• v.19 no.3
• /
• pp.343-355
• /
• 2011

This work was studied the effects of spore density and infection of arbuscular mycorrhizal fungi (AMF) for no-tillage organic cultivation of pepper with wintering green manure crops cultivation in greenhouse field. Spore density of arbuscular mycorrhizal fungi (AMF) in green manure crops was 189 spores/30g fresh soils in control including alive spore (82 spores). Spore density of AMF in all green manure crops was totally 196~226 spores/30g fresh soil and alive spore was 84~112 spores/30g fresh soil. Spore density of AMF in soils of Pepper crop was range of 48.0~56.7 spores/30g fresh soils after cultivation of green manure crops. Infection structure of AMF was not significantly difference in soils of green manure crops and Pepper crop after cultivation of green manure crops. Infection rate of AMF in roots of green crops was low level by 2.8% in giant chickweed, 7.4% in rye, 9.3% in hairy vetch. Infection rate of AMF in roots of barley was the highest level by 20.3%. Infection rate of AMF in roots of Pepper crop was range of 5.2~7.2% after cultivation of green manure crops Also, infection rate of AMF in roots of Pepper crop was 8.1% after the harvest of barley. Infection structure of AMF in barley very well consisted of network with internal hyphae, while hairy vetch and rye tended to no network. There was not a significant relationship between spore density in soils and infection rate of AMF in rhizosphere of Pepper.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.6
• /
• pp.596-605
• /
• 2018

Interest in hydrogen, as an energy carrier, has been growing to solve the problems on shortage of fossile fuels and greenhouse gas. According to the standard KGS FU 551 for stationary fuel cell installation, the fuel cell system could be connected up to two common exhausts to one floor. depending on the required power for building or the installation environment in buildings, multiple fuel cell systems could be installed. Afterwards the number of perforations and flues could be decided. Hence, economic efficiency in significantly determined with respect to installation area and the number of fuel cell systems. In addition, the complexity of common vent structure for stationary fuel cell systems could be changed. In this paper, Verification experiments were conducted by connecting the common exhaust system to the fuel cell simulation system and the actual fuel cell system. Humidity and temperature were changed at ON/OFF, but no factors were found to affect performance or system malfunction. Exhaust emissions were also measured to obtain optimized values. We intend to expand the diffusion of stationary fuel cells by verifying safety of common exhaust structure.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.440-447
• /
• 2020

The demand for large-scale horticultural complexes utilizing reclaimed lands is increasing, and one of the pending issues for the construction of large-scale facilities is to establish foundation design criteria. In this paper, we tried to review previous studies on the method of reinforcing the foundation of soft ground. Target construction methods are spiral piles, wood piles, crushed stone piles and PF (point foundation) method. In order to evaluate the performance according to the basic construction method, pull-out resistance, bearing capacity, and settlement amount were measured. At the same diameter, pull-out resistance increased with increasing penetration depth. Simplified comparison is difficult due to the difference in reinforcement method, diameter, and penetration depth, but it showed high bearing capacity in the order of crushed stone pile, PF method, and wood pile foundation. In the case of wood piles, the increase in uplift resistance was different depending on the slenderness ratio. Wood, crushed stone pile and PF construction methods, which are foundation reinforcement works with a bearing capacity of 105 kN/㎡ to 826 kN/㎡, are considered sufficient methods to be applied to the greenhouse foundation. There was a limitation in grasping the consistent trend of each foundation reinforcement method through existing studies. If these data are supplemented through additional empirical tests, it is judged that a basic design guideline that can satisfy the structure and economic efficiency of the greenhouse can be presented.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.95-103
• /
• 2019

Temperature and relative humidity are important factors in crop cultivation and should be properly controlled for improving crop yield and quality. In order to control the environment accurately, we need to predict how the environment will change in the future. The objective of this study was to predict air temperature and relative humidity at a future time by using a multilayer perceptron (MLP). The data required to train MLP was collected every 10 min from Oct. 1, 2016 to Feb. 28, 2018 in an eight-span greenhouse ($1,032m^2$) cultivating mango (Mangifera indica cv. Irwin). The inputs for the MLP were greenhouse inside and outside environment data, and set-up and operating values of environment control devices. By using these data, the MLP was trained to predict the air temperature and relative humidity at a future time of 10 to 120 min. Considering typical four seasons in Korea, three-day data of the each season were compared as test data. The MLP was optimized with four hidden layers and 128 nodes for air temperature ($R^2=0.988$) and with four hidden layers and 64 nodes for relative humidity ($R^2=0.990$). Due to the characteristics of MLP, the accuracy decreased as the prediction time became longer. However, air temperature and relative humidity were properly predicted regardless of the environmental changes varied from season to season. For specific data such as spray irrigation, however, the numbers of trained data were too small, resulting in poor predictive accuracy. In this study, air temperature and relative humidity were appropriately predicted through optimization of MLP, but were limited to the experimental greenhouse. Therefore, it is necessary to collect more data from greenhouses at various places and modify the structure of neural network for generalization.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.495-503
• /
• 2019

Approximately 90,000 ships are registered in South Korea, and about 80,000 of these ships are used in domestic shipping. Among these, 84% are small ships, such as a fishing vessels that weigh less than 20 tons and are made mostly of an FRP (Fiber Reinforced Plastics). When this fact is taken into account, the greenhouse gas emissions that are released per ton of a composite vessel are sizeable. In this study, the laminated structures of an FRP fishing vessel, many of which currently are being built in Korea, were analyzed by ISO (International Organization for Standardization) and international design rules, and the structures of the hulls are lightweight with optimum glass fiber mass content as determined by the laminate weight minimization algorithm. As a result, it was confirmed that the laminations of the vessels in accordance with the Korean rule could have 6.4% to approximately 11% more design margin compared to the requirements of ISO and other international rules. And the case study of the application of the laminate weight minimization algorithm showed the possibility of reducing the weight of the hull bottom plating by as much as about 19.32% and by as much as about 18.06% in the overall structure.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.4
• /
• pp.29-38
• /
• 2012

Drip irrigation is a affordable irrigation under structured cultivation. Drip irrigation system with high uniformity can be achieved through effective design, maintenance and management of irrigation systems. Nevertheless the design guidelines have not been established for the drip irrigation system products in domestic and imported considering cultivation method and greenhouse environment in Korea. The objectives of this study were to evaluate the performance of drip irrigation system with uniformity through an experiment. The experiment was conducted to study with nine different types of emitters produced in domestic and imported. Hazen-Williams coefficients were also estimated for the drip emitter through hydraulic simulation for design use. It was found that approximately 91.5 % for 10 cm emitter spacing and 96.2 % for 30 cm emitter spacing of statistical uniformity were observed in respectively. Average emission uniformity was decreased as the reduction of emitter spacing. The results would be used in the drip irrigation system design and guideline construction.