• The Journal of Sustainable Design and Educational Environment Research
• /
• v.16 no.1
• /
• pp.12-19
• /
• 2017

This study investigates and analyzes the current status of green building certification (ESGB) in China, which is experiencing serious environmental pollution due to rapid economic development as an international pending issue for green growth, It is a basic research. This will be used as a resource to contribute to the reduction of carbon emissions in the future construction sector. The research method is to investigate the status of green building certification and the types of facilities in the whole of China, and to examine the evaluation criteria and items of ESGB 2014 and analyze the differences with ESGB 2006. Most of the research methods are based on the literature review and refer to the website of China Green Building Evaluation and the data of China Urban Science Institute.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.17 no.3
• /
• pp.9-16
• /
• 2018

This research is intended to propose future research directions by identifying differences between Korea and China's public facilities at the time of introduction and presenting improvement measures by comparing the criteria for green building certification. The study focuses on the comparison of Korea's G-SEED 2016 and China's ESGB 2014. For data related to green building certification in Korea, refer to the Construction Technology Research Institute Green Building Certification Criteria 2016 v1.2 Guide for New Housing. A study on the Green Building Certification System in China referred to the Green Building Assessment Standards. Comparisons were made between G-SEED 2016 general building certification review criteria and ESGB 2014 public facility certification criteria, and certification methods, essential items and specialties for each area.

• Structural Engineering and Mechanics
• /
• v.83 no.1
• /
• pp.19-29
• /
• 2022

The angle steel frame confined concrete columns (ASFCs) are an emerging form of hybrid columns, which comprise an inner angle steel frame and a concrete column. The inner angle steel frame can provide axial bearing capacity and well confining effect for composite columns. This paper presents the experimental and theoretical studies on the seismic behaviour of ASFCs. The experimental study of the 6 test specimens is presented, based on the previous study of the authors. The theoretical study includes two parts. One part establishes the section analysis model, and it uses to analyze section axial force-moment-curvature. Another part establishes the section moment-curvature hysteresis model. The test and analysis results show that the axial compression ratio and the assembling of steel slabs influence the local buckling of the angle steel. The three factors (axial compression ratio, content of angle steel and confining effect) have important effects on the seismic behaviour of ASFCs. And the theoretical model can provide reasonably accurate predictions and apply in section analysis of ASFCs.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.155-156
• /
• 2023

This study aims to analyze the factors that cause differences in the evaluation results of the life cycle carbon emissions assessment of buildings in both Korea and China as part of the methodology research of building life cycle assessment for Chinese buildings to promote building life cycle assessment in China. Specifically, it examines the building LCA standards of Korea and the standard for building carbon emission calculation in China as mentioned in the green building certification systems of both countries. Based on the investigation of the two standards, the life cycle carbon emissions of the evaluation target building were evaluated using the building life cycle assessment methods of both countries, and the influencing factors that cause differences in the life cycle carbon emission assessment results of the two countries were analyzed.

• International Journal of High-Rise Buildings
• /
• v.6 no.4
• /
• pp.323-326
• /
• 2017

Sustainability is becoming more and more important in our everyday lives. Thus, it is apparent that more sustainable initiatives are incorporated in a building design concept to reduce operation costs and environmental impacts. However, will the construction cost go up if the building is going green - especially if it is a tall building? This is the question on everyone's mind. In the following paragraphs, we will look into a case study of a skyscraper in Nanning, China. That 411-metre skyscraper, Nanning China Resources Centre East Office Tower, is currently under construction. Designed to LEED-CS Gold standards, the building has adopted a number of sustainable design elements and operation practice, which indeed only accounts for a small percentage of the total construction cost.

• Structural Engineering and Mechanics
• /
• v.73 no.5
• /
• pp.529-542
• /
• 2020

As limited well-documented experimental data are available for assessing the attributes of different deformation components of flanged walls, few appropriate models have been established for predicting the inelastic responses of flanged walls, especially those of asymmetrical flanged walls. This study presents the experimental results for three large-scale T-shaped reinforced concrete walls and examines the variations in the flexural, shear, and sliding components of deformation with the total deformation over the entire loading process. Based on the observed deformation behavior, a simple model based on moment-curvature analysis is established to estimate flexural deformations, in which the changes in plastic hinge length are considered and the deformations due to strain penetration are modeled individually. Based on the similar gross shapes of the curvature and shear strain distributions over the wall height, a proportional relationship is established between shear displacement and flexural rotation. By integrating the deformations due to flexure, shear, and strain penetration, a new load-deformation analytical model is proposed for flexure-dominant flanged walls. The proposed model provides engineers with a simple, accurate modeling tool appropriate for routine design work that can be applied to flexural walls with arbitrary sections and is capable of determining displacements at any position over the wall height. By further simplifying the analytical model, a simple procedure for estimating the ultimate displacement capacity of flanged walls is proposed, which will be valuable for performance-based seismic designs and seismic capacity evaluations.

• Earthquakes and Structures
• /
• v.18 no.1
• /
• pp.15-25
• /
• 2020

The seismic behaviour of reinforced concrete (RC) columns made from high-strength materials was investigated experimentally. Six high-strength concrete specimen columns (1:4 scale), which included three with high-strength stirrups (HSSs) and three with normal-strength stirrups (NSSs), were tested under a combination of high axial and reversed cyclic loads. The effects of stirrup strength and the ratio of transverse reinforcement on the cracking patterns, hysteretic response, strength, stiffness, ductility, energy dissipation and strain of transverse reinforcement were studied. The results indicate that good seismic behaviour of an RC column subjected to high axial compression can be obtained by using a well-shaped stirrup. Stirrup strength had little effect on the lateral bearing capacity. However, the ductility was significantly modified by improving the stirrup strength. When loaded with a large lateral displacement, the strength reduction of NSS specimens was more severe than that of those with HSSs, and increasing the stirrup strength had little effect on the stiffness reduction. The ductility and energy dissipation of specimens with HSSs were superior to those with NSSs. When the ultimate displacement was reached, the core concrete could be effectively restrained by HSSs.

• Advances in concrete construction
• /
• v.9 no.2
• /
• pp.125-137
• /
• 2020

As confining materials for concrete, steel and fibre-reinforced polymer (FRP) composites have important applications in both the seismic retrofit of existing reinforced concrete columns and in the new construction of composite structures. We present a comprehensive review of the axial stress-strain behaviour of the FRP-confined concrete column. Next, the mechanical performance of the hybrid FRP-confined concrete-steel composite columns are comprehensively reviewed. Furthermore, the results of FRP-confined concrete column experiments and FRP-confined circular concrete-filled steel tube experiments are presented to study the interaction relationship between various material sections. Finally, the combinations of material sections are discussed. Based on these observations, recommendations regarding future research directions for composite columns are also outlined.

• Journal of Korea Trade
• /
• v.26 no.4
• /
• pp.39-62
• /
• 2022

Purpose - Along with the growing awareness of environmental sustainability, international green entrepreneurship is expected to realize international sustainable development (ISD) by introducing ecological innovation results, using fewer resources consumption, and reducing negative environmental impacts. Building upon contingency theory and social network theory, this paper attempts to explore the role of home country-based networks (technology ties and business ties) as contingent factors that might impact the effectiveness of entrepreneurial orientation (EO) in promoting ISD among green ventures. Design/methodology - Original data were collected from 127 green ventures in China based on the random sampling technique. These green ventures mainly focus on the lower use of energy or materials, lower CO2 emissions, and higher ecological benefits located in the Fujian province, which highlights green economic growth and economic cooperation with international markets. Moderated hierarchical linear regression analysis was conducted to test our hypotheses concerning the main relationship between EO (innovativeness, proactiveness, and risk-taking) and ISD as well as the moderating effects of home country-based networks (technology ties and business ties) on the main relationship. Findings - Empirical results indicate that: first, both innovativeness and proactiveness positively affect ISD; second, both technology ties and business ties at home might significantly strengthen the positive relationship between innovativeness (or proactiveness) and ISD. However, this study did not find significant moderating effects of technology ties or business ties at home on the relationship between risk-taking and ISD. Originality/value - Since previous literature often gives more focus on the host country context of social networks, this study shifts to a home country-based network context. Therefore, our research might enrich the international green entrepreneurship literature by empirically investigating the contingent value of home country-based networks in the relationship between EO and ISD in the context of an emerging economy such as China.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.24-31
• /
• 2017

As the concept of sustainability becomes more and more popular, a large amount of literature have been recorded recently on intelligent green building and smart city (IGB&SC). It is therefore needed to systematically analyse the existing knowledge structure as well as the future new development of this domain through the identification of the thematic trends, landmark articles, typical keywords together with co-operative researchers. In this paper, Citespace software package is applied to analyse the citation networks and other relevant data of the past eleven years (from 2006 to 2016) collected from Web of Science (WOS). Through this, a series of professional document analysis are conducted, including the production of core authors, the influence made by the most cited authors, keywords extraction and timezone analysis, hot topics of research, highly cited papers and trends with regard to co-citation analysis, etc. As a result, the development track of the IGB&SC domains is revealed and visualized and the following results reached: (i) in the research area of IGB&SC, the most productive researcher is Winters JV and Caragliu A is most influential on the other hand; (ii) different focuses of IGB&SC research have been emerged continually from 2006 to 2016 e.g. smart growth, sustainability, smart city, big data, etc.; (iii) Hollands's work is identified with the most citations and the emerging trends, as revealed from the bursts analysis in document co-citations, can be concluded as smart growth, the assessment of intelligent green building and smart city.