• 한국주조공학회지
• /
• 제30권3호
• /
• pp.115-120
• /
• 2010

Recently, an advanced raw material supplying system in diecasting industry that molten metal produced by the raw material supplier can be directly delivered to the diecasting shops was proposed. It was known to have advantages of reducing melting process cost and improving working environment. However, for its successful mass production, the development of high insulation ladle is inevitable. In this study, the optimal mixing ratio of $SiO_2-Al_2O_3$ was investigated and the high insulation ladle with computer simulation result was built in a prototype and evaluated. The prototype which has refractory wall of $SiO_233%-Al_2O_3$ 35%-CaO 33% showed high insulation sufficient for carrying the Al molten metal for 138 minutes. Gas quantity result and SEM-EDS analysis on the melt poured in the ladle also showed extremely low level of 0.028 cc / 100 g and no penetration of Al molten metal into the refractory wall, satisfying the requirements for mass production.

• 한국항해항만학회지
• /
• 제28권9호
• /
• pp.809-813
• /
• 2004

Experiments revealed that green water phenomena resemble dam-break, in which flow over deck edge forms a vertical wall of water and suddenly falls down into deck. In this paper the dam breaking problems were formulated using Glimm's algorithm, so-rolled, Random Choice method and, several validations were presented.

• 인간식물환경학회지
• /
• 제23권2호
• /
• pp.179-189
• /
• 2020

In order to increase the indoor air purification effect of plants, plants need to be placed on 5-10% of indoor spaces. To increase the density and utilization of plants in indoor spaces, studies on bio-wall, a vertical green wall system, have been recently conducted. The purpose of this study was to investigate the growth characteristics of 7 indoor plants introduced to the system and their rooting zones at different irrigation cycles. This study was conducted to investigate a proper irrigation cycle for the continuous maintenance of bio-wall systems. The conditions of their growth environment were maintained as follows: light intensity, 20-50 μmol·m^-2·s^-1 PPFD; and temperature, 20 - 25℃. For fertilization, Hyponex diluted with water at the ratio of 1:1,000 was supplied to plants. Irrigation was treated at intervals of 1, 3, 5, and 7 days for 1 hour at a time. As a result, there was no significant difference in the growth of plants between different irrigation cycles. Dieffenbachia 'Marianne' showed a significant decrease in the number of leaves at the irrigation cycle of 7 days. In addition, the chlorophyll content was relatively low at the irrigation cycle of 7 days. In terms of the color of leaves, a decrease in L value and b value and an increase in a value were observed, resulting in changes in brightness and color. Ardisia pusilla 'Variegata' showed a slightly higher photosynthetic activity and stomatal conductance when it was watered every day and once per 5 days, while Epipremnum aureum showed a relatively higher photosynthetic activity and stomatal conductance at the irrigation cycle of 3 days. In the case of root activity, it was found that the longer irrigation cycle, the higher root activity compared to daily irrigation. The development of roots of Peperomia clusiifolia was promoted by watering at long intervals. However, in the case of Aglaonema 'Siam-Aurora', the total number of roots decreased at the interval of 7 days. In conclusion, a proper irrigation cycle for the sustainable maintenance of vertical bio-wall systems seems to be 3 days.

• 대한조선학회논문집
• /
• 제49권1호
• /
• pp.79-86
• /
• 2012

It is very important to investigate and understand the motion of a FPSO on waves because green water phenomenon occurs owing to the relative motions between incident waves and a ship on them. In this research, both experimental and some numerical approaches have been performed in head sea conditions with regular waves. As an object model of this research, a FPSO model is set free to heave and pitch during the experiments. Also, the motions of the FPSO model which are the results of the experiments are used for the corresponding numerical computations. The purpose of this study is to clarify the effect of bow flare on green water load. In this research, it is found that the amount of green water entered from the side of bow is decreased by the increase of bow flare angle. Moreover, the relation between the green water on the bow upper deck and the impact load on the vertical wall located at turrethead is investigated. The results of this research could be used as one of the fundamental data to design bow flares. Also, an optimized bow flare angle is proposed in this study.

• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.140-147
• /
• 2011

The strength properties of wooden retaining wall which was made with pitch pine were evaluated. Wooden retaining wall was made with diameter 90 mm of pitch pine round posts treated with CUAZ-2 (Copper Azole). The length of the front stretcher of the retaining wall was 3,000 mm. The distance between the headers (the notched member) is 1,000 mm in center and is 900 mm in side. There were connections every 2,000 mm because actually the length of stretcher is limited in the retaining wall. The strength test was carried out according to connection type because the section between stretchers can act as a defect. A result of the strength test according to connection type confirms that connection does not act as defect because the strength of retaining wall in single stretcher is similar to that in the section between stretchers. The strength test of the wooden retaining wall was carried out in 5 types according to the condition of the base section. When the upper soil pressure was 9.8 kN/$m^2$, the maximum load of the retaining wall fixing the front foundation shows higher values than those of others. But the total deformation is lower in the retaining wall not to fix a base section than in that to fix a base section. It is thought that the retaining wall not to fix a base section shows low value because the deformation is distributed throughout the retaining wall and it is confirmed that the soil pressure affects supporting the structure because the deformation of the retaining wall under low pressure is 3~4 fold higher than those of others. The failure mode of the retaining wall is the overturning type because the high section is deformed. Mostly, the failure mode is the separation of the header in the notched section.

• 한국환경과학회지
• /
• 제20권11호
• /
• pp.1417-1423
• /
• 2011

본 연구는 용기형 벽면녹화에서 유기질비료의 비율에 따른 노랑조팝나무의 생육을 실험적으로 평가함으로써, 빗물활용을 위한 적합한 식재지반 조성과 벽면녹화 수종으로서 관목류의 활용성을 높이고자 하며, 그 결과는 다음과 같다. 1. 6월 무강수 실험기간 동안 용기형 벽면녹화 식재지반 내 토양수분함량을 중량단위로 측정한 결과, $A_1L_1$ > $A_2L_1$ > $A_4L_1$ > $A_8L_1$ > $A_1L_0$ 순으로, 유기질비료의 비율이 높을수록 완만하게 감소하였다. 2. 유기질비료 배합비율에 따른 노랑조팝나무의 생육은 대조구인 $A_1L_0$과 비교해 볼 때, 실험구별 생육 차이는 확연하지 않았으나 $A_2L_1$이 전체 처리구 중 가장 양호한 생육상태를 보였다. 3. 생존율은 대조구인 $A_1L_0$에서 모든 식물이 고사한 반면, 유기질비료 비율이 높을수록 생존율은 향상되었다. 이러한 실험적 결과를 통해, 빗물활용 용기형 벽면녹화에서 유기질비료는 노랑조팝나무의 생육보다는 생존을 향상시키는 것으로 나타나, 빗물만으로 물공급이 이루어지는 벽면녹화에 건조기를 대비할 수 있는 녹화방안이라 본다. 또한 이와 더불어 식재지반 내 토양수분함량을 높이기 위한 토양개량제나 빗물저류시스템의 연계가 고려된다면 노랑조팝나무는 용기형 벽면녹화에 활용가능성이 높은 관목이라 판단된다.

• 전기학회논문지
• /
• 제58권6호
• /
• pp.1151-1156
• /
• 2009

Unstable sustain discharges can occur at the bottom cells of the panel at high temperature. To solve this problem, the wall charge variation during an address period was investigated. A test panel of 7.5 inch XGA level was used and one green cell was measured. In order to realize operating condition equal to that of the bottom cells of 50 inch panel, the addressing stress pulses are applied. It seems that the resultant wall charge loss during address period increased with increase of stress time, temperature, pressure and Xe %. Wall charge loss increases with potential difference between scan electrode and address electrode, therefore wall charge loss can be minimized by the increase of scan voltage during address period.

• 한국식품저장유통학회지
• /
• 제2권1호
• /
• pp.185-193
• /
• 1995

This paper was investigated the changes of the cell wall components, enzyme activities during ripening of jujuba fruits for elucidating the softening metabolism of jujuba fruits. Firmness were decreased during ripening. Moisture content did not show any notable cahanges until ripening stage but they decreased a little In overripe jujuba fruits. Polygalacturonase activities were not detected at nature green stage and $\beta$-galactosidase activities were until turning stage. But polygalacturonase activities in ripening and overripening were 51.31 and 100.72 units/100g-fr, wt. respectively. $\beta$-galactosidase activities were 16.05 and 182.55units/100g-fr. wt. in the same stages. The content of water-soluble protein was increased in overripening. Stage the contents of cell wall and alcohol-insoluble material were. decraesed during maturation, but water-soluble material was increased. The pectin and alkali-soluble hemicellulose were increased until ripening stage, but decreased in overripe jujube fruits. The total pectin and insoluble pectin during ripening, but decreased in overripe jujuba fruits.

• 한국전자파학회논문지
• /
• 제12권6호
• /
• pp.931-939
• /
• 2001

DBS(Direct Broadcast Satellite) 수신용 radial-line slot antenna(RLSA)의 설계를 위한 슬롯을 통한 결합 특성을 해석하였다. RLSA에서 이미 제안된, narrow wall이 주기 경계 조건(periodic boundary condition)을 만족시키고 wide wall에 슬롯이 주기적으로 배열되어 있는 구형 도파관 모델을 이용하였다. 자장 적분 방정식과 필요한 그린 함수를 유도하여 모멘트 법으로 풀었다. 이때 수치 해석의 효율을 극대화하고 그린 함수에 의한 특이점 문제를 해결하기 위해 entire domain 기저 함수와 sub-domain 기저 함수를 모두 사용하였다. 한편 그린 함수를 빠르게 계산하기 위한 가속화 방법으로 구형 도파관 영역은 Ewald합 기법을, 반공간 영역은 Shanks 변환을 이용하였다. 시뮬레이션 결과로부터 RLSA의 설계에 이용되는 다양한 변수들이 결합에 미치는 영향을 예측할 수 있었다.

• 한국환경복원기술학회지
• /
• 제11권1호
• /
• pp.62-71
• /
• 2008

Recently, the expansion of housing developments has reduced green areas in cities. The reduction of green areas caused many negative effects on human beings. For functional improvement of ecosystem, government focuses on artificial ground greening because it gives improving microclimate and saving energy consumption. This research aims to develop the system to support decision making of greening for artificial ground greening. This system consist of rooftop greening, wall greening, and street greening system which can suggest proper type of greening and calculate the effect of the greening considering the proponents inputs. It presents social, economic, and ecological value such as cost, energy saving, and temperature reduction. As it is web-based system users can easily access with internet. This system provides automatic selection modes.As a result, with this developed web-based system, decision makers can evaluate the effect of artificial ground green easily and the support to such movement will increase.