• Journal of the Korean Society of Tobacco Science
• /
• v.25 no.1
• /
• pp.7-11
• /
• 2003

Repellencies of herb plants and essential oils against alate Myzus persicae were investigated in a insect cage, a screen house, and a tobacco field. Numbers of nymphs deposited by alate or apterous Myzur persicae were lower on rosemary(Rosmarinus officinalis), silver thyme (Thymus vulgaris), and lemon balm(Melissa of fcianazis). Rosemary and silver thyme show little repellency against alate Myzus persicae on a nearby tobacco plant Rosemary oil, peppermint (Mentha piperita) oil, and ginger oil showed repellency against alate Myzus persicae, but spearmint (Mentha spicata) oil and lavender oil showed little repellency in a screen house. Rosemary oil, ginger oil, peppermint oil, lavender oil, and spearmint oil showed repellency against alate Myzus persicae in a tobacco field, but there was no significant difference among oils.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.54-61
• /
• 1998

The subsurface environment of the root zone area can set the stae for "do or die" of the turfgrass plant. The good condition of the greens is verified by their physical properties. Therefore, this study was carried to evaluate on the existing green of Hwasan C.C. by undisturbed soil Core Anaysis. We completed the ISTRC SYSTEM BenchMarking of the undisturbed core samples taken from Green #1, Green #5, Green #9-"Best" area, and Green #9-"Stressed" area for the Hwasan C.C.. It was also our understanding that the greens were in "good" to "very good" conditioni. THe exception might be Green #9-"Stress" area, which was the stressed area. The stressed area was confined to a ridge across Green #9. The organic content test results comfirmed the development of organic layering in depth 0-2.5cm. For the amount of compaction in the upper root zones and te development of the green's respective organic layers, the infiltration rates were high in Green #1, Green #5, and Green #9 "Stressed" area. The depicted aerificaton hole might be the probable cause of the relatively high infiltraton rate. Green #9-"Best" area had a tested infiltration rate of 18.75cm/hr. Either this area had not been aerified, or the undisturbed sample did not contain a aerification cavity. The water retention capacity of the undisturbed samples was good. When the greens were first constructed, the original root zone mix had been relatively low water retention properties. And the bulk density and the porosity of the undisturbed samples were good. In the result, all the greens were similar except for the infiltration. Thus, we supposed that Green #9-"Stressed" area might be ainly influenced by the amount of irrigation water and the configuration of the green's surface. There had been a reduction in the amount of irrigation water as the water retention capacity in the greens was promoted. Especially, it had gradually become more of a problem as the green had matured in Green #9-"Stressed" area. Because Green #9-"Stressed" area was a ridge area. The reduction in the amount of irrigation water might be the probable cause of the stress in Green #9-"Stressed" area. Our final observation related to the soil texture and the particle size distribution of the sand. Though and sand contant of all the tested greens were good, the gravel content of them exceeded ISTRC Guidelines. In particle size distribution of the sand, the very coarse and the coarse content of all the tested greens exceeded, but the rest was insufficient. The stability is a function of the material retained on the 0.25mm mesh screen. But, the content of all the tested greens was very insufficient. Though all the greens was serviceable, the coarse root zone sands, such as the sand in the tested greens, tended to be "unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.;unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.ines.

• Journal of the Korean Ceramic Society
• /
• v.41 no.6
• /
• pp.456-463
• /
• 2004

To enhance the performance of anode-supported SOFC, single cell fabrication procedure was changed for better and resulting power generating characteristics of single cell were investigated. Liquid condensation process was employed for the granulation of NiO/YSZ powder mixture and the produced powder granules were compacted into anode green substrate by uni-axial pressing. YSZ electrolyte was printed on green substrate via screen-printing method and co-fired at 1400$^{\circ}C$ for 3 h. LSM/YSZ composite cathode of which the composition and heat treatment condition was adjusted to minimize the polarization#resistance with AC-impedance spectroscopy, was screen printed. The final single cell size from this multi-step procedure was 5${\times}$5 $\textrm{cm}^2$ and 10${\times}$10 $\textrm{cm}^2$. The maximum power densities of 5${\times}$5 and 10${\times}$10 single cells were about 0.45 W/$\textrm{cm}^2$ and 0.22 W/$\textrm{cm}^2$ at 800$^{\circ}C$, which are two times superior than those from single cells fabricated by the conventional process in previous our work.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.07a
• /
• pp.151-156
• /
• 2001

Using the photoimageable thick film conductors, $25\mu\textrm{m}$ line widths and $25\mu\textrm{m}$ spaces can be obtained. Test patterns are made by green tape lamination, paste printing, exposing to UV light, developing in an aqueous process and cofiring. Postfiring method using alumina substrate can be also applied to fine line formation. Series gap resonator formed by photopatterning process showed the improved signal transmission characteristics compared to that obtained by conventional screen printing.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.268-269
• /
• 2003

삼성전자는 LCD 방식에 이은 3세대 프로젝션 모델로 평가받는 DMD (Digital Micromirror Device) 기술을 채용한 43‘’, 50‘’, 61‘’ DLP (Digital Light Processing) 프로젝션 TV를 개발 시판하고 있다. DMD 기술이란 921,600개의 미세한 거울들이 신호에 따라 반사각도를 조절하며 이미지를 구현하는 기술이다. 삼판식 프로젝션 시스템의 단점을 개선, 경박단소와 저가격화를 위하여 단판식을 이용하는 DLP 프로젝션 TV 의 경우 Red, Green, Blue 로 이뤄진 칼라휠을 회전시킴으로서 DMD 위에 연속적으로 삼색의 영상을 재생하여 색을 분리 합성한다. (중략)

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.1085-1087
• /
• 2002

To have cost down and get improved image quality and performance of plasma display panel, several factors have been developed including development of low price material and improvement in production for PDP front plate. In this work, viscosity and surface characteristics of transparent dielectric were investigated to find the optimum and low price materials fabrication condition of transparent dielectric paste. It was found that uniformity and transmissivity of green and fired dielectrics had some relationship with the kinds and content of binder, and solvent as well.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.4
• /
• pp.187-193
• /
• 2010

The colored films formed on 304 stainless steel plates by immersion treatment and electrochemical one in a solution containing sulphuric acids and chromic acids were studied by SEM, AES, and spectrophotometer. The thicknesses of the films by 20 minutes treatment were about 200 nm and it became thinner as the treatment times were increased. The surface texture showed a tortuous network of interlinking pathways. The color of the 304 steel surface changed from metallic white to gray, black, red, yellow-green, and green-blue, gradually, by the treatment time was increased. The reflectivity measured by UV-VIS-NIR spectrophotometer was reduced from max. 38% of basis metal to min. 3.5% of colored surface.

• Journal of Environmental Science International
• /
• v.14 no.8
• /
• pp.719-722
• /
• 2005

This study is to find the effective way to green perpendicular wall spaces as soon as possible and to get basic data for activating the perpendicular greening on high story building through the experiment of container-type planting ground in which lightened artificial soil mixed with rock wool was put. Comparative studies of the sizes of containers and soil were carried out but separate management was not performed. Four plants(Euonymus fortunei var. radicans, Lonicera japonica, Parthenocissus quinquefolia, Parthenocissus tricuspidata) which have the capability to cover and screen perpendicular spaces were used in the experiment. In result, a container must be equipped with over 15cm depth soil mixed with less than $30\%$ of rock wool.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.98-99
• /
• 2013

Recently, solar control facade systems are highlighted due to its low cost and outstanding applicability for green remodeling. However, it has not been long time since the systems were introduced. Therefore, the application study of the solar control system also has been insufficient. In this study, simulated models were developed and three types of solar control systems(i.e., overhang, blind, and screen)are installed in the models. The efficiency of energy savings and investment payback period according to the application of solar control facade system were analyzed.

• ALGAE
• /
• v.28 no.4
• /
• pp.379-387
• /
• 2013

The purpose of this study was to express bovine lactoferrin N-lobe in Chlorella vulgaris, a green microalga, using the pCAMBIA1304 vector. Chlorella-codon-optimized bovine lactoferrin N-lobe (Lfb-N gene) was cloned in the expression vector pCAMBIA1304, creating the plasmid pCAMLfb-N. pCAMLfb-N was then introduced into C. vulgaris by electro-transformation. Transformants were separated from BG-11 plates containing 20 ${\mu}g\;mL^{-1}$ hygromycin. Polymerase chain reaction was used to screen transformants harboring Lfb-N gene. Finally, total soluble protein was extracted from the transformants, and the expression of Lfb-N protein was detected using western blotting. Using this method, we successfully expressed bovine lactoferrin in C. vulgaris. Therefore, our results suggested that recombinant lactoferrin N-lobe, which has many uses in the biomedical and pharmaceutical industries, can be produced economically.