• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.351-367
• /
• 2020

The pigments of three old and new celestial charts folding screens(『Celestial Chart(Folding Screen)』 and 『Old and New Celestial Charts, Eight-Panel Folding Screen』 of National Folk Museum of Korea and 『Koudou-Nanboku-Ryousouseizu』 of National Diet Library of Japan) were analyzed to estimate their dating. It was estimated that the 『Celestial Charts(Folding Screen)』 was painted using traditional pigments from the Joseon dynasty such as azurite, indigo lake, malachite, atacamite, vermilion, iron oxide, cochineal, gamboge, orpiment, lead white, talc and soot. The green and blue colors of the 『Old and New Celestial Charts, Eight-Panel Folding Screen』 and 『Koudou-Nanboku-Ryousouseizu』 were painted using artificial inorganic pigments such as emerald green and ultramarine blue. These pigments were imported from Europe post the mid-19th century. In the 『Old and New Celestial Chart, Eight-Panel Folding Screen』, only artificial inorganic pigments were used for green and blue colors. However in the 『Koudou-Nanboku-Ryousouseizu』, emerald green and atacamite in green color, and ultramarine blue and indigo lake in blue color were used together. Based on both the results of pigment analysis and the study of star charts and inscriptions, the 『Celestial Charts(Folding Screen)』 was painted post mid-18th century. The 『Koudou-Nanboku-Ryousouseizu』 and 『Old and New Celestial Charts, Eight-Panel Folding Screen』 were painted after green and blue artificial pigments were imported in the mid-19th century. The 『Koudou-Nanboku-Ryousouseizu』 in which both traditional and western artificial pigments were used, can be dated earlier than the 『Old and New Celestial Chart, Eight-Panel Folding Screen』.

• Journal of radiological science and technology
• /
• v.16 no.1
• /
• pp.41-55
• /
• 1993

Recently, various screen film system have been introduced in diagnostic radiology. There are two kinds of screen film system : blue emitting $CaWO_4$ screen has been largely used in these days. However, it tends to be changed to use green emitting $Gd_2O_2S$ : Tb screen. In this study, photographic characteristics of $CaWO_4$ and $Gd_2O_2S$ : Tb screen were investigated with luminescence, spectroscopy. The morphology of $CaWO_4$ and $Gd_2O_2S$ : Tb were also observed by using scanning electron microscope. The result obtained were as follows : 1. There was small difference in the thickness of phosphor layers for the front and back screen of blue emitting system, but little difference in those of green emitting system. 2. There was no difference in the size of phosphor particles between the front and back screen for each screen. However, the particle size was different for the various kinds of screens. 3. The shape of phosphor particle was round with many faces for all the screens. 4. In the exposure of X-ray with the same intensity, luminescent intensity of a green emitting system was $6{\sim}7$ times larger than that of a blue emitting system. 5. The thickness of phosphor layers does not affect on the sensitivity of the screens exposed by X-ray.

• International journal of advanced smart convergence
• /
• v.11 no.2
• /
• pp.64-70
• /
• 2022

In recent years, with the continuous innovation and upgrading of engine software, the real-time rendering technology in film and television has been continuously improved, and the virtual production technology has also developed rapidly. This paper introduces the green screen often used in traditional film production and a virtual production technology based on light-emitting-diode background wall that was proposed and implemented last year. We analyzed the two production methods of virtual production and compared their characteristics. Based on these results, we can better understand the differences and respective advantages of the two production methods. And we also can according to the production budget, production cycle and the creative and technical capabilities of the team make better choices during the production process. We believe virtual production technology will be production in the future to provide a more solid technical guarantee for the development of the film industry, and this work will pave the way for further research on virtual production technology.

• Journal of radiological science and technology
• /
• v.13 no.2
• /
• pp.21-25
• /
• 1990

This report is study about difference of H-D curve in regular film and ortho type film, and obtained results as follows : 1. In the blue-color emission intensifying screen, ortho type films and in the green-color emission intensifying screens, regular type are decreased in their gradient. 2. When joint use of regular type film and ortho type film, the gradient difference not seen in blue color screen. 3. The gradient difference seen clearly in G4, KM screens(green color emission intensifying). Especially, in part of high film density, the gradient difference are great. So we have to right use of screen and film because not matched used of theare the sensitivity and gradient are decrease.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.3
• /
• pp.246-251
• /
• 2013

Screen printing is commonly used to form the front/back electrodes in silicon solar cell. But it has caused high resistance and low aspect ratio, resulting in decreased conversion efficiency in solar cell. Recently the plating method has been combined with screen-printed c-Si solar cell to reduce the resistance and improve the aspect ratio. In this paper, we investigated the effect of light induced silver plating with screen-printed c-Si solar cells and compared their electrical properties. All wafers were textured, doped, and coated with anti-reflection layer. The metallization process was carried out with screen-printing, followed by co-fired. Then we performed light induced Ag plating by changing the plating time in the range of 20 sec~5min with/without external light. For comparison, we measured the light I-V characteristics and electrode width by optical microscope. During plating, silver ions fill the porous structure established in rapid silver particle sintering during co-firing step, which results in resistance decrease and efficiency improvement. The plating rate was increased in presence of light lamp, resulting in widening the electrode with and reducing the short-circuit current by shadowing loss. With the optimized plating condition, the conversion efficiency of solar cells was increased by 0.4% due to decreased series resistance. Finally we obtained the short-circuit current of 8.66 A, open-circuit voltage of 0.632 V, fill factor of 78.2%, and efficiency of 17.8% on a silicon solar cell.

• Magazine of RCR
• /
• v.19 no.2
• /
• pp.79-82
• /
• 2024

• Asian Journal of Turfgrass Science
• /
• v.19 no.2
• /
• pp.103-113
• /
• 2005

This study was conducted to improve the green up of zoysiagrass(2. japonica) and cool-season grass($80\%$ Kentucky bluegrass+$20\%$ Perennial ryegrass) during early spring in Korea. Treatments fur zoysiagrass were control, Polyethylene film, Black screen, Black screen+polyethylene film, Green screen+polyethylene film, Polyethylene film+Black screen, Polyethylene film+Green screen, low mowing height(1.5-2cm) and homing. For cool-season grass, non-punched Polyethylene film, punched Polyethylene film treatments were included. Application dates of covering with Polyethylene film were Feb. 22, Feb. 28, March 7, and March 14. Green up was evaluated by visual color rating. The results are as follows; 1. The best method for improving green up of zoysiagrass were Polyethylene film and optimal covering day for zoysiagrass was on Feb. 22. 2. Low mowing height(1.5-2cm) and burning of zoysiagrass showed the faster greening 1$\sim$weeks before than control. .3 Non-punched Polyethylene film covering was best to improve green up of cool-season grass. More time of covering time with cool-season grass induces rapid green up.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.381-385
• /
• 2016

Recently, white LEDs, especially, warm white LEDs have been intensively investigated due to outstanding optical properties, long term stability and low power consumption. In this study, mixed type and patterned type of remote phosphors were prepared by screen printing process employing green and red phosphor. Each type of remote phosphor exhibited distinctive photoluminescence spectrum. For example, the mixed type of remote phosphor exhibited unique spectrum, while the patterned type showed expectable spectrum depending on the concentration of phosphors. This indicates that a small amount of red phosphor dramatically reduced the green photoluminescence in the case of mixed-type remote phosphor, whereas the effect was negligible in the patterned-type remote phosphor. The possibility of undesirable chemical reaction was further investigated by using scanning electron microscopy and X-ray diffraction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.687-687
• /
• 2013

In rearpoint contact solar cell and the PERC (passivated emitter rear contact) type cell, surfaces were passivated by SiO2 or Al2O3 to increase solar cell efficiency. Therefore, we have investigated the effect of surface passivation for crystalline silicon solarcell using mass-production atomic layer deposited (ALD) Al2O3. The patttern which consists of cylinders with 100um diameter and 5um height was formed by PR patterning on Si (100) substrate and then Al2O3 of about 10nm and 20nm thickness was deposited by ALD. The pattern in 10 nm Al2O3 film was removed by dipping in aceton solution for about 10 min but the pattern in 20 nm Al2O3 film was not. The influences of process temperature and heat treatment were investigated using microwave photoconductance decay (PCD) and Quasi-Steady-State photoconductance (QSSPC). The solar cell process used in this work combines the advantage of using the applicability of a selective deposition associated with a ALD passivation and the use of low-cost screen print for the contacts formation.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.1
• /
• pp.11-15
• /
• 2011

In this study, $ZnGa_2O_4$ phosphors in its application to field emission displays and electroluminescence were synthesized through the precipitation method and $Mn^{2+}$ ions. A green luminescence activator, $Cr^{3+}$ ions, and a red luminescence activator were separately doped into $ZnGa_2O_4$, which was then screen printed to an indium tin oxide substrate. The thick films of the $ZnGa_2O_4$ were deposited with the various thicknesses using nano-sized powder. The best luminescence characteristics were shown at a thickness of 60 ${\mu}m$. Additionally, green-emission $ZnGa_2O_4:Mn^{2+}$ and red-emission $ZnGa_2O_4:Cr^{3+}$ phosphor thick films, which have superior characteristics, were manufactured through the screen-printing method. These results indicate that $ZnGa_2O_4$ phosphors prepared through the precipitation method have wide application as phosphor of the full color emission.