• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.951-960
• /
• 2007

Window interface to Hydrological Simulation Program-FORTRAN (WinHSPF) developed by the United States Environmental Protection Agency (EPA) was applied to the upstream of Nam-Han river watershed to examine its applicability for loading estimates in watershed scale and to evaluate non-point source control scenarios using BMPRAC in WinHSPF. The WinHSPF model was calibrated and verified for water flow using Ministry of Construction and Transportation (MOCT, 3 stations, 2003~2005) and water qualities using Ministry of Environment (MOE, 5 station, 2000~2006). Water flow and water quality simulation results were also satisfactory over the total simulation period. But outliers were occurred in the time series data of TN and TP at some regions and periods. Therefore, it required more profit calibration process for more various parameters. As a result, all the study was performed within the expectation considering the complexity of the watershed, pollutant sources and land uses intermixed in the watershed. The estimated pollutant load for annual average about $BOD_5$, T-N and T-P respectively. Nonpoint source loading had a great portion of total pollutant loading, about 86.5~95.2%. In WinHSPF, BMPRAC was applied to evaluate non-point source control scenarios (constructed wetland, wet detention ponds and infiltration basins). All the scenarios showed efficiency of non-point source removal. Overall, the HSPF model is adequate for simulating watersheds characteristics, and its application is recommended for watershed management and evaluation of best management practices.

• Journal of Fashion Business
• /
• v.7 no.4
• /
• pp.78-92
• /
• 2003

The upper-body characteristics of the right-handed and the left-handed are examined and compared through 1-dimensional measurement and 2-dimensional measurement. The results were as follows: 1. According to 1-dimensional measurement results, the clearest differences were seen in girth items rather than height or length items. In particular, hand girth, lower arm girth, and upper arm girth were bigger on the left side in the left-handed group and the right side in the right-handed group. This is thought to be relevant to the arm muscles frequently used. 2. According to 2-dimensional measurement results, significant differences appeared in the females of the left-handed group: shoulder point among width items. In the right-handed group, some differences of significance were shown in females (shoulder point, rear armpit point, and B.P. point among width items) and males (front neck point among extreme vertical distance items). In summary, the body type characteristics of the left-handed and the right-handed reveal great differences in the items related to arm length and arm girth. In other words, the sleeve and shoulder patterns production based on the right-handed don't rightly reflect the somatotype characteristics of the left-handed. In addition, in the cases of athletes, laborers, and the disabled who frequently use particular muscles or parts of the body, this sort of research in the patterns is consistently needed in order to reflect the size differences in girth items in upper body.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1651-1658
• /
• 2010

As indicators of life quality have recently shown great improvement, early stage medical examination and health care patterns are usually preformed before diseases occur. Thus, hand acupuncture, as an alternative medicine to reflect these movements of preventative work and health care, is widely used these days. Therefore, in this paper, we measured the change of voice signals elements associated with heart by stimulating the heart A16 acupuncture point, and then we investigated possible improvements of cardiac function through analysis of cross-comparisons between measurements of cardiac changes. With this in mind, we collected voice samples associated with heart before and after stimulating the corresponding A16 acupuncture point, and we performed an experiment by applying the second formant bandwidth and Jitter. As result, stimulating the A16 acupuncture point results to lowering the second formant bandwidth and Jitter. The result has proven that using voice signal processing technology can help improvement of heart function.

• Journal of Veterinary Science
• /
• v.25 no.2
• /
• pp.28.1-28.11
• /
• 2024

Background: Porcine circovirus type 2 (PCV2) infection is ubiquitous around the world. Diagnosis of the porcine circovirus-associated disease requires clinic-pathological elements together with the quantification of viral loads. Furthermore, given pig farms in regions lacking access to sufficient laboratory equipment, developing diagnostic devices with high accuracy, accessibility, and affordability is a necessity. Objectives: This study aims to investigate two newly developed diagnostic tools that may satisfy these criteria. Methods: We collected 250 specimens, including 170 PCV2-positive and 80 PCV2-negative samples. The standard diagnosis and cycle threshold (Ct) values were determined by quantitative polymerase chain reaction (qPCR). Then, two point-of-care (POC) diagnostic platforms, convective polymerase chain reaction (cPCR, qualitative assay: positive or negative results are shown) and EZtargex (quantitative assay: Ct values are shown), were examined and analyzed. Results: The sensitivity and specificity of cPCR were 88.23% and 100%, respectively; the sensitivity and specificity of EZtargex were 87.65% and 100%, respectively. These assays also showed excellent concordance compared with the qPCR assay (κ = 0.828 for cPCR and κ = 0.820 for EZtargex). The statistical analysis showed a great diagnostic power of the EZtargex assay to discriminate between samples with different levels of positivity. Conclusions: The two point-of-care diagnostic platforms are accurate, rapid, convenient and require little training for PCV2 diagnosis. These POC platforms can discriminate viral loads to predict the clinical status of the animals. The current study provided evidence that these diagnostics were applicable with high sensitivity and specificity in the diagnosis of PCV2 infection in the field.

• Archives of design research
• /
• v.13
• /
• pp.105-113
• /
• 1996

The great development of the modern science enables the information technology including computer to be promoted, which has the great effects on the whole design field. Most of all, the computer has the feature to express the mathmatical formular through the logic and system, which is being used very efficiently in the design work. CG application to the two-dimensional design may be limited in promoting the basic ability synthetically through the direct and molding experience for its attribute, however, it is possible to create the effects on the different level in addition to those from the traditional skill. In particular, we should keep the fact in mind that the CG application in the design field will be able to accomplish the object only under understanding the attributes and functions for it to have. We should carry out the task to agree with. First, it is necessary to develop the various study on the educational environment to make the process to solve the problems and to promote the effects of the educational media in teaching design with the CG application. This study would make plans to approach that the computer can be utilized for the main method to create design despite of being limited in some point. Moreover, it suggests the possibility for the CG application in the course of building up and motiving the models by applied the basic system, which enables the computer to be applied centering around the composition of geometry pattern of the basic course of the two-dimensional design.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.935-938
• /
• 2002

The degree of contamination in outdoor insulation system is one of the most importance factor to determine the level of insulation, and the salt is known as the most dangerous contaminants in the most region of the world. In a macroscopic point of view, as shown through the preceding study, the generation and deposition of salt contaminants has a great relation with the geographical conditions and the meteorological conditions, such as, wind velocity, wind direction, precipitation and so forth. However, in the aspect of microscopic analysis, the pollution mechanism has a great relation with aerodynamic properties of insulator, originated from the profile of insulators, and the non-uniform deposition is unevitable. So, in this investigation, we had make a experiment to seize the electrical properties of non-uniformly contaminated insulator. The results of this investigation could be used as a good groundwork in the determination of outdoor insulation design.

• Journal of Aquaculture
• /
• v.20 no.3
• /
• pp.194-198
• /
• 2007

Reproductive traits of Palaemon gravieri such as embryo size, number of embryo (fecundity), incubation period, larval development mode, larval development period, larval survival and larval growth were described and compared to analyze the correlation among those traits. Embryo volume is a primary factor determining other ensuing reproductive features. Egg volume was $0.042mm^3$ in the first developmental stage. Embryo volume in P. gravieri was comparatively small which is indicative of great number of embryo (y = 3.0161x + 0.0185 $R^2$ = 0.74 positive isometric relationship) and relatively long incubation period. Larvae survived from zoea 1 to post-larvae and it took 45 days at $22^{\circ}C$. Survival rate of the larvae was rather great in the early stage and thereafter steadily decreased. Daily growth rate of larvae in P. gravieri at $22^{\circ}C$ was 0.0195 mm on average. They grew steadily as time went by. Incubation period was between 10-14 days at $22^{\circ}C$. Larval development mode was almost complete planktotrophic. PNR (point of no return) appeared to be the third day on average. Survival rate of larvae without feeding declined rapidly between 3 and 4 days. Larval development period and stage frequency were 23-30 days and 11 stages which imply prolonged larval period and high mortality. The pattern of brood production followed fast successive parturial pattern. Most ovigerous female had mature ovary when they performed parturial molt soon after hatching (larval release).

• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4347-4351
• /
• 2011

The nucleophilic substitution reactions of ethylene phosphorochloridate (2) with X-pyridines are investigated kinetically in acetonitrile at $-20.0^{\circ}C$. The free energy correlations for substituent X variations in the nucleophiles exhibit biphasic concave upwards with a break point at X = 3-Ph. Unusual positive ${\rho}_X$ (= +2.49) and negative ${\beta}_X$ (= -0.41) values are obtained with the weakly basic pyridines, and rationalized by the isokinetic relationship with isokinetic temperature at $t_{ISOKINETIC}=6.6^{\circ}C$. The pyridinolysis rate of 2 with a cyclic five-membered ring is forty thousand times faster than its acyclic counterpart (3: diethyl chlorophosphate) because of great positive value of the entropy of activation of 2 (${\Delta}S^{\neq}$ = +49.2 eu) compared to negative value of 3 (${\Delta}S^{\neq}$ = -44.1 eu) over considerably unfavorable enthalpy of activation of 2 (${\Delta}H^{\neq}=28.4\;kcal\;mol^{-1}$) compared to 3 (${\Delta}H^{\neq}=6.3\;kcal\;mol^{-1}$). Great enthalpy and positive entropy of activation are ascribed to sterically congested transition state (TS) and solvent structure breaking in the TS. A concerted mechanism involving a change of nucleophilic attacking direction from a frontside attack with the strongly basic pyridines to a backside attack with the weakly basic pyridines is proposed.

• Tribology and Lubricants
• /
• v.24 no.6
• /
• pp.378-385
• /
• 2008

In foil bearings, the friction between bumps and their mating surfaces is the major factor which exerts great influence on the bearing performance. From this point of view, many efforts have been made to improve the understanding of the influence of the friction on the foil bearing performance by developing a number of analytical models. However, most of them did not consider the hysteretic behavior of the foil structure resulting from the friction. The present work developed the static structural model in which hysteretic behavior of the friction was considered. The foil structure was modeled using finite element method and the algorithm which determines the conditions of the contact nodes and the directions of the friction forces was used to take into account the friction. The developed model was integrated into the foil bearing prediction code to investigate the effects of the friction on the static performance of the bearing. The results of analysis show that multiple static equilibrium positions are presented for the one static load under the influence of the friction, inferring its great effects on the dynamic performance. However, the effect of friction on the minimum film thickness which determines load capacity of the bearing is negligible.

• Journal of Korean Association for Spatial Structures
• /
• v.1 no.1 s.1
• /
• pp.117-124
• /
• 2001

In Single-layer latticed domes with rectangular network which is composed of ring of circumferential direction and rafter of longitudinal direction, that is, rib domes, if we use the cross-membered junction's method for the advantage in fabrication and construction, the eccentricity is occurred in the nodal point of crossing members. This paper is aimed at investigating the buckling characteristics for the effect of eccentricity according to rise-span ratios and distance of eccentricity. Analysis method is based on FEM dealing with the geometrically nonlinear deflection problems. The conclusion were given as follows: 1. The maximum decreasing ratio of buckling strength due to the junction's eccentricity is about 60% in models of this paper. 2. In the increasing ratio of buckling strength for rise-span ratio, that of Type 3 models is larger than that of type 2 models. On the other hand, that of Type 2 mode is larger than that of Type 3 for eccentricity-distance. 3. In the viewpoint of the value of buckling strength, that of Type 2 models is larger than that of type 3 models. The effect of the junction's rigidity on buckling strength is not great for overall models. Therefore if we use the cross-membered junction's method for the advantage in fabrication and construction, the method of Type 2 will have the great advantage of that of Type 3.