• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.353-354
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.209-210
• /
• 2009

• Journal of the Korean Graphic Arts Communication Society
• /
• v.31 no.1
• /
• pp.65-78
• /
• 2013

In gravure printing ink in printed flexible packaging considering the characteristics of the study more accurate color management options and results were as follows. When applying G7 calibration, P2P of the target GRACol G7 evaluate the delta $L^*$ and delta $F^*$, CMY and K-scale average of the results of delta $L^*$ and the highest tolerance G7 average of 1.5 and 3.0 are included in all the best. In addition, the average delta $F^*$ and super delta $F^*$, G7 tolerance by being included within the scope of color management, G7 calibration was possible. Target IT 8.7/4 CMYK, when applied to the calibration G7, Color gravure printing machine is applied to the average of the previous decreased from 12.4 to 3.6. In addition, if a digital proof is EPSON WT 7900 the average color applied to the previous reduction from 5.24 to 0.74 because of the gravure printing color proofing system was effective in the management. G7 calibration by applying the reference print profile of the Epson WT 7900-G-icc, the average was 0.74 coloration, and gravure-G-icc cases, the average color of the 3.60 per GRACol average of all the five colors below were included within the allowable range. Thus, the flexible packaging gravure printing color management of printed after applying the first G7 calibration, the results refer to the press by the profiling, and where best to take advantage of the profile creation was good.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.2
• /
• pp.45-58
• /
• 2011

Gravure off-set printing recently is used in electronics display market. This method has advantages of mass production and high printing speed. It is also fine pattern can be implemented. We have manufactured low-curable conductive Ag pastes for gravure off-set printing. When printing, the pastes be used different silver powder shape because of the printing characteristics. The pastes were prepared with silver powder by silver powder shape and size, epoxy resin, solvent and homogenized on a standard three-roll mill. And the pastes exhibited a shear-thinning flow at viscosity profile. Moreover the adhesive strength and resistivity of silver film had a good characteristics. With the manufactured paste in this study, touch panel had is manufactured and it had $4{\times}10-5{\Omega}.cm$.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.10 no.1
• /
• pp.81-90
• /
• 1992

The charater of standing box printing reguires a rich representation in a light and a shade of color and caues the modern photographs to be abundant of the ink and also shows the continuity of which any other printing is incapable because of its profound gradation. The clear printing in gravure can be said to be due to the good transfer of the ink - the completion of the transference of the ink into the stencil paper and the clear transference of the printing tone. The most inportant matter is the distance between the printing press and the doctor line. It is the matter of the structure and arrangement because of giving the most affect on the dryness of the ink in the cell. The glue of the ink in gravure changes by the kinds of the dye and the cellusolve used. To make the printing somoothly progressive from the high glue of the ink to the low glue of the ink will have to be used, which will be possible to choose the ester.ose the ester.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.583-584
• /
• 2006

Printing technology has begun to get into the spotlight in many ways due to the low cost effectiveness to existent semi-conductor process. It also has very useful application areas, not only paper printing but also patterning for LCD color tilter, Photovoltaic patterning, RFID antenna, OLED, and so on. In this study, an apparatus of gravure offset printing was developed for fine line width printing. The pattern was composed of $20{\mu}m$ size of continuous lines of which pitch size was $40{\mu}m$. The printed pattern shows that it is possible to make around $20{\mu}m$ line-width printing pattern. The roll-to-roll printing system for fine line-width printing based on primary experiment is presented. For testing of multi-layer printing, the system was designed to be capable of printing two different materials from each printing unit using gravure-offset printing method and have a function of alignment of two printed materials.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.645-646
• /
• 2007

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.6
• /
• pp.573-577
• /
• 2013

The one of the most important issue in roll-to-roll gravure printing is increase of ink transfer ratio or printability. As the result of high ink transfer ratio or printability, we can assess the quality of the printed patterns. The rheological properties are the important factors for the printability of electrodes patterning. In this study, the rheological properties of conductive ink are controlled by adding the solvent. The inks with different rheological properties are used for the patterning of the electrodes of $100{\mu}m$ by gravure printing equipment. The various printing speed, which also affect the rheological properties of conductive ink, is applied and the printed patterns are compared for their width and aspect ratio. Decreasing in the ink viscosity as well as increasing in the printing speed decreases the printability in gravure patterning, which shows that the rheological properties are important factors for the printability of gravure patterning.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.53-64
• /
• 2007

Gravure printing is the most useful printing process than any other engraving printing method. According to the cell which is variable size and depth, ink is transferred substrates. So, the amount of ink from cells has a great effect on the qualities of final printed products. The variables effect on the printability of final products are proportion of the width and length, the rhelogical properties, roll speed etc. However the mechanism of gravure is difficult to study scientifically because of high speed and excessively small size of the cell. To approach the mechanism we experimented the real test by using gravure printability. The condition of variables of IGT is pressure and velocity. By using Polyflow 3. 10. 0 simulation software, we built up the theoretical model under the constant variables. Then, we compared the real test with the simulation results. Therefore, it is studied the mechanism of gravure scientifically and it can be analysed the effect of the variable conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1638-1641
• /
• 2008

We have investigated the effectiveness of a gravure printing method for the fabrication of organic light-emitting diode (OLED) and Organic Thin Film Transistor (OTFT). Printing of the organic layers was performed with a small-scale gravure coating machine, while the metallic layers were vacuum-evaporated. Devices with gravure-printed layers are at least comparable with the spin-coated devices. Effects of the solvent formulation and surface energy mismatch between the organic layer materials on the printed patterns and device performance were discussed. We will present the initial design and experimental data of OTFT fabricated by roll-type soft contact transfer process.