• 한국광학회지
• /
• 제10권5호
• /
• pp.391-395
• /
• 1999

4% 물의 MgO가 도핑된 광굴절 $LiNbO_3$ 결정에 기록된 광굴절 격자의 회절 효율과 응답시간을 측정하였다. 이 실험에는 고출력 펄스 Nd:YAG 레이저(Q-switch mode,$\lambda$=532nm)와 연속 발진 아르곤 이온 레이저($\lambda$=514.5nm)가 사용되었다. 두 종류의 레이저 광속에 대한 실험에서 광학계의 배열을 동일하게 하고 2광파 혼합 조건에서 레이저 광속의 세기를 1.6~100W/$\textrm{cm}^2$까지 변화시켜가며 최대 회절 효율과 기록 및 소거시의 응답시간을 측정하였다. 두 실험에서 얻은 결과를 비교하고 분석 하였다.

• Journal of the Optical Society of Korea
• /
• 제15권3호
• /
• pp.216-221
• /
• 2011

A diffraction grating is a highly symmetric optical element with a physical structure that is invariant under translational spatial movements. The translational symmetry is reflected in the fields that are diffracted from the grating. Here, we introduce a plane-parallel mirror pair onto the grating, which translates the fields through double reflections, and we describe a method of exploiting the symmetry to enhance the spectral resolution of a diffraction grating beyond the limit that is set by the number of grooves. The mirror pair creates another virtual grating beside the original one, effectively doubling the number of grooves. Addition of more mirror pairs can further increase the effective number of grooves despite the increased complexity and difficulty of experimental implementation. We experimentally demonstrate the spectral linewidth reduction by a factor of four in a neon fluorescence spectrum. Even though the geometrical restriction on the mirror deployment limits our method to a certain range of the whole spectrum, as a practical application example, a bulky spectrometer that is nearly empty inside can be made compact without sacrificing the resolution.

• The Journal of the Acoustical Society of Korea
• /
• 제15권4E호
• /
• pp.14-20
• /
• 1996

The double mode SAW resonator filters have the serious shortcoming that out-of-band rejection above the passband is quite poor. Hence a new structure of the double mode filter is designed with the COM (Coupling Of MOdes) theory with better out-of-band rejection characteristics while keeping all the beauties of the conventional type. The second goal of the design is to reduce the planar size of the structure so that mass productivity of low frequency devices can be improved. For those purposes, several IDT's and relfector gratings are added to or subtracted from the conventional structure so that the modification can lead to better overall performance as a filter. As results of the investigation, several new double mode SAW resonator filter structures are developed. A new structure shows 10dB more out-of-band rejection that the conventional type with 25% reduced device size. Good agreement is demonstrated between the analytical results and experimental results for an illustrative 325MHz four pole resonator filter on 64°YX LiNbO3.

• 전자공학회논문지D
• /
• 제34D권5호
• /
• pp.1-6
• /
• 1997

An analysis method for the electromagnetic scattering of a tE polarized plane wave from a periodic strip grating over a grounded dielectric slab is consisered from the viewpoint of reflectio ngraing problem. The strip gratings showing bragg and off-bragg balzing phenomena at the frequency of 10GHz are designed, respectively. The strip grating structure is implemented using aluminum plate (hround conductor), paraffin(dielectric material ; .xi.$_{\gamma}$=2.24) and copper (strip conductor ; 0.08mm thickness). The experimental results (reflection power) for bragg as well as off-bragg blazing phenomenon have been compared with the theoretical results and fairly good agreements between theory and experiment have been observed.ed.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권9호
• /
• pp.423-428
• /
• 2006

We have been carried out the two-beam interference method to form the diffraction grating on chalcogenide $AS_{40}Se_{15}S_{35}Ge_{10}$ thin films for Holography Data Storage (HDS). In the present work, we have been formed holographic diffraction gratings using He-Ne laser (632.8nm) under different Polarization state combinations (intensity polarization holography, phase polarization holography). It was obtained the diffraction grating efficiency by 11st order intensity and investigated the formed grating structure using Atomic Force Microscopy (AFM). As the results, it is shown that the diffraction efficiency of (P: P) polarized recording was maximum 2.4% and we found that its value was rather higher than that of other-polarized recordings. From the results, it is confirmed that the efficient holographic grating formation on amorphous chalcogenide $AS_{40}Se_{15}S_{35}Ge_{10}$ films depend on both the spatial variation of intensity and the polarization state of the incident field pattern.

• 전기전자학회논문지
• /
• 제12권1호
• /
• pp.43-50
• /
• 2008

본 논문에서는 광섬유 브래그 격자 필터와 MZI로 구성된 전광 다중화기의 온도 특성에 대해 연구하였다. 전광 다중화기의 온도 특성을 분석하기 위해서, 전광 다중화기의 온도 변화에 대한 특성을 수치 해석하였으며, 실험을 통하여 출력 스펙트럼을 측정하였다. 그 결과로부터 $-30^{\circ}C{\sim}90^{\circ}C$ 범위 내에서 전광 다중화기의 출력 스펙트럼의 중심 파장은 약 0.01230 nm/$^{\circ}C$로 변화함을 알 수 있었다.

• ETRI Journal
• /
• 제39권3호
• /
• pp.390-397
• /
• 2017

In this paper, we propose a scheme for designing a tunable pixel layer based on a $Ge_2Sb_2Te_5$ (GST) alloy thin film. We show that the phase change of GST can significantly affect the reflection characteristic when the GST film is embedded into a dielectric encapsulation layer. We investigate the appropriate positions of the GST film within the dielectric layer for high diffraction efficiency, and we prove that they are antinodes of Fabry-Perot resonance inside the dielectric layer. Using the proposed scheme, we can increase the diffraction efficiency by about ten times compared to a bare GST film pixel, and 80 times for the first-to-zeroth-order diffraction power ratio. We show that the proposed scheme can be designed alternatively for a broadband or wavelength-selective type by tuning the dielectric thickness, and we discuss a multi-phase example with a double-stack structure.

• Steel and Composite Structures
• /
• 제9권6호
• /
• pp.569-584
• /
• 2009

Corrosion of steel rebars in bridge decks which are faced to harsh conditions, is a common problem in construction industries due to the porosity of concrete. In this research, the behavior of one-way concrete slabs reinforced with Glass fiber reinforced polymer (GFRP) molded grating is investigated both theoretically and experimentally. In the analytical method, a closed-form solution for load-deflection behavior of a slab under four-point bending condition is developed by considering a concrete slab as an orthotropic plate and defining stiffness coefficients in principal directions. The available formulation for concrete reinforced with steel is expanded for concrete reinforced with GFRP molded grating to predict ultimate failure load. In finite element modeling, an exact nonlinear behavior of concrete along with a 3-D failure criterion for cracking and crushing are considered in order to estimate the ultimate failure load and the initial cracking load. Eight concrete slabs reinforced with steel and GFRP grating in various thicknesses are also tested to verify the results. The obtained results from the models and experiments are relatively satisfactory.

• 한국인터넷방송통신학회논문지
• /
• 제20권2호
• /
• pp.195-200
• /
• 2020

고유치 문제에 기초한 모드 전송선로 이론 (Modal Transmission-Line Theory: MTLT)을 이용하여 blazed 격자로 구성된 광 도파로의 누설특성과 Bragg 조건들을 정확하게 분석하였다. 대칭형, 톱니형, 비대칭형으로 분류한 blazed 격자형 광 도파로는 Bragg 조건들에서 leaky-wave stop-band가 나타났으며, Bragg 조건 근처에서 Rayleigh 조건에 기인한 anomalies 현상이 발생함을 보였다. 또한, 주기적인 격자구조의 특성 임피던스에 기초한 종 방향 등가 전송선로를 구성하여 광 도파로의 DFB 특성을 Bragg 조건에서 분석하였다. 분석 결과, leaky-wave stop-band가 발생하는 Bragg 조건에서 DFB 도파로의 반사전력이 최대가 되는 것을 확인하였다.

• 대한전자공학회논문지SD
• /
• 제40권4호
• /
• pp.27-33
• /
• 2003

최근, 원통형 DFB전송 구조들은 다양한 광 소자들과 결합하여 광통신용 필터로 널리 사용되고 있다. 이 원통형 Bragg 격자 구조들의 광 필터특성을 분석하기 위하여 본 논문에서는 Floquet-Babinet의 원리에 의존한 새롭고 쉬운 모드 전송선로 이론 (Modal Transmission-Line Theory)을 제시하였다. 수치해석 결과, 제안한 해석법은 원통형 DFB전송 구조들의 필터특성을 분석하기 위한 유용한 프로그래밍 알고리즘을 제공하고, 다층 원통형 주기 구조들의 전송특성을 분석하기 위하여 쉽게 발전시킬 수 있음을 보였다.