• 제목/요약/키워드: Graphite particles

검색결과 144건 처리시간 0.025초

피도금 탄소재의 산처리가 무전해 동도금에 미치는 영향 (Effects of Acid Treatment of Carbon on Electroless Copper Plating)

  • 신아리;한준현
    • 한국표면공학회지
    • /
    • 제49권3호
    • /
    • pp.265-273
    • /
    • 2016
  • The effects of surface modification by nitric acid on the pre-treatment of electroless copper plating were investigated. Copper was electroless-plated on the nitric acid treated graphite activated by a two-step pre-treatment process (sensitization + activation). The chemical state and relative quantities of the various surface species were determined by X-ray photoelectron spectroscopy (XPS) after nitric acid modification or pre-treatment. The acid treatment increased the surface roughness of the graphite due to deep and fine pores and introduced the oxygen-containing functional groups (-COOH and O-C=O) on the surface of graphite. In the pre-treatment step, the high roughness and many functional groups on the nitric acid treated graphite promoted the adsorption of Sn and Pd ions, leading to the uniform adsorption of catalyst ($Pd^0$) for Cu deposition. In the early stage of electroless plating, a lot of tiny copper particles were formed on the whole surface of acid treated graphite and then homogeneous copper film with low variation in thickness was formed after 30 min.

활성탄소에 담지된 백금나노입자의 전기화학적 거동에 대한 그라파이트 나노섬유 첨가효과 (Effect of Graphite Nanofibers Addition on the Electrochemical Behaviors of Platinum Nanoparticles Deposited on Activated Carbons)

  • 조원빈;오미순;김주현;김석
    • Korean Chemical Engineering Research
    • /
    • 제48권6호
    • /
    • pp.673-678
    • /
    • 2010
  • 본 연구에서는 탄소지지체로 활성탄소를 주요재료로 사용하고 여기에 그라파이트 나노섬유(graphite nanofibers)를 함량별로 혼합시킨 후, 백금전구체를 포함하는 용액에 분산시키고, 화학적인 환원반응을 통해서 백금입자를 담지하여 제조하였다. 첨가하는 GNF의 함량을 조절하면서, 백금입자의 결정 크기와 담지함량을 제어할 수 있었다. GNF 함량이 15 wt%인 혼합지지체를 사용한 백금입자의 경우, 최대의 전기활성 특성을 나타내었다. 또한, GNF 함량을 0%에서 15%로 증가시킴에 따라 전기전도도가 $10^{-4}S/cm$에서 $10^{-1}S/cm$로 증가하였다. 첨가제 GNF를 10%까지 도입한 경우, 백금입자의 전기활성은 크게 증가하는 경향을 보이지만, 15%에서는 그 증가경향이 작아져서 포화되는 현상이 보였다. 이런 결과는 전기활성도의 변화가 혼합지지체의 전기전도도 변화와 백금이 담지된 함량, 그리고, 담지형태와 관련성이 있음을 알 수 있었다.

유리섬유 강화 청동기지 복합재에서 마모특성에 미치는 유리섬유와 흑연의 영향 (Effect of Glass Fiber and Graphite on Wear Properties in Tin-Bronze Matrix Composites)

  • 황순홍;김종국;허무영
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 1995년도 추계학술대회논문집
    • /
    • pp.181-187
    • /
    • 1995
  • The effet of glass fiber and graphite on the wear properies in tin-bronze alloy matrix composites was studied by a pin-on-disk type wear testing machine. The results obtained from the wear test were analized by SEM observations of worn surfaces of pins and disks and EPMA composition measurments. The amount of wear was devreased as increasing the content of glass fiber in matrix, since the alloy matrix was reinforced by glass fibers. The wear mechanism of the matrix specimen without glass fibers was proved as the contact area delamination. Oxide layer formed on sliding surface led to the increasing wear resistance. Specimens containing graphite particles showed an lubrication effect to counter disks.

  • PDF

황사입자에 의한 미세탄소 입자의 응집 및 흡착 현상 (Agglomeration and Adsorption of Fine Carbonaceous Particles onto Asian Dust Particles.)

  • 김경원;김영준
    • 한국대기환경학회:학술대회논문집
    • /
    • 한국대기환경학회 2002년도 추계학술대회 논문집
    • /
    • pp.341-342
    • /
    • 2002
  • 미세탄소입자는 원소탄소(elemental carbon)와 유기탄소(organic carbon)로 분류할 수 있다. 원소탄소는 불완전연소 과정에 발생하는 검댕(black soot), 원유의 정제과정에 발생하는 흑연(graphite), 자연상태에서 만들어진 다이아몬드의 3가지 형태로 존재한다. 이들 중 대기환경에 영향을 미치는 요소는 검댕입자로서 입경은 l$\mu\textrm{m}$이하이며, 일정한 형태를 지니고 있지 않다. (중략)

  • PDF

표면개질에 의한 인상흑연 분체의 분산특성 연구 (Dispersion Characteristics of Natural Crystalline Graphite Powders by Surface Modification)

  • 김병곤;최상근;정헌생;한상근;이재장
    • 한국재료학회지
    • /
    • 제11권8호
    • /
    • pp.679-684
    • /
    • 2001
  • 천연흑연은 단위구조가 탄소육각망평면이 평행하게 배열된 층상으로 전기전도도 및 윤활성이 우수하나 소수성이 매우 강하며, 표면화학적 목성이 거의 없기 때문에 다른 물질과 흡착이 쉽게 일어나지 않아 분산이 매우 어려운 물질이다. 따라서 본 연구에서는 제타전위를 이용하여 흑연에 ABDM을 흡착시켜 표면특성을 소수성에서 친수성으로 변화시키고 수중현탁액 중에서 흑연입자의 분산 메커니즘을 DLVO이론을 이용하여 설명하였다. 흑연의 제타전위가 22.5mV가 되도록 ABDM의 흡착량 (20mg/g) 및 조건 (PH 10에서 12시간 흡착)을 만족시키면 분산안정성 (T$_{1/2}$) 이 44.5시간인 고분산성 흑연 현탁액을 제조할 수 있다.

  • PDF

Phenylethynyl-terminated polyimide, exfoliated graphite nanoplatelets, and the composites: an overview

  • Cho, Donghwan;Drzal, Lawrence T.
    • Carbon letters
    • /
    • 제19권
    • /
    • pp.1-11
    • /
    • 2016
  • In efforts to characterize and understand the properties and processing of phenylethynyl-terminated imide (LaRC PETI-5, simply referred to as PETI-5) oligomers and polymers as a high-temperature sizing material for carbon fiber-reinforced polymer matrix composites, PETI-5 imidization and thermal curing behaviors have been extensively investigated based on the phenylethynyl end-group reaction. These studies are reviewed here. In addition, the use of PETI-5 to enhance interfacial adhesion between carbon fibers and a bismaleimide (BMI) matrix, as well as the dynamic mechanical properties of carbon/BMI composites, are discussed. Reports on the thermal expansion behavior of intercalated graphite flake, and the effects of exfoliated graphite nanoplatelets (xGnP) on the properties of PETI-5 matrix composites are also reviewed. The dynamic mechanical and thermal properties and the electrical resistivity of xGnP/PETI-5 composites are characterized. The effect of liquid rubber amine-terminated poly(butadiene-co-acrylonitrile) (ATBN)-coated xGnP particles incorporated into epoxy resin on the toughness of xGnP/epoxy composites is examined in terms of its impact on Izod strength. This paper provides an extensive overview from fundamental studies on PETI-5 and xGnP, as well as applied studies on relevant composite materials.

고탄소강의 흑연화에 미치는 Ni첨가의 영향 (Effects of Ni additions on Graphitization in High carbon steel)

  • 박영구;우기도;진영철;류재화;박종현
    • 열처리공학회지
    • /
    • 제12권1호
    • /
    • pp.55-65
    • /
    • 1999
  • Graphitization of cementite in high carbon steels at subcritical temperature is reported. We have studied about the effects of Ni in these steels on graphitization. The chemical compositions of the specimens were Fe-(0.54, 0.7)%-C-1.0%Si-0.1%Mn-(0.2~1.0)%Ni. After annealing at $650^{\circ}C$, $680^{\circ}C$ and $700^{\circ}C$ during various time the microstructures and hardness change were observed. In order to recover the initial hardness of high carbon steel, dissolution treatment of graphite was performed at $870^{\circ}C$. In case of 0.7%C steel, graphitization was accelerated rather 1.0%Ni addition steel than 0.2% and 0.54%Ni addition steels but the graphite is coarser. In case of 0.54%C-0.2%Ni steel, graphite particles were distributed relatively homogeniously and finely. Nickel addition promotes graphitization of these steels but makes graphite blocky.

  • PDF

Comparison of the effects of irradiation on iso-molded, fine grain nuclear graphites: ETU-10, IG-110 and NBG-25

  • Chi, Se-Hwan
    • Nuclear Engineering and Technology
    • /
    • 제54권7호
    • /
    • pp.2359-2366
    • /
    • 2022
  • Selecting graphite grades with superior irradiation characteristics is important task for designers of graphite moderation reactors. To provide reference information and data for graphite selection, the effects of irradiation on three fine-grained, iso-molded nuclear grade graphites, ETU-10, IG-110, and NBG-25, were compared based on irradiation-induced changes in volume, thermal conductivity, dynamic Young's modulus, and coefficient of thermal expansion. Data employed in this study were obtained from reported irradiation test results in the high flux isotope reactor (HFIR)(ORNL) (ETU-10, IG-110) and high flux reactor (HFR)(NRL) (IG-110, NBG-25). Comparisons were made based on the irradiation dose and irradiation temperature. Overall, the three grades showed similar irradiation-induced property change behaviors, which followed the historic data. More or less grade-sensitive behaviors were observed for the changes in volume and thermal conductivity, and, in contrast, grade-insensitive behaviors were observed for dynamic Young's modulus and coefficient of thermal expansion changes. The ETU-10 of the smallest grain size appeared to show a relatively smaller VC to IG-110 and NBG-25. Drastic decrease in the difference in thermal conductivity was observed for ETU-10 and IG-110 after irradiation. The similar irradiation-induced properties changing behaviors observed in this study especially in the DYM and CTE may be attributed to the assumed similar microstructures that evolved from the similar size coke particles and the same forming method.

Field-Aided Micro-Tailoring에 의한 기능성 나노복합재 제조 (Manufacturing Functional Nano-Composites by Using Field-Aided Micro-Tailoring Manipulation)

  • 조희근;이주훈;심은섭
    • Composites Research
    • /
    • 제25권6호
    • /
    • pp.178-185
    • /
    • 2012
  • 본 연구에서는 기능성 나노복합재를 제작하는 방법이 제시되었다. 미소 입자들을 포함하고 있는 점성을 가진 유체에 전기장을 가하여 유체속에 포함된 입자들을 전기장의 방향에 따라 규칙적으로 배열을 하였다. FAiMTa 기술이라고 불리는 이 방법은 마이크로 혹은 나노 사이즈의 입자들을 체인의 형태로 배열하여 직교이방성 폴리머 나노복합재의 제작을 가능하게 하였다. 알루미나($Al_2O_3$), 탄소나노튜브(CNT), 탄소(Graphite), 텅스텐(W) 등의 마이크로 혹은 나노 사이즈 입자 분말을 사용하여 FAiMTa기술의 유효성을 확인하는 시험을 수행하였다. 이러한 입자들을 전기장을 사용하여 일정한 방향으로 배열하여 직교이방성 폴리머 복합재를 만들었고, 시험시편의 물리적 특성 즉 기계적 열적 특성을 측정하여 방향성을 확인하였다. 이렇게 제작된 첨단 나노복합재는 각종 산업분야에서 큰 효과가 기대된다.

그라파이트 나노윤활유의 열화 후 윤활 특성 비교 연구 (Comparative Study to the Tribological Characteristics of Graphite Nano Lubricants after Thermal Degradation)

  • 이재근;이창건;황유진;최영민;박민찬;최철;오제명
    • Tribology and Lubricants
    • /
    • 제24권4호
    • /
    • pp.190-195
    • /
    • 2008
  • Many researchers have tried to improve the tribological characteristics of lubricant by adding various nano particles in the base lubricant. But the reliability evaluation of the lubricants are rarely performed in its real operation condition. In this study, the physical property and the tribological characteristics of the graphite nano lubricant were evaluated and compared with raw lubricant after thermal degrading. In order to evaluate the tirbological characteristics, the disk-on-disk tribotester was adopted to measure the friction coefficient of the graphite nano lubricants. Also the temperature variations of friction surfaces were measured by the thermocouple installed on the fixed plate in the test chamber of the tribotester. The kinematic viscosity was measured using a capillary viscometer on the temperatures of 40, 60 and $80^{\circ}C$. The results showed that the graphite nano lubricant had lower friction coefficient and less wear on the friction surfaces than raw lubricant. After thermally degrading, the friction coefficients of graphite nano lubricant increased, but the friction coefficients after thermal degradation were still maintained lower than those of raw lubricant.