• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.13-27
• /
• 1994

Litho printing ink vehicles based on rosin modified phenolic are faster drying, have better durability, are harder and glosser and have greater resistance to water than ones based on ester gums. Ink-Water balance and rheological properties are important in litho printing process. These physical properties is concerned with molecular weight of Resin to use vehicle. So this paper was studied about the effects of changing molecular weight of Rosin modified phenolic on surface tension, viscosity, pseudoplasticity and printablility of Litho Inks. The results were as follows. 1) The surface tension of model inks depended on the molecular weight of the resin : Dispersion componnent of ink increase but non dispersion component decrease as molecular weight of Resin increase. 2) Water pick-up of litho ink is more fast balance, using low molecular weight of Resin. 3) Viscosity, Yield value and Newtonian value of model inks increase as molecular weight of Resin increase. 4) The litho ink prepared with the modified phenolic of which molecular weight is about 20000 showed the highest printing density and gloss.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.145-157
• /
• 1994

Litho printing ink vehicles based on rosin modified phenolic are faster drying, have better durability, are harder and glosser and have greater resistance to water than ones based on ester gums. Ink-Water balance and rheological properties are important in litho printing process. These physical properties is concerned with molecular weight of Resin to use vehicle. So this paper was studied about the effects of changing molecular weight of Rosin modified phenolic on surface tension, viscosity, pseudoplasticity and printability of Litho Inks. The results were as follows. 1) The surface tension of model inks depended on the molecular \veight of the resin : Dispersion componnent of ink increase but non dispersion component decrease as molecular weight of Resin increase. 2) Water pick-up of litho ink is more fast balance, using low molecular weight of Resin. 3) Viscosity, Yield value and Newtonian value of model inks increase as molecular weight of Resin increase. 4) The litho ink prepared with the modified phenolic of which molecular weight is about 20000 showed the highest printing density and gloss.

• 한국인쇄학회지
• /
• 제22권2호
• /
• pp.83-100
• /
• 2004

In this paper, the quantity of dot gain in off-set printing is estimated by using the method of UCR(under color removal) and GCR(gray component replacement) and the degree of dot gain is researched through measurement of dot coverage of each color patch at the output film that is variously applied to discretionary quantity of dot gain each line in screen in the printing for the process of color separation and at the offset printing. Also, the best appropriate quantity of dot gain treatment is examined by printing each line in screen for reproduction of colors.

• 한국인쇄학회지
• /
• 제29권3호
• /
• pp.55-63
• /
• 2011

The convex printing plate in particular securities is classified three physical properties. The main ingredient(component)of photosensitive plastic is composed of thermosetting polyamide. After being hardened specimen at $80^{\circ}C$ is shown to resist highly, the Glass Transition Temperatures of photosensitive plastic are $85^{\circ}C$. When hardened plate has reached at $80^{\circ}C$, abrasion loss is minimized. the cause is considered it is more effective in hardening when the temperature of photosensitive plastic is $80^{\circ}C$-the vitrification temperature of those. The hardness and the durability of the convex printing plate in particular securities are affected to the hardening treatment temperature. And the resolution of original drawing has being better when the durability is superior.

• 대한원격탐사학회지
• /
• 제24권3호
• /
• pp.245-250
• /
• 2008

According to public and industrial interests on mobile graphics, a preliminary implementation regarding 3D feature visualization system on cell phone was performed using M3G API, one of the de-facto standards for mobile 3D graphic API. Through this experiment, it is revealed that scene graph structure and 3D mobile file format supported from this API is useful one for 3D geo-modeling and rendering in mobile environment. It is necessary that 3D mobile graphic standards can be considered as one component of current mobile GIS services standards to provide value-added 3D GIS contents.

• 한국컴퓨터산업학회논문지
• /
• 제7권5호
• /
• pp.495-502
• /
• 2006

리포팅 시스템은 사용자가 원하는 정보를 정형화된 형식으로 출력할 수 있는 시스템이다. 클라이언트/서버 환경에서는 원격의 사용자는 클라이언트에서 동작하는 컴포넌트를 이용하여 서버의 데이터를 가공, 처리하여 원하는 형식의 문서 양식으로 출력을 할 수 있었으나, 웹 기반의 인트라넷 구축이 보편화되면서 이와 같은 클라이언트/서버 시스템 구조의 리포팅 시스템이 웹 기반의 환경으로 전환되고 있다. 본 연구는 이와 같은 웹 기반의 시스템 환경에서 사용자가 브라우저를 통해 서버에 접속하고, 서버의 데이터베이스를 검색, 처리한 결과를 원하는 형식으로 파일 저장 또는 인쇄 출력할 수 있도록 지원하는 기능이다. 본 연구 결과는 텍스트 및 그래픽 기능을 지원하며, 실시간 데이터 연동 기능이 가지는 컴포넌트를 개발하였으며, 특히, 서버 시스템에 독립적으로 동작하도록 자바를 이용한 표준 인터페이스로 구현하였다. 특히, 망 관리 시스템의 리포팅 컴포넌트로 구현, 적용함으로써 사용자 인터페이스 및 기능을 검증하였다.

• 대한인간공학회지
• /
• 제10권2호
• /
• pp.31-42
• /
• 1991

To understand the shape of the neck in a view of garment planning, principal component analysis has been appliedto the measurement of the neck. The neck surface development and the cross sections of the neck have been observed. The materials consist of the body mearsurements, the neck surface developments and the cross sec- tions of the necks of a total of 108 korean woman students. The difference between the right side and the left side of the neck has not been reconginiged. But the differenece among the height of the front neck point, that of the side neck point and that of the back neck point has been recognized. 2. The initial 41 items have been found having variety and duplication. So two criteria have been made to solve those problems and the selection of 34 items have been made by each criterion. 3. 43 and 34 items have been compared by means of accumulative ratios of contribution and of clearness within the meaning of principal component. As a result, 34 measurement items have been further anylysis. 4. As a result of principal component analysis on the 34 items, the four principal components have been found obtaines and inter-preted. The four principal components are 1) the thick of the neck, 2) the front neck-line on the waist basic pattern, basic pattern, 3) the shape of the neck surface development, and 4) the back neck-line on the waist basic pattern. 5. According to the graphic informations concerning these principal components, the meaning of these four principal components has been grasped on the visual. As a result, there is a large individual difference in the shape of neck.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.273-276
• /
• 2003

본 연구에서는 지금까지의 GUI 중심의 웹 어플리케이션을 VUI 중심의 웹 어플리케이션으로 구현하기 위한 음성 인식 항공 정보 시스템을 설계 구현하였다 기존의 ASP(Active Server Page)로써 구현한 윈도우 서버 기반에서 운용되는 시스템에 관한 Web 관련 ASR(Automatic Speech Recognition) 연구가 최근 상당한 연구가 이루어지고 있지만 ASP의 웹과의 제한성으로 인해 시스템의 속도면, 이식성 등에서 제약을 가져왔다. 이와 같은 제약성을 해결하기 위해 본 연구에서는 음성 정보 및 동적 VoiceXML을 구현하는 자바 빈즈(JAVA Beans) 컴포넌트 구조에 대해서 연구해 보았다. 또한 본 연구에서는 Remote An(Abstract Windows Toolkit)기술을 이용하여 GUI 및 VUI에서의 음성 및 그래픽 정보를 동시에 전달 가능하게 하는 Voice 웹 브라우징에 대해서 연구하여 보았다.

• Journal of applied mathematics & informatics
• /
• 제25권1_2호
• /
• pp.109-118
• /
• 2007

A parametric boundary equation is established for the principal period-2 bulb in the cubic Mandelbrot set. Using its geometry, an efficient escape-time algorithm which reduces the construction time for the period-2 bulbs in the cubic Mandelbrot set is introduced and the implementation graphic results display the fascinating fractal beauty.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.273-278
• /
• 1988

This paper represents the computer application techniques of initial and modification machining for dies with 3-dimensional scluptured surfaces. All procedures from die design to die machining and measurement are covered. The component of modelling is data management and modification (extrapolation and smoothing), surface modelling, and nc program preparation. Also this paper introduces the utility for successful and efficient operation of system such as map generation, data communication, tool path verification, contour map generation, graphic processing of extrapolation and smoothing results, and CAD/CAM system interface. Examples are given to illustrate the modelling.