The Proportion of Game Character and Game Image (게임캐릭터의 등신비율과 게임이미지)
-
- Journal of Digital Convergence
- /
- v.14 no.12
- /
- pp.165-172
- /
- 2016
Since the advent of digital games with hardware development a key component of the game characters are changed to retard the rate at which types of users based on their favorite theory of human proportion. Many popular to gamers in the game according to the change in the retard rate in a unique image of the character. Studies on the head and body proportion are thought that up to now been insufficient. The purpose of this study is to examine a fundamental human proportion that has importance as a molding factor in the game character development, it investigated the characteristics of the game character, and classifying the retard rate of the game character, through the research method of analyzing the results, into the retard rate look for and investigate studying the effect on future game images. Five types of game characters that make up the analysis were analyzed with a unique image, and the more specialized users prefer retard rate, the figurative exaggeration to retard rate than the actual main body. Utilizing a bit exaggerated the difficulties of the character looks relatively small proportion character in the graphic wallpaper increased visibility. The proportion of a game character through the study is considered as a very important factor as the game image in the game development.
In this paper, the power spectral density(PSD) for Multilevel Minimum Shift Keyed signal with modulation index h = 1/2 (M-ary MSK) are derived using the mathematical method of the Markov Chain model. At first, according to an essential requirement of the phase continuity characteristics of MSK signals, a complete model of the whole process of signal generation is built. Then, the derivations for autocorrelation functions are carried out precisely. After that, we verified the correctness and accuracy of the theoretical derivation by comparing the derived results with numerical simulations using MATLAB. We also divided the spectrum into four components according to the derivation. By analyzing these figures in the graphic, each component determines the characteristics of the spectrum. It is vital for enhanced spectral characteristics. To more visually represent the energy concentration of the main flap and the roll-down speed of the side flap, the specific out-of-band power of M-ary MSK is given. OMLCD(Optimum Maximum Likelihood Coherent Detection) of M-ary MSK is adopted to compare the signal received with prepared in advance in a code element T to go for the best. And M-ary MSK BER(Bit Error Rate) is compared with the same ary PSK (Phase Shift Keying) with M=2,4,6,8. The results show the detection method could improve performance by increasing the length of L(memory inherent) in the phase continuity.
The research questions of this study were : Will the level of sexual satisfaction of women who have had a hysterectomy 4 months before be decreased compare to the level of sexsual satisfaction before the hysterectomy\ulcorner, Will the level of perceived spouse support of women who have had a hysterectomy 4 months before be decreased compare to the level before the hysterectomy\ulcorner, and What is the relationship between sexual satisfaction and spouse support\ulcorner This is a perspective descriptive correlational study. The number of subjects was 44. The subjects were limited to Korean women who had an abdominal or vaginal hysterectomy for non - malignant diseases, were married(living with their husbands), mentally healthy, and premenopause at the time of operation. The instrument was consisted of 4 items of demo-graphic characteristics, 13 items of spouse support, and 10 items of sexual satisfaction. The instrument of sexual satisfaction was a component of the Derogatis Sexual Function Inventory. Data analysis was done by paired t-test to see the differences between the pre-post scores of sexual satisfaction and spouse support. The Pearson Correlation Coefficiency was calculated to see the relationship between the scores of sexual satis-faction and spouse spport of pre-post hysterectomy. Results were summerized as follow : The mean age of the subjects was 43.5 years : 72.7% of the subjects were above middle school graduates : their mean income level was 1, 453, 000 Korean won and 86.4% of the subjects have had bi-lateral oophrectomy. 1. The scores of sexual satisfaction of women at 4 months after hysterectomy was decreased significantly compare to the score before hysterectomy(paired t=.274, p=.009). 2. The scores of spouse support of the women at 4 months after hysterectomy was not decreased significantly compare to the score before hysterectomy(paired t=.19, p=.847). 3. The scores of sexual satisfaction and spouse support before hysterectomy was significantly related(r=.5186, p=.000). 4. The scores of sexual satisfaction and spouse support at 4 months after hysterectnmy was significantly related(r=.4110, p=.005). It carl be conlcluded that the sexual satisfaction level could be decreased 4 months after the hyster ectomy, but the spouse support level may not be decreased at 4 months after hysterectomy. Further studies have to be done to identify the factors related to the decrease of sexual satisfaction and spouse support after hysterectomy.
This study was designed to assess profile preferences among Korean youths in the year 1992. Facial esthetics was evaluated by means of silhouette profiles, eliminating the influence of a number of aspects that may affect judgment when normal lateral photographs are used. The main points of preference to be clarified here are as follows. First, on facial convexity, Second, on nasion depth, Third, on mentolabial sulcus depth, Fourth, on the position of upper and lower lips, Fifth, on facial type according to Angle's classification of malocclusion, Sixth, on Song's tangents. The 54 subjects printed in questionnaire as black and white silhouettes were selected from 300 tracings from cephalometric radiographs of people whose age ranging from 11 to 20 years. Photographs of six female subjects were retouched by computer graphic software and printed in color and black/white photographs which were used for adaptation of eyes of participants in selecting profiles in silhouette. They constitute 2 questions. The 54 subjects were grouped as 22 questions, each of them composed of 6 subjects, according to the aspects to be clarified. Twenty four questions in total were asked to assess profile preferences. For the assessment, the profile line, the facial esthetic triangle, Song's tangents, and Angle's classification of malocclusion were introduced. The profile line is composed of 11 component points which are Trichion, Glabella, Nasion, Pronasale, Subnasale, Labrale superius, Stomion, Labrale inferius, Supramentale, Pogonion, and Gnathion. The facial esthetic triangle is composed of 3 tangents: A-tangent which is the tangent of dorsum of nose, B-tangent which is the line passing through Sn and Ls, and C-tangent which is drawn on the turning point of the curve which lies between mentolabial sulcus (Sm) and pogonion (Pg). Angle's classification has 3 types of malocclusion which are Class I, Class II, and Class III. Class II malocclusion is subdivided into Division 1 and Division 2. The participants of the survey were composed of 861 college students (448 male students, 413 female students) whose majors grouped as Fine Arts. Liberal Arts, and Natural Sciences, and whose mean age 21.8 years. The statistics program SPSS/PC + of SPSS Inc. was used to analyze answers of participants. Crosstabulation, Chi-square test, and Kendall test were done. The conclusions are as follows: First, Korean youths have a tendency to prefer the slightly convex face to the flat or concave face. Second, they prefer a moderately deep nasion. Third, they prefer a moderately deep mentolabial sulcus. Fourth, they prefer the position of lips which are near to Ricketts' E-line. The position of the upper lip which is slightly posterior to E-line is preferred. The upper lip which lies too far anterior or posterior to the lower lip is not perferred. Fifth, they prefer most, according to Angle's Classification of Malocclusion, Class I facial profile which has a slight inclination to Class II division 2. The order of preference is Class I, Class II division 2, Class III, and Class II division 1. Sixth, they prefer the type 2 and 3 of Song's tangents. The facial profile within which A-and B-tangent meet is preferred. The facial profile which has Cotangent that .meets with A-tangent slightly posterior to the crossing point of A-and B-tangent or that parallels with B-tangent is preferred.
In the experiment, gene actions were analyzed for seven silkworm varieties in order to obtain basic information on their genetic improvement by diallel crosses. The results obtained were summarized as follows : in analysis of variance, significantly maternal and reciprocal effects were observed for all character except female cocoon shell percentage and female pupal weight. Over-dominance was shown by Vr-Wr graphic analysis in three characters such as female cocoon weight, female and male pupal weight, and partial dominance in five characters such as male cocoon weight, cocoon shell percentage in both female and male. Component of genetic varience analyzed for five characters such as male cocoon weight, cocoon shell weight, cocoon shell percentage in both female and male showed that additive effects were higher than dominant effects, and female cocoon weight showed dominant effects higher than additive effects. Heritability of narrow sence was higher more than 0.51 and heritability of broad sence was higher more than 0.77 in all characters except for female pupal weight. The directions of dominance were negative for female cocoon shell weight and somewhat higher for female and male cocoon shell percentage. Meanwhile cocoon weight, pupal weight in both female and male showed positive in the direction of dominance.
Korea-Japan Joint VLBI Correlator (KJJVC) is being developed by collaborating KASI (Korea Astronomy and Space Science Institute), Korea, and NAOJ(National Observatory of Japan), Japan. In early 2010, KJJVC will work in normal operation. In this study, we developed the software correlator which is based on VCS (VLBI Correlation Subsystem) hardware specification as the core component of KJJVC. The main specification of software correlator is 8 Gbps, 8192 output channels, and 262,144-points FFT (Fast Fourier Transform) function same as VCS. And the functional algorithm which is same as specification of VCS and arithmetic register are adopted in this software correlator. To verify the performance of developed software correlator, the correlation experiments were carried out using the spectral line and continuum sources which were observed by VERA (VLBI Exploration of Radio Astrometry), NAOJ. And the experimental results were compared to the output of Mitaka FX correlator by referring spectrum shape, phase rate, and fringe detection and so on. Through the experimental results, we confirmed that the correlation results of software correlator are the same as Mitaka FX correlator and verified the effectiveness of it. In future, we expect that the developed software correlator will be the possible software correlator of KVN (Korean VLBI Network) with KJJVC by introducing the correlation post-processing and modifying the user interface as like GUI (Graphic User Interface).
Nowadays, XML has been favored by many companies internally and externally as a means of sharing and distributing data. there are many researches and systems for modeling and storing XML documents by an object-oriented method as for the method of saving and managing web-based multimedia document more easily. The representative tool for the object-oriented modeling of XML documents is UML (Unified Modeling Language). UML at the beginning was used as the integrated methodology for software development, but now it is used more frequently as the modeling language of various objects. Currently, UML supports various diagrams for object-oriented analysis and design like class diagram and is widely used as a tool of creating various database schema and object-oriented codes from them. This paper proposes an Efficinet Query Modelling of XML-GL using the UML class diagram and OCL for searching XML document which its application scope is widely extended due to the increased use of WWW and its flexible and open nature. In order to accomplish this, we propose the modeling rules and algorithm that map XML-GL. which has the modeling function for XML document and DTD and the graphical query function about that. In order to describe precisely about the constraint of model component, it is defined by OCL (Object Constraint Language). By using proposed technique creates a query for the XML document of holding various properties of object-oriented model by modeling the XML-GL query from XML document, XML DTD, and XML query while using the class diagram of UML. By converting, saving and managing XML document visually into the object-oriented graphic data model, user can prepare the base that can express the search and query on XML document intuitively and visually. As compared to existing XML-based query languages, it has various object-oriented characteristics and uses the UML notation that is widely used as object modeling tool. Hence, user can construct graphical and intuitive queries on XML-based web document without learning a new query language. By using the same modeling tool, UML class diagram on XML document content, query syntax and semantics, it allows consistently performing all the processes such as searching and saving XML document from/to object-oriented database.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70