• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.4
• /
• pp.423-430
• /
• 2010

Hot closed-forging process and the die used for forming an automotive flange were analyzed from the viewpoints of heat transfer, grain-flow lines, and stresses to obtain a forged product without defects such as surface cracks, laps, cold shots, and partial filling. The forging process including up-set, pre-forging, final forging and pressing forces was investigated using finite element analysis. The influence of the preform die and the ratio of the heights of the upper die to lower die on the forging process and die were investigated and a die shape ($10^{\circ}$ for the preform die, and 1.5:1 ratio for the final die) suitable to achieve successful forging was determined on the basis of a parametric study. All parametric design requirements such as strength, full filling, and a load limit of 13,000 KN were satisfied for this newly developed flange die. New dies and flanges were fabricated and investigated. Defects such as partial filling and surface cracks were not observed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.53-53
• /
• 2011

As the dimension of Cu interconnects has continued to reduce, its resistivity is expected to increase at the nanoscale due to increased surface and grain boundary scattering of electrons. To suppress increase of the resistivity in nanoscale interconnects, alloying Cu with other metal elements such as Al, Mn, and Ag is being considered to increase the mean free path of the drifting electrons. The formation of Al alloy with a slight amount of Cu broadly studied in the past. The study of Cu alloy including a very small Al fraction, by contrast, recently began. The formation of Cu-Al alloy is limited in wet chemical bath and was mainly conducted for fundamental studies by sputtering or evaporation system. However, these deposition methods have a limitation in production environment due to poor step coverage in nanoscale Cu metallization. In this work, gap-filling of Cu-Al alloy was conducted by cyclic MOCVD (metal organic chemical vapor deposition), followed by thermal annealing for alloying, which prevented an unwanted chemical reaction between Cu and Al precursors. To achieve filling the Cu-Al alloy into sub-100nm trench without overhang and void formation, furthermore, hydrogen plasma pretreatment of the trench pattern with Ru barrier layer was conducted in order to suppress of Cu nucleation and growth near the entrance area of the nano-scale trench by minimizing adsorption of metal precursors. As a result, superconformal gap-fill of Cu-Al alloy could be achieved successfully in the high aspect ration nanoscale trenches. Examined morphology, microstructure, chemical composition, and electrical properties of superfilled Cu-Al alloy will be discussed in detail.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.296-304
• /
• 2018

The objective of this study was to analyze the impact of climate change on rice yield and quality. Experiments were conducted using SPAR(Soil-Plant-Atmosphere-Research) chambers, which was designed to create virtual future climate conditions, in the National Institute of Crop Science, Jeonju, Korea, in 2016. In the future climate conditions($+2.8^{\circ}C$ temp, 580 ppm $CO_2$) of year 2051~2060 according to RCP 8.5 scenario, elevated temperature and $CO_2$ accelerated the heading date by about five days than the present climate conditions, resulted in a high temperature environment during grain filling stage. Rice yield decreased sharply in the future climate conditions due to the high temperature induced poor ripening. And the spikelet numbers, ripening ratio, and 1000-grain weight of brown rice were significantly decreased compared to control. The rice grain quality was also decreased sharply, especially due to the increased immature grains. In the future climate conditions, expression of starch biosynthesis-related genes such as granule-bound starch synthase(GBSSI, GBSSII, SSIIa, SSIIb, SSIIIa), starch branching enzyme(BEIIb) and ADP-glucose pyrophosphorylase(AGPS1, AGPS2, AGPL2) were repressed in developing seeds, whereas starch degradation related genes such as ${\alpha}-amylase$(Amy1C, Amy3D, Amy3E) were induced. These results suggest that the reduction in yield and quality of rice in the future climate conditions is likely caused mainly by the poor grain filling by high temperature. Therefore, it is suggested to develop tolerant cultivars to high temperature during grain filling period and a new cropping system in order to ensure a high quality of rice in the future climate conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.402-408
• /
• 2002

Rice cultivar 'Janganbyeo' was cultivated by irrigating the saline waters of high salinity (3.0%) and medium saliniy (1.5%) for 4 days, and low salinity (0.5%) for 30 days at tillering, early meiosis and heading stage. Leaf injury due to salinity was most severe at tillering stage in 1999, but at heading stage in 2000. Heading date was delayed by 1 to 5 days by treatment of saline waters only at tillering stage. Culm length and panicle length were most severely shortened by treatment at early meiosis stage. Yield and yield components except for panicle number were decreased most by high salinity treatment regardless of growth stages. In particular, ripening ratio and grain weight among the yield components were decreased most conspicuously by the saline water treatment regardless of salinity and growth stage. Regarding grain weight grain-filling rate and duration, there is no remarked difference among the concentrations and treatment durations of saline water at tillering stage. However, their reductions were very different among the concentrations and treatment durations of saline water at early meiosis stage, being greatest when treated with high salinity for 4 days and followed by low salinity for 30 days. Also their reductions were very severe only when treated with high salinity for 4 days at heading stage.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.238-238
• /
• 2017

Salt stress is one of the deteriorating abiotic stresses due to the climate change, which causes over-accumulation of $Na^+$ and $Cl^-$ ions in plants and inhibits the growth and yield of rice especially in coastal Southeastern Asia. The yield components of rice plant (panicle number, spikelet number per panicle, 1000-grain weight, % of ripened grains) that are majorly affected by salt stress vary with growth stages at which the plant is subjected to the stress. In addition, the salt sensitivity of each yield component differs among rice varieties even when the salt-affected growth stage was same, which indicates that the physiological mechanism to maintain each yield component is different from each other. Therefore, we hypothesized that rice plant has different genes/QTLs that contribute to the maintenance of each yield component. Using a Japanese leading rice cultivar, Koshihikari, and salt-tolerant Nona bokra's chromosome segment substitution lines (CSSLs) with the genetic background of Koshihikari (44 lines in total) (Takai et al. 2007), we screened higher yielding CSSLs under salinity in comparison to Koshihikari and identified the yield components that were improved by the introgression of chromosome segment(s) of Nona bokra. The experiment was conducted in a salinized paddy field. One-month-old seedlings were transplanted into a paddy field without salinity. These were allowed to establish for one month, and then the field was salinized by introducing saline water to maintain the surface water at 0.4% salinity until harvest. The experiments were done twice in 2015 and 2016. Although all the CSSLs and Koshihikari decreased their yield under salinity, some CSSLs showed relatively higher yield compared with Koshihikari. In Koshihikari, all the yield components except panicle number were decreased by salinity and % of ripened grains was mostly reduced, followed by spikelet number per panicle and 1000-grain weight. When compared with Koshihikari, keeping a higher % of ripened grains under salinity attributed to the significantly greater yield in one CSSL. This indicated that the % of ripened grains is the most sensitive to salt stress among the yield components of Koshihikari and that the Nona bokra chromosome segments that maintained it contributed to increased yield under salt stress. In addition, growth analyses showed that maintaining relative growth rate in the late grain filling stage led to the increased yield under salt stress but not in earlier stages.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.301-301
• /
• 2017

Subspecific difference of the percentage of white immature kernels (WIK) between japonica and indica rice cultivars was analyzed in relation to ripening temperature and yield characters. Thirty-three Chinese and 10 Japanese rice cultivars, including 32 japonica and 11 indica, were cultivated with three different cropping seasons for three years. The results were as follows: (1) Indica had less number of panicles, larger number of spikelets per panicle with higher yield, and longer and narrower kernels than japonica. In japonica, Chinese cultivars had less number of panicles and larger number of spikelets per panicle than Japanese cultivars. In addition, WIK was significantly higher in Chinese cultivars than in Japanese cultivars, because of the higher percentage of milky white kernels, even at similar temperature conditions during ripening. On the other hand, WIK in indica was not significantly different between the production areas and between the cropping seasons. (2) Regardless of subspecies, WIK in a large number of Chinese cultivars increased with increasing temperature during ripening within 20 days after heading, while this relation was uncommon in Japanese cultivars, showing the low temperature response. However, some Chinese cultivars had the low WIK with the low temperature response. (3) WIK in japonicawas positively correlated with 1000-kernel weight, spikelet density, kernel width and thickness, but negatively correlated with panicle length and grain filling percentage, while in indica it was positively correlated with panicle number per area, grain filling percentage, brown rice yield and kernel width, but negatively correlated with kernel length. These results indicated that WIK in both subspecies had a close relation to kernel size, and that WIK was high in japonica cultivars with wide and thick kernels and in indica cultivars with short and wide kernels.

• Geomechanics and Engineering
• /
• v.12 no.3
• /
• pp.399-415
• /
• 2017

A series of direct shear tests were conducted to investigate the frictional properties of the interface between structures and the filling soil of Chongqing airport fourth stage expansion project. Two types of structures are investigated, one is low carbon steel and the other is the bedrock sampled from the site. The influence of soil water content, surface roughness and material types of structure were analyzed. The tests show that the interface friction and shear displacement curve has no softening stage and the curve shape is close to the Clough-Duncan hyperbola, while the soil is mainly shear contraction during testing. The interface frictional resistance and normal stress curve meets the Mohr-Coulomb criterion and the derived friction angle and frictional resistance of interface increase as surface roughness increases but is always lower than the internal friction angle and shear strength of soil respectively. When surface roughness is much larger than soil grain size, soil-structure interface is nearly shear surface in soil. In addition to the geometry of structural surface, the material types of structure also affects the performance of soil-structure interface. The wet interface frictional resistance will become lower than the natural one under specific conditions.

• Korean Journal of Materials Research
• /
• v.9 no.2
• /
• pp.124-131
• /
• 1999

Copper film, which is expected to be used as interconnection material for 1 giga DRAM integrated circuits was deposited on hole and trench patterns by Metal Organic Chemical Vapor Deposition(MOCVD) method. After a reflow process, contact and L/S patterns were filled by copper and the characteristics of the Cu reflow process were investigated. When deposited Cu films were reflowed, grain growth and agglomeration of Cu have occurred in surfaces and inner parts of patterns as well as complete filling in patterns. Also Cu thin oxide layers were formed on the surface of Cu films reflowed in $O_2$ambient. Agglomeration and oxidation of Cu had bad influence on the electrical properties of Cu films especially, therefore, their removal and prevention were studied simultaneously. As a pattern size is decreased, preferential reflow takes place inside the patterns and this makes advantages in filling patterns of deep submicron size completely. With Cu reflow process, we could fill the patterns with the size of deep sub-micron and it is expected that Cu reflow process could meet the conditions of excellent interconnection for 1 giga DRAM device when it is combined with Cu MOCVD and CMP process.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.3
• /
• pp.155-163
• /
• 2022

The tillering potential of panicle number type (PNT) rice greatly varies with planting density. Moreover, grain filling and ripening differ depending on the panicle position, which may further affect rice grain quality. The present study evaluated the grain quality of PNT rice sparsely planted to reduce production costs. The physicochemical characteristics of starch from the grains of PNT type rice 'Ilpum' planted at different densities (37, 50, 60, and 80 plants/3.3 m²) and at different positions of panicles (upper or lower on the culm) were determined. Overall, as the planting density decreased, the number of panicles increased but the starch content decreased, which further reduced the 1,000-grain weight. In particular, at the lowest density (37 plants/3.3 m²), protein content increased but particle size, enthalpy, and relative crystallinity decreased. The effects were more pronounced at lower than at upper panicle positions. These findings indicate that tillering potential differs with planting density, ultimately affecting the palatability of rice grains. Based on these findings, we propose restricting rice transplantation to a planting density of ≤37 plants/3.3 m² to achieve the best quality of grains at lower costs and with less labor.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.2
• /
• pp.149-154
• /
• 1992

Buckwheat has been a popular favorite food crop in Korea for a long time. The objective of the study was to investigate the effects of climatic conditions and cultural methods on grain yields of summer buckwheat variety Sinnong 1 planted during the spring season in Suwon, Korea from 1989 to 1991. Frost minimum temperature of late April was -0.3$^{\circ}C$ in 1990 being very low as compared with 3.7$^{\circ}C$ of the normal year, and affected early growth of the seedlings emerging from the soil surface. In late May of 1990, the frost minimum temperature was 7.3$^{\circ}C$ being low as compared with 8.8$^{\circ}C$ of the normal year, and also induced cold injury to fertilization and grain filling. Total precipitation 374.5mm of mid and late June, 1990 provided serious damage to the grain filling and maturing buckwheat seeds and along with causing seed sprouting before harvest. However, the climates of 1989 and 1991 were very good for the growth and development of spring-sown buckwheats. When summer buckwheat cultivar Sinnong 1 was planted on April 20, 1989, its highest grain yields 268-292kg /10a were harvested from the plots of seeding rate 8kg /10a, drill seeding and polyethylene film mulching, and the mean grain yield of the plots was 238kg /10a in 1989, but 64.3kg in Suwon, and 40.2kg /10a in Muan in 1990. In 1991 maximum grain yield 277kg /10a was produced from the April 15 planted and vinyl-mulched plot, and 255kg /10a from the April 25 planted and non-mulched plot. Herbicide Alachlor-sprayed plots produced lower grain yields than no weed control and manual weeding plots. Mechanized drill-seeding saved 83～84% in planting hours as compared with manual broadcasting 21.6 hours /ha, and produced 9% more in grain yields from the two-season croppings of mechanized drill-seeding culture being 364kg /10a in total yields per year.