• 한국농공학회논문집
• /
• 제53권6호
• /
• pp.43-50
• /
• 2011

The fractal method has recently been applied to a model for determining soil grain size distribution. The objective of this study is to review the applicability of the fractal method for a analysis of submarine sedimentary environments by comparing fractal constants with grain size statistical analysis for the soil samples of Pohang (PH) and Namhae (NH). The y-interception of log (grain size)-log (passing) equation was also used because grain size distribution couldn't be expressed with fractal dimension only. The result of comparison between fractal constants (dimension, y-interception) and grain size statistical indices, the fractal dimension was directly proportional to the mean and the sorting. And the y-interception showed high correlation with the mean. The fractal dimension and y-interception didn't show significant correlation with the skewness and the kurtosis. Thus regression equations between fractal constants and two statistical indices (mean, sorting) were derived. All classifications of the mean and the sorting could be determined using the regression equation based on the fractal dimension and y-interception. Therefore, fractal constants could be used as an alternative index representing the sedimentary environments instead of the mean and sorting.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.128-131
• /
• 2003

The number of grain is determined based on Poisson distribution in respectively different active channel and it is converted to grain size which affects to the mobility and threshold voltage. the acquired data is applied to the SPICE for observing the variation of I-V characteristic with several channel lengths. we can confirm the effect on device.

• 한국정밀공학회지
• /
• 제17권2호
• /
• pp.211-219
• /
• 2000

This paper simulated surface grinding process with statistically simulated grinding wheel topography, considering ridge formation phenomenon when grain scratch workpiece. Wheel grain is modeled as hybrid sphere and cone. Grinding wheel characteristic was evaluated with stylus by expanding the scanning region of the profilometer from a straight line to a plane. Each grain's diameter and semi-angle are assumed as normal distribution, each grain's protrusion height from wheel plane is assumed gamma distribution. So grinding wheel is simulated with grain's position randomly distributed without overlapping. Ground surface is 3-dimensionally simulated considering ridge formation of workpiece by each grain's cutting, and then surface profile and surface roughness parameters are compared with real ground workpiece.

• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.653-658
• /
• 1995

Directional effect of applied pressure during sintering on the microstructure and fracture toughness of the heat-treated silicon nitride ceramics has been investigated. The specimens with a composition of 92Si3N4-8Y2O3(in wt%) were sintered at 172$0^{\circ}C$ by a hot press (HP ) and a hot isostatic press (HIP) and heat-treated for grain growth at 1800~20$0^{\circ}C$. The fracture toughness of the HP samples increased with the grain size while the fracture toughness of the HIP treated samples remained the same even though the grain growth occurred. This discrepancy was explained by a bimodal grain size distribution and large aspect ratio of the HPed samples and a monomodal grain size distributjion and samll aspect ratio of the HIP treated samples.

• 한국수자원학회논문집
• /
• 제57권5호
• /
• pp.347-357
• /
• 2024

많은 연구에서 비점착성 부유사의 입경분포를 평균입경와 표준편차를 이용해 묘사한다. 그러나 부유사는 크기가 다른 많은 입자의 혼합물로 구성되어 있다. 난류조건에서 부유사의 이동은 크기와 밀도로부터 계산된 침강속도에 영향을 받는다. 따라서 비점착성 부유사의 이동을 이해하려면 입경 분포를 보다 정량적으로 고려하는 것이 중요하다. 본 연구의 목적은 난류조건에서 부유사의 입경분포를 모의할 수 있는 간편한 모형화 방법을 제시하는 것이다. 점착성 유사와 비점착성 유사의 차이에 대한 이해를 바탕으로, 점착성 부유사를 위한 추계학적 응집 모형을 비점착성 유사의 입경분포 모의에 적합하도록 수정하였다. 본 연구에서 제안하는 간편법의 적용성을 살펴보기 위해 선행연구의 실험자료에 적용하여 모의 결과와 비교하였다. 수치 모의의 결과를 통해 본 연구에서 제안한 모형이 실험값에서 나타나는 주요한 특성을 모사할 수 있다는 점을 확인하였다. 이를 바탕으로 유사 이동 모형을 사용하여 부유사 입경분포를 모의하는 접근 방식이 부유사 입경분포의 중요한 특성을 이해하기에 효과적이라는 결론을 얻었다.

• 한국지형학회지
• /
• 제27권3호
• /
• pp.13-24
• /
• 2020

This study analyzed the characteristics of the grain size distribution of the sediments obtained from the flooding in Ibang-myeon, Changnyeong-gun, which was caused by the collapse of a embarkment on the Nakdong River on August 9, 2020. As a results, it was found that the mean grain size decreases and the sorting becomes poorer as the distance from the embarkment collapse point increases. This is attributed to the fact that the transport energy of the river decreases when flooding occurs, ensuring that coarse-grained sediments are deposited first. Further, as the transport energy further reduces and becomes dispersed, the sorting for the fine-grained sediments becomes poor. Considering the characteristics of spatial distribution, sediments along the farm road showed the properties of floodplain deposits that transport to natural levee and back swamp due to river flooding. On the other hand, sediments along the irrigation ditch exhibited the properties of the deposits that are carried by the flow backward of ditch from the river after the collapse of the embarkment. The results of this study are significant because characteristics of flood sediments were elucidated for major rivers where flooding rarely occurs due to the recently built artificial structures. In addition, by applying the grain size distribution characteristics of present river flood sediments, it will be able to contribute to clarifying the sedimentary environments of the paleo river flood deposits.

• 한국해안·해양공학회논문집
• /
• 제35권6호
• /
• pp.164-172
• /
• 2023

백사장 모래의 입도분포는 해빈의 침식과 퇴적을 파악하는 데 중요한 정보를 제공한다. 모래의 입도분포 분석에 보편적으로 사용되는 체가름시험은 분석 시간이 길고 개별 입자의 형상과 색에 대한 정보를 얻을 수 없다는 한계점이 있다. 본 연구에서는 체가름시험법 보다 측정 과정이 간편하고 효율적인 스마트폰 디지털 이미지를 이용한 입도분포 분석 방법을 제안하였다. 이미지 분석 과정 중 이미지 기울기(Image Gradient) 계산을 통한 입자 경계 추출로 해상도가 상대적으로 낮은 스마트폰 디지털 이미지의 배경으로부터 입자를 효과적으로 검출하였다. 경상북도 4곳의 해수욕장에서 채취한 시료를 이용해 본 연구에서 제안한 경계 추출 이미지 분석법과 경계를 추출하지 않는 분석법을 각각 체가름시험 결과와 비교 검증하였을 때, 본 연구에서 제안한 방식은 D₅₀에서 평균 8.21%의 평균 오차율을 보여 경계를 추출하지 않는 분석법 보다 65% 낮은 오차를 보였다. 따라서 스마트폰 디지털 이미지를 이용한 입도분포 분석은 간편하고 효율적이며 체가름시험에 준하는 정확성을 가짐을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.357-364
• /
• 1999

The purpose of this study is to analysis the grain distribution and compaction characteristics of structural backfill with reclaimed soil. Five(5) reclaimed soil samples which passed #200 sieve have been used in the test. The study showed that the maximum dry density and the bearing value rate turned out to be becoming smaller when the more the quantity passed #200 sieve, the smaller the soil grain. The maximum dry density value calculated from the compaction md relative density test showed wet method > compaction method > dry method. The correlation coefficient between Rc and Dr based on the grain distribution and the compaction characteristics showed that the maximum dry density value by the wet method is little higher than the compaction method and dry method.

• 소성∙가공
• /
• 제6권3호
• /
• pp.250-256
• /
• 1997

Hammer forging was employed for Alloy 718 disk. The change in grain size during hot forging depends very much on dynamic recrystallization. The final grain size depends especially on the critical strain$($\varepsilon$_C)$/TEX> for dynamic recrystallization and Zener-Holloman parameter(Z). In this study, the critical strain$($\varepsilon$_C)$, the strain for 50 pct. recrystallization$($\varepsilon$_{0.5})$ and fraction of dynamic recrystallization(Xdyn) were measured by compression tests. FE simulation was also carried out ot predict the evolution of microstructure. The strain, strain rate and temperature distribution predicted by forging simulation can be effectively used to predict the distribution of grain sizes in the forged workpiece. The present model predictions showed an excellent agreement with the microstructural evolution of hammer-forged Alloy 718 disks.

• 한국지반공학회논문집
• /
• 제29권7호
• /
• pp.47-55
• /
• 2013

조립재료의 요소시험에서 장비에 허용되는 조립재료의 입자크기가 실제 현장에서 사용되는 입자크기에 비해 작은 경우가 종종 발생하기 때문에, 이러한 경우에는 시험에 사용되는 재료의 최대입경을 시험장치의 가용 크기까지 축소시켜 시험을 수행하게 된다. 본 연구에서는 이처럼 최대입경 크기를 축소시켜 입도를 조정했을 때, 저변형률에서의 탄성계수에 미치는 영향을 평가하기 위해 대형반복삼축압축시험을 수행하였다. 본 연구 대상재료의 시험 결과, 입도 조정된 시편들은 원입도 시편의 탄성계수를 과소평가하는 경향이 있었으며, 그 차이는 저변형률에서 더 크게 발생되었다.