• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.3
• /
• pp.219-225
• /
• 1981

Strong wind of 6.5m/s from electric fan was applied to rice at heading stage to find out the nature of wind damage to panicle. Damaged panicles caused by typhoon were sampled out of field to measure the yield and milling components. Wind-treated glumes were developed into two forms, fertile and sterile, and each of them showed all degree of glume discoloration. The number of fertile grains were higher than sterile grains in a damaged panicle. Averagesdegree of glume discoloration was higher in not flowered glume than in flowered glume. The more recently flowered glumes resulted the higher degree of discoloration among flowered glume. The percent of sterile grain to total number of grains was the highest at stage of just flowering. The glume discoloration representing wind damage at heading state advanced in degree in ten days after treatment compared to that just after treatment. Grain length and grain width were decreased with the increased degree of glume discoloration, while grain thickness was not changed greatly. Chalkiness was a little higher in damaged grain than in normal grain without definite trends by degree of discoloration. Ripening ratio, 1000 grain weight and yield decreased with increased degree of glume discoloration in damaged panicle by typhoon. Decreasing order in yield was white rice, rough rice and brown rice. Ratio of brown rice to rough rice increased, white rice to brown rice decreased, and milling recovery was not changed greatly with increased degree of 히ume discoloration.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.3
• /
• pp.386-392
• /
• 1996

A numerical method based on genetic algorithms was introduced to characterize the grain-size distribution more effectively. This technique was proved significant particularly for multimodal size distributions, as was verified for samples from Korea Strait continental shelf. Sediment samples collected from the Korea Strait continental shelf revealed that $96\%$ of the grain-size distributions were multimodal. Therefore, the use of grain-size parameters was not the ideal method. As an alternative method, the decomposition of sue curves into elementary normal component curves was used. Means and standard deviations of 593 decomposed normal components were calculated by a numerical method from 268 size curves of Korea Strait sediments. The mean values of decomposed normal components showed peaks at $1\~3\phi\;and\;7\~9\phi$ size classes. The plot of mean and standard deviation values of the coarse fraction normal components on the map showed a characteristic areal distribution. The characteristic distribution was found to derive from underlying Pleistocene sediment on the basis of sea bottom geologic distribution of the area. The method of decomposition into normal components was found to be more effective than the analysis using traditional grain-size parameters in investigation of multimodal size distribution of Korea Strait shelf sediment.

• Journal of the Korean earth science society
• /
• v.18 no.6
• /
• pp.493-499
• /
• 1997

Grain size analysis have been made for the carbonate-detrital mixed sediments on the continental shelf off the southeastern coast of Korea. The detrital components are well-sorted with mean grain size between 2-3 phi. The detrital components are thought to be deposited in the beach environment during the glacial times when the sea level was low, representing typical 'relict' sediments. Most of the carbonate components consist of shell fragments, and are deeply weathered. They are also interpreted as the relict components that were deposited in the shallow marine environment. The carbonate fraction are coarser-grained and poorly sorted compared to the detrital component. The carbonate components are thought to have experienced the continuous environmental control of fragmentation and selective size sorting after the deposition.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.408-417
• /
• 2016

Purpose: Yield monitoring systems are an essential component of precision agriculture. They indicate the spatial variability of crop yield in fields, and have become an important factor in modern harvesters. The objective of this paper was to review research trends related to yield monitoring sensors for grain crops. Methods: The literature was reviewed for research on the major sensing components of grain yield monitoring systems. These major components included grain flow sensors, moisture content sensors, and cutting width sensors. Sensors were classified by sensing principle and type, and their performance was also reviewed. Results: The main targeted harvesting grain crops were rice, wheat, corn, barley, and grain sorghum. Grain flow sensors were classified into mass flow and volume flow methods. Mass flow sensors were mounted primarily at the clean grain elevator head or under the grain tank, and volume flow sensors were mounted at the head or in the middle of the elevator. Mass flow methods used weighing, force impact, and radiometric approaches, some of which resulted in measurement error levels lower than 5% ($R^2=0.99$). Volume flow methods included paddle wheel type and optical type, and in the best cases produced error levels lower than 3%. Grain moisture content sensing was in many cases achieved using capacitive modules. In some cases, errors were lower than 1%. Cutting width was measured by ultrasonic distance sensors mounted at both sides of the header dividers, and the errors were in some cases lower than 5%. Conclusions: The design and fabrication of an integrated yield monitoring system for a target crop would be affected by the selection of a sensing approach, as well as the layout and mounting of the sensors. For accurate estimation of yield, signal processing and correction measures should be also implemented.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1989.02a
• /
• pp.42-43
• /
• 1989

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.2
• /
• pp.134-138
• /
• 1993

Four lines of the long grain and four lines of the short grain Korean red rices were grown at different nitrogen levels of 0, 7.5, 15.0, 22.5kg /10a. Nitrogen levels and red rice lines were arranged by the respective strip plot design for the long and short grain types. Yield components and yield were tested. Number of panicles per hill and number of spikelet per panicle increased along with the nitrogen levels. One thousand grain weight of the long grain red rices decreased by increasing the nitrogen levels, while that of the short grain red rices was not changed along with nitrogen levels. Grain yield of the long grain red rices increased to the nitrogen level of 22.5kg /l0a, however, that of the short grain red rices increased to the level of 7.5kg /l0a and was not changed over there.

• Korean Journal of Materials Research
• /
• v.31 no.7
• /
• pp.397-402
• /
• 2021

In this study, binderless-WC, WC-6 wt%Co, WC-6wt% 1 and 2.5 B₄C materials are fabricated by spark plasma sintering process (SPS process). Each fabricated WC material is almost completely dense, with a relative density up to 99.5 % after the simultaneous application of pressure of 60 MPa. The WC added Co and Co-B₄C materials resulted in crystalline growth. The WC with HCP crystal structure has respective interfacial energy (basal facet direction: 1.07 ~ 1.34 J·m^-2, prismatic direction: 1.43 ~ 3.02 J·m^-2) that depends on the grain growth direction. It is confirmed that the continuous grain growth, biased by the basal facet, which has relatively low energy, is promoted at the WC/Co interface. As abnormal grain growth takes place, the grain size increases more than twice from 0.37 to 0.8 um. It is found through analysis that the hardness property also greatly decreases from about 2661.4 to 1721.4 kg/mm², along with the grain growth.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.78-85
• /
• 1987

In order for Paldanghomil (winter rye) to be investigated if its grain yield is able to be produced after clipping just before winter season for forage utilization this experiment was carried out under the four sowing dates of four locations in Korea (Chunchon, Suwon, Hwasung and Chungju). In rye clipping plot earlier sowing showed taller plant height, more number of tillers/㎡ and higher forage yield before winter season, indicating the highest forage yield (1803 kg/10a) in Chunchon by sowing of September II. Forage yield of rye before winter season was mainly influenced by plant height and number of tillers/㎡, showing more effect of plant height. Rye plants were more or less affected on winter damages, late heading and short culm by clipping before winter season. Analysis of variance indicated that only number of spikes/㎡ among grain yield components showed the high significance according to the clipping method, and that there showed little variation for other yield components due to the sowing date and clipping method. There showed more grain yield in non-clipping rather than that of clipping plot, indicating the difference of 46kg/10a. This was resulted from short culm and severe winter damages caused by clipping before winter season. Of the grain yield components, number of spikes/㎡ was greatly influenced for grain yield by analysis of stepwise regression. Therefore, grain yield of rye was able to produce after forage utilization before winter season due to the appropriate crop and soil managements, by resulting from the little variation in grain yield between clipping or non-clipping plots and from the higher grain yield by the early sowing.

• Journal of Community Nutrition
• /
• v.8 no.1
• /
• pp.3-8
• /
• 2006

This retrospective study was designed to evaluate the nutrient contributions of the five meal components of school lunch menus planned for elementary students in two school districts (District A and B) in the Midwestern state of the United States. The 4-week cycle menu was planned for two time periods (Period 1 and Period 2) following guidelines for NuMenus and general menu planning principles. Menu components of planned and served menus for two time periods were analyzed using $Nutri-Kids^{TM}$. No significant differences in the nutrient content of between Periods 1 and 2 were found for District A. District B served significantly more vitamin A and total fat in Period 1 and significantly more calories, iron, vitamin A, protein, and total fat in Period 2 than was planned. The major nutrients provided by the entree component included protein, calories, cholesterol, total fat, saturated fat, and sodium. Milk was an important source of calcium and provided approximately one-third of the total protein and vitamin A in the meal. The vegetable/fruit component was the major source of vitamins A and C. The grain/bread component provided approximately 20% of the carbohydrates among five meal components. The miscellaneous component affected the sodium and fat content of the menus. Menu planners can use the results of this study to enhance their knowledge of the nutrient contributions of each meal component and as inputs for planning menus that meet children's nutritional requirements.

• Korean Journal of Metals and Materials
• /
• v.49 no.1
• /
• pp.40-45
• /
• 2011

Using the spark plasma sintering process (SPS process), the WC-6wt.%Co hard materials were densified using an ultra fine WC-Co powder. The WC-Co was almost completely dense with a relative density of up to 100% after the simultaneous application of a pressure of 60 MPa and the DC pulse current for 3 min without any significant change in the grain size. The average grain size of WC that was produced through this experiment was about $0.2{\sim}0.8{\mu}m$. The hardness and fracture toughness were about $1816kg/mm^2$ and $15.1MPa{\cdot}m^{1/2}$, respectively, for 60 MPa at $1200^{\circ}C$.