• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1064-1072
• /
• 2001

It is very important to evaluate material degradation like temper and carbide embrittlements to secure the reliable and efficient operational conditions and to prevent brittle failure in service. The extent of material deterioration can be accurately evaluated by mechanical test such as impact test or creep test. But it is almost impossible to sample a large specimen from in-service plants. Thus, the material degradation evaluation by a non-destructive method is earnestly required. Recently the non-destructive test technique which uses the grain boundary etching characteristics owing to the variation of material structures has been proposed. However the program for material degradation evaluation using the grain boundary etching method(GEM) in Windows 98 domain doesnt be developed now. The aims of this paper are to develop the program and to complete the new master curve equations for the evaluation of material degradation on in-serviced high temperature components.

• 한국재료학회지
• /
• 제23권1호
• /
• pp.41-46
• /
• 2013

The microstructural evolution of AA1050/AA6061 complex aluminum alloy, which is fabricated using an accumulative roll-bonding (ARB) process, with the proceeding of ARB, was investigated by electron back scatter diffraction (EBSD) analysis. The specimen after one cycle exhibited a deformed structure in which the grains were elongated to the rolling direction for all regions in the thickness direction. With the proceeding of the ARB, the grain became finer; the average grain size of the as received material was $45{\mu}m$; however, it became $6.3{\mu}m$ after one cycle, $1.5{\mu}m$ after three cycles, and $0.95{\mu}m$ after five cycles. The deviation of the grain size distribution of the ARB processed specimens decreased with increasing number of ARB cycles. The volume fraction of the high angle grain boundary also increased with the number of ARB cycles; it was 43.7% after one cycle, 62.7% after three cycles, and 65.6% after five cycles. On the other hand, the texture development was different depending on the regions and the materials. A shear texture component {001}<110> mainly developed in the surface region, while the rolling texture components {011}<211> and {112}<111> developed in the other regions. The difference of the texture between AA1050 and AA6061 was most obvious in the surface region; {001}<110> component mainly developed in AA1050 and {111}<110> component in AA6061.

• 한국작물학회지
• /
• 제36권2호
• /
• pp.127-133
• /
• 1991

출수기 전후 일조조건이 수량 및 수량구성요소에 미치는 영향을 구명하고자 벼의 생식생장기인 감수분열기부터 출수후 20일까지 3개 품종군별로 자연광 차광 50%와 75%의 3수준으로 차광처리를하여 시험을 실시한 결과를 요약하면 다음과 같다. 1 온도 및 광도는 차광정도가 클수록 낮아졌고 일중변화는 오후 1시>오후 4시>오전 10시 순 이었다. 2. 출수기는 대체로 2～3일 정도 지연되었으나 상풍벼와 봉광벼는 차광을 하여도 자연광과 차이가 없고 성숙일수는 대체로 전 공시품종에서 8～12일 정도 지연되었다 3. 간장 및 추출도는 품종간에 관계없이 차광 정도가 클수록 간장은 길어지고 추출도는 짧아졌으며 특히 차광 75%에서는 그 정도가 심하였다. 4. 지경퇴화는 일차지경보다 이차지경에서 차광정도가 클수록 퇴화율이 켰다 5. 영화퇴화도 지경퇴화와 비슷한 경향이었으나 조생종군에서 심한 퇴화율을 보였다 6. 영화수는 차광을 했을때 수당 12～15입이 줄었으며 현미 천입중도 차광처리했을때, 감소하는 경향이었으나 그 중에서 소백벼 여명벼 등은 그 폭이 컸다. 7. 차광정도에 따라 불임율은 높았고 등숙율은 감소 경향이 있다. 8. 수량은 차광 50%에서 30～40% 감소하였으며 75% 차광에서는 50%정도 감소하였다.

• 한국작물학회지
• /
• 제41권3호
• /
• pp.354-361
• /
• 1996

신속하고 정확한 근적외선 분광분석법으로 품질분석의 효율성을 증대하기 위하여 화학성분의 변이분포가 검량식 작성과정에 미치는 영향과 측정 정확성에 미치는 관계를 구명하여, 근적외선 분광광도계의 이용 효율성 제고를 위한 기초자료를 얻고자 실시한 실험의 결과는 다음과 같다. 1. 보리 전분에 대한추정치 표준오차는 변이폭이 증대될수록 증가하는 경향을 보였으며, 상관계수도 변이폭이 증대될수록 0.872에서 0.883으로 다소 높아지는 경향을 나타내었다. 2. $eta$-glucan과 단백질은 변이폭이 증대될수록 추정치 표준오차는 낮아지고 상관계수는 높아지는 결과를 보여, 근적외선 분광분석법의 이용성 향상을 위하여서는 이들 성분의 함량변이 확대가 필요할 것으로 생각되었다. 3. 회분은 첫번째와 두번째 group에서는 유의성이 인정되지 않았으나, 세번째 group에서는 상관계수가 0.743으로 유의성이 인정되어 회분함량의 경우에는 어느 정도의 변이폭이 있어야만 근적외선 분광분석법이 가능할 것으로 생각되었다. 4. 겉보리 성분 중 전분과 회분은 재검토가 이루어져야 할 것으로 생각되었으며, $\beta$-glucan과 단백질은 근적외선 분광분석법의 적용이 가능하여 분석의 효율성이 증대될 것으로 생각되었다.

• 비파괴검사학회지
• /
• 제19권6호
• /
• pp.411-419
• /
• 1999

에너지 변환설비와 관련된 기계구조물의 내열재료는 $350^{\circ}C{\sim}550^{\circ}C$의 온도범위에서 장시간 사용되는데 이때 조직의 결정입계에는 불순물 원소(P, Sn, Sb등)의 편석과 탄화물의 석출 등으로 인하여 재료의 취화 현상이 발생되고, 그로 인해 입계강도의 저하가 초래된다. 따라서 노후화된 고온설비의 안전성 및 효율적인 운전조건을 확보하고, 취성파괴 방지를 위해서는 취화손상의 정량적 평가는 매우 중요하다. 그러나 가동중인 고온설비에서 파괴시험을 위한 대량의 시험편채취가 거의 불가능한 경우가 대부분이므로 비파괴적인 시험방법이 요구된다. 본 연구에서는 인공시효열처리된 2.25Cr-1Mo강의 비파괴적인 취화손상도 평가를 위해 적정 부식환경하에서 전기화학적 분극시험 방법에 의한 최적의 평가인자를 조사하였다. 또한 전기화학 시험결과들은 준비파괴시험인 SP시험에 의한 취화도 평가결과와 비교되었다.

• Journal of Biosystems Engineering
• /
• 제34권2호
• /
• pp.114-119
• /
• 2009

Field test was conducted to investigate primary factors reducing rapeseed harvesting using a reciprocating cutter-bar of combine. The results showed that the correlation between crop moisture content and yield loss had a U-type, which indicated that the yield reduction increased at too high and too low crop moisture contents. The proper ranges of crop moisture contents were 27${\sim}$35%, 21${\sim}$56%, and 62${\sim}$73% in case of grain, pod and stem, respectively. Crop moisture content was negatively correlated with header loss, but positively correlated with threshing loss. In contrary, stem moisture content showed positive correlations with total loss, threshing loss and separation loss. Working speed was positively correlated with header loss. Total flow rate, pod flow rate and stem flow rate were highly correlated with threshing loss and separation loss. However, grain flow rate did not show any correlation with total loss. According to the principal component analysis, two principal components were derived as components with eigenvalues greater than 1.0. The contribution rates of the first and the second components were 52.7% and 38.9%, which accounted for 91.6% of total variance. As a contributive factor influencing total loss of rapeseed mechanical harvesting, a crop moisture content factor was greater than a crop flow rate factor. The stepwise multiple regression analysis for total loss was conducted using crop moisture content factor, crop flow rate factor and coefficient. However, the model did not show any correlation among independent and dependent factors ($R^2$=0.060).

• 대한금속재료학회지
• /
• 제50권12호
• /
• pp.921-929
• /
• 2012

The pulsed current activated sintering method (PCAS) is a new rapid sintering method that was developed recently for fabricating ceramics and composites. This method combines a high temperature for a short time with pressure application. In this work, PCAS was used to fabricate $WC-5wt%Mo_2C-5wt%$ Co hard material using WC, $Mo_2C$, and Co. The $WC-Mo_2C-Co$ was almost completely dense with a relative density of up to 100% after the simultaneous application of a pressure of 60 MPa and electric current for 11 min without grain growth. The average grain size of WC that was produced through PCAS was about $0.5-0.6{\mu}m$. The vickers hardness and fracture toughness of the $WC-5wt%Mo_2C-5wt%$Co hard materials were about $2453.5kg/mm^2$ and $7.9MPa{\cdot}m^{1/2}$, respectively, for 60 MPa at $11200^{\circ}C$.

• 한국약용작물학회지
• /
• 제5권3호
• /
• pp.232-236
• /
• 1997

잇꽃 재배시 홍화수확적기 및 이에 따른 종실 (홍화자) 수확적기를 구명하고자 홍화를 개화성기 후 2, 4, 6일, 종설을 개화 성기후 10, 15, 20, 25일에 수확하여 시험한 결과를 요약하면 다음과 같다. 1. 건홍화의 수확적기는 개화후 4일로 수량은 개화 후 2일(28.1kg/10a)에 비하여 유의차가 없었고 색채색차 (${\Delta}Eab$) 로 본 품질도 개화 후 6일에 비하여 1.07로 차이가 작았던 개화 후 4일로 판단되었다. 2. 홍화의 수확유무 및 수확시기에 따른 종실수량은 유의차가 인정되지 않았다. 3. 수확시기에 따른 ha당 종실수량은 개화성기 후 10일 수확 284.8kg에 비하여 수확이 늦추어짐에 따라 백립중이 증가하여 20일 수확시 17%, 25일 수확은 8% 증수되어 홍화의 종실수확적기는 개화후 20일 전후로 판단되었다.

• 열처리공학회지
• /
• 제37권4호
• /
• pp.155-162
• /
• 2024

SCr420H steel which is commonly utilized for automotive components requires the carburizing heat treatment process. Abnormal grain growth during this treatment significantly affects the mechanical properties of the steel parts. Consequently, a process designed to prevent abnormal grain growth at certain elevated temperatures is essential. For enhanced grain refinement, we considered the addition of Nb in SCr420H steel. The experimental condition of the carburizing heat treatment involved reheating the steel sample to temperatures between 940℃ and 1080℃. Using scanning electron microscopy, we examined the microstructure of specimens treated with the secondary solution, revealing an organization of bainite and ferrite. Transmission electron microscopy was utilized to determine the type, shape, and size of the carbonitrides, showing a high fraction of AlN at the secondary solution treatment temperature of approximately 1050℃ and of (Nb,Ti)(C,N) around 1200℃. AlN particles measured about 100 nm and (Nb,Ti)(C,N) about 50 nm. Optical microscopy was utilized to assess grain size variations at different secondary solution treatment temperatures. It is noted that the temperature at which abnormal grain coarsening occurred rose with increasing secondary solution treatment temperatures, indicating a greater influence of (Nb,Ti)(C,N) with higher heat treatment temperatures. This research provides reference data for preventing abnormal grain growth in Nb-added low alloy steels undergoing carburizing heat treatment.

• 한국세라믹학회지
• /
• 제45권12호
• /
• pp.760-765
• /
• 2008

In this study, the effects of small amounts (${\leq}3\;mol%$) of Li doping on the sintering characteristics and electrochemical performance of $(ZrO_2)_{0.89}(ScO_{1.5})_{0.1}(CeO_2)_{0.01}$ (ScSZ) were investigated. By adding 3 mol% lithium, the densification temperature of ScSZ was reduced from the conventional temperature of $1400^{\circ}C$ to $1200^{\circ}C$. It was found that Li doping also led to changes in the Zr:Sc ratio at the grain boundaries. Correspondingly, the dispersion of lithium zirconia at the grain boundaries accelerated the growth of ScSZ grains and increased the grain boundary resistance at temperatures below $450^{\circ}C$. At elevated temperatures of $450{\sim}750^{\circ}C$, the electrical conductivity of the ScSZ after doping remained almost unchanged under air and reducing atmospheres. These results suggest that the addition of lithium is promising for use in low temperature co-firing of ScSZ-based components for intermediate temperature solid oxide fuel cells.