• Applied Microscopy
• /
• v.45 no.3
• /
• pp.170-176
• /
• 2015

In this work, various electron microscopy and analysis techniques were used to investigate the microstructural evolution of a 9% Cr tempered martensite ferritic (TMF) steel T91 upon ultrasonic nanocrystalline surface modification (UNSM) treatment. The micro-dimpled surface was analyzed by scanning electron microscopy. The characteristics of plastic deformation and gradient microstructure of the UNSM treated specimens were clearly revealed by crystal orientation mapping of electron backscatter diffraction (EBSD), with flexible use of the inverse pole figure, image quality, and grain boundary misorientation images. Transmission electron microscope (TEM) observation of the specimens at different depths showed the formation of dislocations, dense dislocation walls, subgrains, and grains in the lower, middle, upper, and top layers of the treated specimens. Refinement of the $M_{23}C_6$ precipitates was also observed, the size and the number density of which were found to decrease as depth from the top surface decreased. The complex microstructure and microstructural evolution of the TMF steel samples upon the UNSM treatment were well-characterized by combined use of EBSD and TEM techniques.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.872-877
• /
• 2002

Two experiments were conducted to determine the effects of reducing particle size of corn from 1,000 to 500 ${\mu}m$ in simple and complex diets for nursery pigs and broiler chicks. In Exp 1., 192 nursery pigs were used in a 24 d growth assay. Treatments were: 1) 1,000 ${\mu}m$ corn in a simple diet; 2) 500 ${\mu}m$ corn in a simple diet; 3) 1,000 ${\mu}m$ corn in a complex diet; and 4) 500 ${\mu}m$ corn in a complex diet. Overall, pigs fed complex diets had 9% greater ADG (p<0.005) and 5% greater gain/feed (p<0.01) compared to pigs fed simple diets. Also, pigs fed the 500 ${\mu}m$ treatments had 3% better overall gain/feed than those fed the 1,000 ${\mu}m$ treatments (p<0.007). At d 9, apparent digestibilities of DM, N and GE were greater for complex diets and diets with smaller particle size (p<0.02). At d 23, there were no differences in nutrient digestibility resulting from diet complexity, but pigs fed diets with corn ground to 500 ${\mu}m$ had greater digestibility of DM (p<0.02) and GE (p<0.003) than pigs fed diets with corn ground to 1,000 ${\mu}m$. A second experiment was designed to determine if four days old broiler chicks were an acceptable model for predicting the effects of feed processing procedures on nursery pigs. Chicks fed complex diets had 3% greater gain/feed than chicks fed simple diets (p<0.001). Rate of gain and feed intake were improved by 3 and 2%, respectively, for chicks fed crumbled diets (p<0.03). However, there were several significant interactions among the main effects. For instance, crumbling did not affect gain/feed in chicks fed complex diets, but rate of gain and feed intake were increased by 7 and 6%, respectively, when simple diets were crumbled (diet complexity${\times}$diet form, p<0.001). Also, gain/feed of chicks was improved by 3% when particle size was reduced in meal diets, but not affected in chicks fed crumbles (diet form${\times}$particle size, p<0.005). Thus, our data suggested that reduction of particle size of corn was important for simple and complex diets and that a complex diet with 1,000 ${\mu}m$ corn gave no better performance than a simple diet with 500 ${\mu}m$ corn.

• Corrosion Science and Technology
• /
• v.9 no.6
• /
• pp.259-264
• /
• 2010

In continuous hot dip galvanizing process, oxide formation on steel surface has an influence on Zn wetting. High strength automotive steel contains high amount of Si and Mn, where Si-Mn composite oxides such as $Mn_2SiO_4$ or $MnSiO_3$ covers the surface after annealing. Zn wetting depends on how the aluminothermia reaction can reduce the Mn-Si composite oxides and then form inhibition layer such as $Fe_2Al_5$ on the steel surface. The outward diffusion of metallic ions such as $Mn^{2+}$, $Si^{2+}$ in the steel matrix is very important factor for the formation of the surface oxides on the steel surface. The surface state and grain boundaries provide an important role for the diffusion and the surface oxide reactions. Some elements such as P, Sb, and B have a strong affinity for the interface precipitation, and it influence the diffusivity of metallic ions on grain boundaries. B oxide forms very rapildly on the steel surface during the annealing, and this promote complex oxides with $SiO_2$ or MnO. P has inter-reacted with other elements on the grain boundaries and influence the diffusion through on them. Small addition of Sb could suppress the decarburization from steel surface and retards the formation of internal and external selective oxides on the steel surface. Interface control by the trace elements such as Sb could be available to improve the Zn wettability during the hot dip galvanizing.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.3
• /
• pp.127-136
• /
• 2017

High pressure has been applied to check the pressure effect on the powdered $TiO_2$-complex, which was synthesized for ultra-violet rays cutoff and antimicrobial applications. $TiO_2$-complex consists of anatase, rutile and silver chloride. Grain size was determined to be ~34 nm. Both anatase and rutile begin structural phase transitions to $ZrO_2$ (baddeleyite)-type crystal structures at 14~16 GPa, then sustain their phases up to 22.7 GPa. Under decompression to 0.0001 GPa (ambient pressure), rutile transforms to another phase with ${\alpha}-PbO_2$ structure, while anatase retains its high pressure structure upon complete decompression. Silver chloride peaks disappear at the low pressures.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.3
• /
• pp.395-399
• /
• 1999

Three experiments were conducted to determine the effects of conditioning a complex (20% whey, 10% lactose, 4% plasma protein, 4% wheat gluten and 2% blood meal) diet on growth performance of weanling pigs. In Exp. 1,180 pigs (average initial BW of 6.4 kg) were fed the experimental diet (1.7% lysine) during a 7-d growth assay. Treatments were a meal control (M), standard (ST), and expander (EX) conditioned mash or pellets. Rate and efficiency of gain were decreased by 39% and 21% (p<0.005) respectively, for pigs fed EX diets compared to those fed the ST diet. In Exp. 2,196 pigs (average initial BW of 6.5 kg) were used to determine the effects of EX operating conditions on nutritional value of a pelleted complex diet. When steam conditioning temperature (prior to expanding) was $54^{\circ}C$, increasing cone pressure of the EX from 0 to 7 to 14 kg/cm2 resulted in linear decreases in rate of gain of weaned pigs (p<0.006), suggesting heat damage of the diet. Increasing conditioning temperature (i.e., adding steam) of the diets from 46 to 54 to $63^{\circ}C$ (cone pressure at $12kg/cm^2$) resulted in improved rate of gain (p<0.04) of the pigs. However, none of the pigs fed expanded diets compared favorably to the pigs fed the conditioned $(54^{\circ}C)$ pellets processed with no cone pressure. In Exp. 3,168 pigs (average initial BW of 6.6 kg) were used to determine the effects of expanding the various components of the diet. Treatments were M and ST pellets as controls, EX-corn, EX-corn soybean-meal, EX corn-soybean meal-oil, and EX-complete diet. Efficiency of gain was increased by 13% with EX portions of the diet compared to the mash control, but there was a marked decrease in performance when the complete diet was expanded (p<0.001). Expanded corn-soybean meal-oil supported the greatest ADG with a 19% increase compared to the average of the EX corn and EX corn-soybean meal treatments (p<0.005). In conclusion, our results suggest no benefit from expanding complete phase-I diets.

• Applied Microscopy
• /
• v.34 no.1
• /
• pp.61-69
• /
• 2004

The microwave dielectric properties and microstructures of the Complex Perovskite (1-x)$(Li_{1/2}Sm_{1/2})TiO_3-x (Na_{1/2}Sm_{1/2})TiO_3$(LNST) system were investigated using the X-ray diffraction (XRD) and scanning electron microscopy (SEM). LNST had not only the antiphase tilting of oxygen octahedron but also the inphase tilting of oxygen octahedron and the antiparallel shift of cations. Also, when $0.0{\leq}x{\leq}0.4$, LNST had the vacancy ordering of A-sites because of the evaporation of Li ions. From the observation of the microstructure, abnormal grain growth phenomena were observed over the whole range of x. The temperature coefficient of resonant frequency ($T_{cf}$) of the $({Li_{1/2}}^{+1}{Sm_{1/2}}^{+3})TiO_3$(LST) system has a large negative value ($-220ppm/^{\circ}C$) but the $({Na_{1/2}}^{+1}{Sm_{1/2}}^{+3})TiO_3$(NST) system which substituted $Na^{+1}$ has a large positive value ($+173ppm/^{\circ}C$). The dielectric properties of ${\varepsilon}_r=103,\;Q*f_{0}=3,700GHz$ and $T_{cf}=+50ppm/^{\circ}C$ at 4GHz were obtained when x =0.4.

• Korean Journal of Organic Agriculture
• /
• v.26 no.4
• /
• pp.629-647
• /
• 2018

This study was carried out to investigate the economic value of organic rice production using gelatin chitin microorganisms in eco-friendly complex, Gongsan, Naju city. The soil condition of experiment paddy field was Jeonbuk series and silt loam with a slightly poor drainage. Except for the high effective silicate, the chemical characteristics of soils used were included in the optimum range of paddy soils in Korea. In growth, plant length, tiller number, ear number, and ear length were observed to be higher in conventional paddy fields than organic paddy fields. However, number of grain per panicle and grain filling ratio (%) were higher in organic paddy fields than conventional paddy fields. Incidences of diseases and insect pests were slightly higher in the organic paddy fields. Water weevil, sheath blight, rice leaf roller and rice blast were more occurred in organic paddy field. On the other hand, false smut was higher occurred in conventional paddy field. There was a significant negative correlation between rice sheath blight and rice leaf roller, and rice yield. In the milled rice quality, the quality of organically cultivated milled rices was lower by the increase of broken rice than that of conventionally cultivated milled rices. The quality and palatability of rice were higher in organic cultivation with decreasing of protein content. Net income of conventionally and organically cultivated rice was 360,000 won/10a and 610,000 won/10a, respectively. Premium net income of the organically cultivated rice was 68%.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.55-58
• /
• 2003

Many researches have been already done on the issues of high temperature deformation and the microstructural evolution. The information has been very useful for the plasticity industry, especially successful for the extrusion. However, the parts made with forging usually have a complex shape. It is difficult to control the distribution of the variables like strain, strain rate and temperature rise due to the working heat during a hot-forging process. Consequently, the microstructural variation could be occurred depending on the plastic deformation history that the forged part would get during a hot forging. In the present study, the microstructural characteristic of a hot-forged 6061 aluminum alloy has been discussed on the aspect of grain size evolution. A forging of 6061 aluminum alloy has been carried out for a complex shape with a dimensional variation. Also, finite element analysis has been done to understand how the deformation variables such as strain, strain rate give an influence on the microstructure of a hot forged aluminum product.

• Journal of Korea Foundry Society
• /
• v.34 no.3
• /
• pp.107-111
• /
• 2014

Permeability is the ability of a material to transmit fluid/gases. It is an important material property and it depends on mould parameters such as grain fineness number, clay, moisture, mulling time, and hardness. Modeling the relationships among these variable and interactions by mathematical models is complex. Hence a biologically inspired artificial neural-network technique with a back-propagation-learning algorithm was developed to estimate the permeability of green sand. The developed model was used to perform a sensitivity analysis to estimate permeability. The individual as well as the combined influence of mould parameters on permeability were simulated. The model was able to describe the complex relationships in the system. The optimum process window for maximum permeability was obtained as 8.75-10.5% clay and 3.9-9.5% moisture. The developed model is very useful in understanding various interactions between inputs and their effects on permeability.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.6
• /
• pp.287-292
• /
• 2008

Dissolution behavior of complex carbonitrides in a Nb-Ti-V microalloyed steel was quantitatively examined by electrical resistivity, transmission electron microscopy (TEM), and optical microscopy. The electrical resistivity increased with solution treatment temperature up to $1250^{\circ}C$ for a holding time of 15 min. But, an increasing rate of electrical resistivity with temperature was obviously decreased above $1150^{\circ}C$. As the solution treatment temperature increases, irregular shaped Nb-rich carbonitrides disappear and cuboidal Ti-rich carbonitrides are observed. Abnormal grain growth occurs above $1250^{\circ}C$ for a holding time of 15 min. The optimal solution treatment temperature of a Nb-Ti-V microalloyed steel was determined as $1200^{\circ}C$ for a holding time of 15 min.