1 |
Ahn D, He Y, Wan Z, Cho I S, Lee C S, Park I G, Pyoun Y S, Dong J, and Shin K (2012) Effect of ultrasonic nano-crystalline surface modification on the microstructural evolution and mechanical properties of Al5052 alloy. Surf. Interface Anal. 44, 1415-1417.
DOI
|
2 |
Amanov A, Cho I S, Pyoun Y S, Lee C S, and Park I G (2012) Microdimpled surface by ultrasonic nanocrystal surface modification and its tribological effects. Wear 286-287, 136-144.
DOI
|
3 |
Chen Y, Sridharan K, and Allen T (2006) Corrosion behavior of ferriticmartensitic steel T91 in supercritical water. Corros. Sci. 48, 2843-2854.
DOI
|
4 |
Cherif A, Pyoun Y, and Scholtes B (2010) Effects of ultrasonic nanocrystal surface modification (UNSM) on residual stress state and fatigue strength of AISI 304. J. Mater. Eng. Perform. 19, 282-286.
DOI
|
5 |
He Y, Chang J, Dong J, and Shin K (2011) Microstructural evolution of X20CrMoV12.1 steel upon long-term on-site exposure in power plants. Adv. Sci. Lett. 4, 1416-1423.
DOI
|
6 |
He Y, Li K, Pyoun Y S, Cho I S, Lee C S, Park I G, Song J I, Yang C W, Lee J H, and Shin K (2014) Characterization of the nano-scale surface layer of a tempered martensitic steel synthesized by ultrasonic nanocrystalline surface modification treatment. Sci. Adv. Mater. 6, 2260-2268.
DOI
|
7 |
S, Wang Z, and Lu K (2010) Strain-induced microstructure refinement in a tool steel subjected to surface mechanical attrition treatment. J. Mater. Sci. Technol. 26, 258-263.
DOI
|
8 |
Morito S, Huang X, Furuhara T, Maki T, and Hansen N (2006) The morphology and crystallography of lath martensite in alloy steels. Acta Mater. 54, 5323-5331.
DOI
|
9 |
Panait C G, Zielinska-Lipiec A, Koziel T, Czyrska-Filemonowicz A, Gourgues-Lorenzon A F, and Bendick W (2010) Evolution of dislocation density, size of subgrains and MX-type precipitates in a P91 steel during creep and during thermal ageing at 600oC for more than 100,000 h. Mater. Sci. Eng. A 527, 4062-4069.
DOI
|
10 |
Payton E J, Aghajani A, Otto F, Eggeler G, and Yardley V A (2012) On the nature of internal interfaces in a tempered martensite ferritic steel and their evolution during long-term creep. Scripta. Mater. 66, 1045-1048.
DOI
|
11 |
Ren X, Sridharan K, and Allen T R (2010) Effect of grain refinement on corrosion of ferritic-martensitic steels in supercritical water environment. Mater. Corros. 61, 748-755.
DOI
|
12 |
Rojas D, Garcia J, Prat O, Sauthoff G, and Kaysser-Pyzalla A R (2011) 9%Cr heat resistant steels: Alloy design, microstructure evolution and creep response at . Mater. Sci. Eng. A 528, 5164-5176.
DOI
|
13 |
Scarlin R B, Knoedler R, and Straub S (2009) Method for the surface treatment of ferritic/martensitic 9-12% Cr steel. United States Patent: US 7,568,368 B2.
|
14 |
Shen Y Z, Kim S H, Cho H D, Han C H, and Ryu W S (2009) Precipitate phases of a ferritic/martensitic 9% Cr steel for nuclear power reactors. Nucl. Eng. Des. 239, 648-654.
DOI
|
15 |
Yu H, Dong J L, Yoo D H, Shin K, Jung J S, Pyoun Y, and Cho I (2009) Effect of ultrasonic and air blast shot peening on the microstructural evolution and michanical properties of SUS304. Korean Phys. Soc. 54, 1161-1166.
DOI
|
16 |
Tan L, Ren X, Sridharan K, and Allen T R (2008) Effect of shot-peening on the oxidation of alloy 800H exposed to supercritical water and cyclic oxidation. Corros. Sci. 50, 2040-2046.
DOI
|
17 |
Umemoto M, Todaka Y, and Tsuchiya K (2003) Formation of nanocrystalline structure in steels by air blast shot peening. Meter. Trans. 44, 1488-1493.
DOI
|
18 |
Wang L M, Wang Z B, and Lu K (2011) Grain size effects on the austenitization process in a nanostructured ferritic steel. Acta Mater. 59, 3710-3719.
DOI
|
19 |
Zhong X Y, Wu X Q, and Han E H (2012) The characteristic of oxide scales on T91 tube after long-term service in an ultra-supercritical coal power plant. J. Supercrit. Fluids 72, 68-77.
DOI
|
20 |
Zhou L, Liu G, Ma X L, and Lu K (2008) Strain-induced refinement in a steel with spheroidal cementite subjected to surface mechanical attrition treatment. Acta Mater. 56, 78-87.
DOI
|