• 자원환경지질
• /
• 제32권5호
• /
• pp.503-517
• /
• 1999

The purpose of this study is to verfify a more effecive techique for calculating geothermal gradient. this study examines 370 data of temperature-logging having been collected since 1985. The daya are divided into three different grades grades according to the type of temperature-depth plots: 204 data show typical linear gradient (Grade A); 126 data do not explicitily show the gradient becase of various external effects such as water flow (Grade B); and the rest 40 data do not show the gradient at all (Grade D). The new technique for calculating geothermal gradient is to be required to use Greade-B data more effctiviely. This new technique includes (1) calculating the independer depth of atmospheric temperature in the earth; (2) drawing a distribution map of subsurface tempurature by using the distribution map of subsurface temperature by using Grade-A data at the independent depth; and (3) recalculating geothermal gradient of Grade-B data by using the distrbution map of subsurface temperature, borehole depth, and bottom temperature of Grade-B data by using the distribution map of subsurface temperature, borehole depth, and bottom temperature of Grade-B data. As a result, 330 data-both Grade-A and Grade-B data--can be used to draw a distribution map of hot spradient. The map clearly distinguishes anomaly areas, and helps interpret their relations to the distribution of hot springs, geology, geological structures, and geophysical anomaly areas. These new results reveal that the average of geothermal in south Korea is 25.6$^{\circ}C$/km, when calculated to the Kriging method.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.111.1-111.1
• /
• 2011

The solar energy is dramatically increasing as the alternative energy source and the silicon(Si) solar cell are used the most. In this study, the improved process and equipment for the metallurgical refinement of multicrystalline Si were evaluated for the inexpensive solar cell. The planar plane and columnar dendrite aheadof the liquid-solid interface position caused the superior segregation of impurities from the Si. The solidification rate and thermal gradient determined the shape of dendrite in solidified Si matrix solidified by the directional solidification(DS) method. To simulate this equipment, the commercial software, PROCAST, was used to solve the solidification rate and thermal gradient. Si was vertically solidified by the DS system with Stober process and up-graded metallurgical grade or metallurgical grade Si was used as the feedstock. The inductively coupled plasma mass spectrometry (ICP) was used to measure the concentration of impurities in the refined Si ingot. According to the result of ICP and simulation, the high thermal gradient between the two phases wasable to increase the solidification rate under the identical level of refinement. Also, the separating heating zone equipped with the melting and solidification zone was effective to maintain the high thermal gradient during the solidification.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1371-1373
• /
• 1996

A clustering algorithms with dynamic adjustment of learning rate for GBFCM(Gradient Based FCM) is proposed in this paper. This algorithm combines two idea of dynamic K-means algorithms and GBFCM : learning rate variation with entropy concept and continuous membership grade. To evaluate dynamic GBFCM, we made comparisons with Kohonen's Self-Organizing Map over several tutorial examples and image compression. The results show that DGBFCM(Dynamic GBFCM) gives superior performance over Kohonen's algorithm in terms of signal-to-noise.

• 한국지리정보학회지
• /
• 제3권1호
• /
• pp.35-43
• /
• 2000

DEM(DTED LEVEL 1)을 ARC/INFO로 처리하여 한반도 지형의 경사도를 분석하였다. 한반도는 완경사 사면이 차지하는 비율이 아주 높고, 평탄지나 급경사지의 비율은 낮게 나타난다. 평탄지와 파상지는 고도 150m 이하 지역에 대부분 분포하고, 경사가 가장 급한 고도대는 500m~1,000m 지역이며, 1,000m 이상 지역은 고원의 경관을 보이고 있다. 수치지질도와 경사분석도를 중첩했을 때 고고도와 급경사를 이루는 지질은 화강편마암(ARgr), 편마암(PR1), 평안계 사암(P-T), 자성층군($J_2$) 등으로 나타났고, 저고도에 완만한 경사를 보이는 지질은 엽리상화강암($Jgr_1$), 백악기 퇴적암($K_1$, $K_2$), 신생대 퇴적암(N) 등이며, 제 4기에 분출한 현무암은 높은 고도에 완만한 용암대지를 이루고 있다.

• Journal of Chest Surgery
• /
• 제20권3호
• /
• pp.610-618
• /
• 1987

A 23-y-o male patient was suffered from intermittent fainting and dyspnea on exertion [NYHA Class IIIIV]. 2-D - Echocardiogram and cardiac catheterization with cineangiogram showed typical IHSS findings those were asymmetrical septal hypertrophy [ASH], systolic anterior motion of anterior mitral leaflet [SAM] which induced mild mitral regurgitation [Seller Grade I/IV] and pressure gradient about 60 mmHg between left ventricle and the aorta. Medical treatment with 8-adrenergic blockade [propranolol] and Ca" channel antagonist [Verapamil] had no response. So, we performed trans-aortic ventricular septal myotomy and mymectomy. Resected rectangular muscle bar was 1 Cm x 1 Cm x 4.5 Cm. Post-operative pressure gradient between the left ventricle and the aorta was less than 10 mmHg and SAM. was disappeared with decreased mitral regurgitation grade. Post-operative course was smooth and his symptoms and signs were free without any medication during 12 months follow-up.w-up.

• 센서학회지
• /
• 제4권2호
• /
• pp.3-6
• /
• 1995

항온 유지 장치의 온도구배를 측정하기 위한 다중 접점을 갖는 K형 열전대를 제작하였다. 이 온도계를 사용하여 $800^{\circ}C$로 유지되고 있는 전기로의 온도구배를 측정하였으며, 교정용 기준기급의 S형 열전대와 비교한 결과 K형 열전대의 허용오차 범위 내에서 일치하였다. 더 정확한 온도구배 측정을 위해서는 귀금속 열전대를 사용하는 것이 바람직하다는 것을 제안하였다.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.513-516
• /
• 2013

Earthmoving equipment's haul-route has a great influence on the productivity of the earth work operation. Haul-route grade is a critical factor in selecting the haul-route. The route that has low grade resistance contributes to increase machine travel speed and production. This study presents a mathematical model called "Hauling-Unit Optimal Routes Selecting system" (HUORS). The system identifies optimal path that maximize the earth-work productivity. It consists of 3 modules, i.e., (1) Module 1 which inputs site characteristic data and computes site location and elevation using GIS(Geographical Information System); (2) Module 2 which calculates haul time; (3) Module 3 which displays an optimum haul-route by considering the haul-route's gradient resistances (i.e., from the departure to the destination) and hauling time. This paper presents the system prototype in detail. A case study is presented to demonstrate the system and verifies the validity of the model.

• 한국도로학회논문집
• /
• 제10권4호
• /
• pp.171-180
• /
• 2008

본 연구는 지반위에 놓여진 콘크리트 슬래브가 온도하중을 받아서 컬링할 때의 거동을 실내 실험을 통해 분석하고 슬래브를 지지하고 있는 하부층의 구성이 슬래브의 컬링 거동에 어떠한 영향을 미치는지를 분석하기 위하여 수행되었다. 실험을 위해 콘크리트슬래브를 제작하고 온도측정센서를 장착하였으며 인위로 온도하중을 가하며 슬래브의 여러 위치에서 변위의 변화를 측정하였다. 하부층은 두 가지의 관점을 고려하여 구성하였으며, 첫째는 단일 하부층을 이용하여 재료와 두께를 달리하여 지지력을 다르게 하는 경우이며, 둘째는 하부층을 복층으로 구성하되 복합지지력은 일정하나 슬래브와 직접 접촉하는 상위하부층의 재료성질을 다르게 하는 경우이다. 실험결과 시간에 따른 슬래브의 수직 변위 변화는 온도구배의 변화와 거의 일치하는 양상을 보였으며 컬링 거동의 특성을 컬업 구간과 컬다운 구간으로 구분하여 분석하였다. 하부층의 지지력은 커질수록 슬래브의 중앙과 코너의 수직 변위 차이는 감소하게 되며 최상위 하부충의 재료 성질이 컬링 거동에 영향을 미치는 것을 알 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1676-1682
• /
• 2008

The vertical curve of railway is installed in changing point where the gradient is more than a certain degree to ensure safe operation of train and comfort of passengers. As a result of CAD work with 3D coordination by using the existing equation, it was found that the simple equation about vertical curve installation suggested in the surveying engineering or railway regulations did not reflect theoretical curvature of circular curve in a case of steep grade and large vertical radius. In this study, for derive precision equation and transition curve about vertical curve, gradient parameters, equation of circles and transition curve equation were used, and it was verified by CAD that the derived equation is exactly satisfied with parameters of geometrical circular and transition curve. This equation could be used to provide more smoothing operation of train and comfort of passengers on vertical curves, especially in case that railway requires precision vertical alignment of track such as super high-speed railway, LRT or Maglev system.

• 한국컴퓨터정보학회논문지
• /
• 제28권8호
• /
• pp.49-58
• /
• 2023

학생들의 중도 탈락은 대학의 재정적 손실 뿐 아니라, 학생 개개인 및 사회적으로도 부정적인 영향을 끼친다. 이러한 문제를 해결하기 위해 기계 학습을 이용하여 대학생들의 중도 탈락 여부를 예측하고자 하는 다양한 시도가 이루어지고 있다. 본 논문에서는 대학생들의 중도 탈락 여부를 예측하기 위해 DNN(Deep Neural Network)과 LGBM(Light Gradient Boosting Machine)을 이용한 모델을 구현하고 성능을 비교하였다. 학습 데이터로는 서울 소재 중소규모 4년제 대학인 A 대학의 20,050명의 학생을 대상으로 수집된 학적 및 성적 데이터를 학습에 이용하였다. 원본 데이터의 140여개의 속성 중 중도 탈락 여부를 나타내는 속성과의 상관계수가 0.1 이상인 속성들만 추출하여 학습하였다. 두 모델의 성능 실험 결과, DNN과 LGBM의 F1-스코어는 0.798과 0.826이었으며, LGBM이 DNN에 비해 2.5% 나은 예측 성능을 보였다.