• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2516-2533
• /
• 2023

Several practical methods for accelerating the depletion calculation in a GPU-based Monte Carlo (MC) code PRAGMA are presented including the multilevel spectral collapse method and the vectorized Chebyshev rational approximation method (CRAM). Since the generation of microscopic reaction rates for each nuclide needed for the construction of the depletion matrix of the Bateman equation requires either enormous memory access or tremendous physical memory, both of which are quite burdensome on GPUs, a new method called multilevel spectral collapse is proposed which combines two types of spectra to generate microscopic reaction rates: an ultrafine spectrum for an entire fuel pin and coarser spectra for each depletion region. Errors in reaction rates introduced by this method are mitigated by a hybrid usage of direct online reaction rate tallies for several important fissile nuclides. The linear system to appear in the solution process adopting the CRAM is solved by the Gauss-Seidel method which can be easily vectorized on GPUs. With the accelerated depletion methods, only about 10% of MC calculation time is consumed for depletion, so an accurate full core cycle depletion calculation for a commercial power reactor (BEAVRS) can be done in 16 h with 24 consumer-grade GPUs.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.2227-2232
• /
• 2003

For a reasonable analysis of grade efficiency of cyclone separator, in-line measurements of particle size and particle concentration are needed. The purpose of this study is to define the correlation of measurement data and to measure grade efficiency and pressure drop. The authors adapted that the grade efficiency could be calculated directly from the counted particle numbers. The problem of collection efficiency calculation was different from counting rate of aerosol counters under the same conditions. It is important factor to use the rate of the particle counters to obtain reliable results. Therefore, the authors should use and calculate compensation factor considering sensitivity of aerosol counters, gas velocity and concentration affect higher 30% than originally measured grade efficiency. As the pressure drop and grade efficiency increase, as flow rate increase and then also pressure drop and grade efficiency increase.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.264-269
• /
• 2013

Purpose: This study was carried out to develop a classification index and grade levels to rate agricultural heaters for energy efficiency classification. Methods: The classification index was developed mainly by taking simplicity of calculation and easy access to relevant data into consideration. The grade levels were developed on the basis of a 5-grade classification system in which graded heaters are to be normally distributed over the grades. The value of each grade level were determined in terms of the classification index values calculated using the published performance data of agricultural heaters tested at the FACT in Korea over the past 12 years. Results: The thermal efficiency of agricultural heaters based on the enthalpy method was proposed as a reasonable classification index. The grade levels were proposed in equation form for three types of agricultural heaters: fossil fuel heaters, wood pellet heaters and wood pellet boilers. A reasonable energy efficiency classification of agricultural heaters could be performed using the proposed classification index and grade levels. Conclusions: It is expected that energy saving programs will be extended to agricultural machines in the near future. The classification index and grade levels to rate agricultural heaters for energy efficiency classification were developed and proposed for such near future to come.

• Journal for History of Mathematics
• /
• v.22 no.2
• /
• pp.81-98
• /
• 2009

Probability plays a very important role in modern society as an essential tool for solving various kinds of problems from our real life or scientific province. However, most of precedent studies on probability pointed out that many students had difficulties in understanding the nature of it, and that probability teaching method in the classroom is easily led only to calculation system, which is isolated from practical applications. In this paper, I make a close study further onto these themes, by analyzing the 8th grade textbooks through these following questions; how do the textbooks deal with calculation of probability that certain two events occur at the same time? On the practical basis, how do they make use of probability as a problem-solving instrument in both actual life and scientific fields? After these, I try to extract some features and issues of probability teaching method in current Korean textbooks.

• Journal of the Korean School Mathematics Society
• /
• v.10 no.4
• /
• pp.471-485
• /
• 2007

In this study, a 27 class hour prescribed program for the fourth grade students is to be developed and applied by extracting the contents associated with basic operations studied prior to the fourth grade level of mixed calculations. After analyzing the results of the research, the following conclusions are obtained. First, the prescribed program for mixed calculations brought about the improvement in the mixed calculation problem solving ability of the students. Second, applying the prescribed program for mixed calculation resulted in an increase in students' interest and concentration on problem solving. In synthesis of the above conclusions, the development and application of the prescribed program for mixed calculation improved the students' concentration on the problem and the students' problem solving ability.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.6
• /
• pp.665-676
• /
• 2021

As the number of deteriorated buildings increases, the importance of safety diagnosis and maintenance of buildings has been rising. Existing visual investigations and building safety diagnosis objectivity and reliability are poor due to their reliance on the subjective judgment of the examiner. Therefore, this study presented the limitations of the previously conducted appearance investigation and proposed 3D Point Cloud data to increase the accuracy of existing detailed inspection data. In addition, this study conducted a calculation of an objective building safety grade using a Deep-Neural Network(DNN) structure. The DNN structure is generated using the existing detailed inspection data and precise safety diagnosis data, and the safety grade is calculated after applying the state evaluation data obtained using a 3D Point Cloud model. This proposed process was applied to 10 deteriorated buildings through the case study, and achieved a time reduction of about 50% compared to a conventional manual safety diagnosis based on the same building area. Subsequently, in this study, the accuracy of the safety grade calculation process was verified by comparing the safety grade result value with the existing value, and a DNN with a high accuracy of about 90% was constructed. This is expected to improve economic feasibility in the future by increasing the reliability of calculated safety ratings of old buildings, saving money and time compared to existing technologies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.184-190
• /
• 2003

In this study, several methods for measuring floor impact sound were introduced. Among them, the simple methods (impedance method and diffuse index method) which can be easily applied to site works were investigated. Moreover, the comparison between the calculation results using diffuse index method and the experimental results measured in real apartment structures was conducted. Consequently, the modified diffuse index method, which can be practically used for predicting the performance of to the floor impact sound of apartment structures and can meet the allowable tolerance of Grade I (${\pm}$5㏈), was proposed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.3
• /
• pp.69-81
• /
• 2009

This study was intended to evaluate the objective landscape of rural region using an additive integration index method in the Seondong region of Gochang-gun, Jeollabuk-do, Korea. This study consisted of the following three steps. First, this study developed an additive integration index calculation model for landscape assessment based on indicators and weight to each space type in accordance with three landscape fields which were developed by the expert Delphi method. Second, this study used NDVI (Normalized Difference Vegetation Index) and permeable area rate, which were available from high resolution satellite image, to calculate the green naturality degree, area rate, and building coverage respectively. Third, this study has calculated the landscape assessment index of rural regions using an additive integration index method made of assessment data and weight for each indicator. This study has found the following results: 1) landscape level was very poor in all 6 types of space, marking grade five; 2) while the highest level of natural landscape and mixed landscape was grade two, that of artificial landscape was grade five; 3) based on objective landscape, grade five showed the highest frequency, and grade one, two, three, and four followed in that order.

• Journal of the Korean School Mathematics Society
• /
• v.2 no.1
• /
• pp.43-53
• /
• 1999

Two (second-grade) classes of Yu-song middle school were chosen to research the effect of the visualization in the learning of probability calculation at a middle school. One class, as an experiment class, was taught the probability calculation of probability unit by the visualization learning and the other, as a controlled class, was taught it by the traditional lecture, and then through the writing tests there was a verification on the effect of right after test and the delaying test after 3 weeks to examine the learning effect of high- and low-level groups. It was difficult for the students to visualize the problems of the probability calculation, but I suggested simple models to the students and helped them to learn meaningfully. As a result of this study, there showed statistically significant difference in high-level group in the right after test.(P< .05) In the delaying test after 3 weeks, there also showed statistically significant marks only in high-level group.(P< .05) The visualization in the learning of probability calculation took more affirmative effect in the experiment class than the comparative class only in high-level group. The students in low-level group has difficulties in the visualization activities, but all the students in high-and low-level group thought the visualization was a great help to them in learning probability calculation.

• Journal of Environmental Health Sciences
• /
• v.28 no.2
• /
• pp.51-60
• /
• 2002

Concerning the water quality management plan about Buk-stream, Ohsip-stream and Gagok-stream water systems in this research, which objectives of abstract is as follows. The result of cleanness degree evaluation of water quality in this research, the first grade was 91% shared in Buk-stream water system. The most point of the middle and upper stream of Buk-stream was maintain extremely clean water quality. Among the researched water system, the first grade of water quality in Ohsip-stream water system was most poor, its first garde rate was 68%. In all water quality check point of Gagog-stream water system was accomplished extremely clean water quality condition of first grade of BOD. The calculation result of pollutant loading density, which were 8.2, 21.5, 4.0kg/day.$\textrm{km}^2$. respectively and basin of Buk-stream and Gagok-Stream have high development potentiality.