• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.711-714
• /
• 2002

This paper presents a method to determine the propagation properties in the junctions between straight and bent waveguides using cylindrical functions of complex order. The proposed method was succeeded by developing the method of numerical calculation of cylindrical functions of complex order. As a result, we numerically calculate the reflection and transmission coefficients in the junctions in various situations, and we compare these results with the results by the perturbation method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.703-705
• /
• 1998

In this paper, we have suggested the method of genetic algorithm to solve the trajectory optimization. The given nonlinear method is so complex and modeling is not easy. Also, we have suggested the nonlinear programming combined with genetic algorithm. The proposed algorithm gives simple and time-reducing method in solving nonlinear dynamic systems.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2001년도 Proceedings of International Convention of the Pharmaceutical Society of Korea
• /
• pp.179.2-180
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• 제17권4호
• /
• pp.385-390
• /
• 1996

It has been well known that the Grad thirteen-moment equations have solutions only when the Mach number is less than a limiting value for the stationary plane shock-waves. The limit of Mach number has been re-examined by including successive terms in the series expansion of distribution function. The method employed is the linear analysis of moment equations near up-streaming and down-streaming flows. For the thirteen moment case, it has been confirmed that equations have solutions only when the Mach number is less than 1.6503, which is consistent with the literature value. For the case of twenty moments, the limit of Mach number is decreased to 1.3416.

• 멤브레인
• /
• 제23권6호
• /
• pp.469-474
• /
• 2013

알칼리 수전해용 격막으로 사용하기 위해 음이온교환막을 제작하였다. 음이온교환막은 PVC (polyvinyl chloride)를 출발물질로 하여 클로로메틸화 및 아민화에 의해 제작하였다. 제작한 막은 막 특성(막 저항, 이온교환용량)을 평가하였다. 제작한 음이온교환막의 1M NaOH수용액에서의 최저 막 저항은 $2.9{\Omega}{\cdot}cm^2$를 나타냈다. 이 막은 2.17 meq./g-dry-membrane의 이온교환용량과 43.4%의 함수율을 보였다. 제작한 음이온교환막의 막 특성을 시판의 막 특성과 비교 평가하였다. 1M NaOH수용액에서의 막 저항은 AHT>IOMAC>Homemade membrane>AHA>APS=AFN의 순으로 저항 값이 높았다. 이온교환 용량은 Homemade membrane>AFN>APS>AHT>AHA>IOMAC의 순으로 높은 값을 가졌다.

• 한국수소및신에너지학회논문집
• /
• 제22권2호
• /
• pp.191-198
• /
• 2011

According to the propagation of fuel cell system, the importance of that system efficiency is being magnified. Thus, the efficiency improvement of reformer which is the important factor of fuel cell system will be required. This study has been experimentally performed to evaluated the performance of plate type STR reactor. At first, we changed fuel flow rate (2, 3 and 4 l/min) in burner, and then we measured a proportion of hydrogen in produced gas through the STR reactor by G.C for evaluating the performance of plate type STR reactor in various fuel supply conditions. And we changed S/C ratio (2 and 4) and measured a proportion of hydrogen in produced gas through the STR reactor. As a results, condition at fuel flow rate 2 and 3 l/min could not be supplied amount of heat for STR sufficiently. Condition at fuel flow rate 4 l/min could supplied a heat excessively. And condition at S/C ratio 2, reaction occurred insufficiency. But condition at S/C ratio 4 was excess. From above, we found the optimum conditions that were fuel rate 3.5 l/min and S/C ratio 3.

• 한국수소및신에너지학회논문집
• /
• 제23권2호
• /
• pp.117-124
• /
• 2012

Alkaline electrolysis needs the electrode having a low overvoltage and good corrosion resistance in alkaline solution such as KOH and NaOH, for the oxygen and hydrogen production. The commercial materials such as SUS(stainless steel)-316, Ni and NiFe were evaluated for the electrode in alkaline electrolysis. The test solution for the alkaline electrolysis used 1~9M NaOH and 1~9M KOH. The voltage increased with an increase of current density in each solution. As for the 15wt.% (about 5M) NaOH, the voltage of the tested electrode under the current density of 1.8A/$cm^2$ showed the almost same value. The voltage over the current density of 1.8A/$cm^2$ deceased in the order: Ni${\fallingdotseq}$NiFe$cm^2$ showed the almost same value. The voltage over the current density of 1.8A/$cm^2$ deceased in the order: NiFe${\fallingdotseq}$SUS-316. From the results, it was estimated that NiFe and Ni was suitable as the electrode for the alkaline water electrolysis using NaOH and KOH electrolyte.

• 한국수소및신에너지학회논문집
• /
• 제23권3호
• /
• pp.236-242
• /
• 2012

This study has been carried out the experiment for the possibility of biogas reforming using waste heat. The source of this waste heat is the exhaust gas from a small-sized gas engine generator. For recovering the waste heat, Two-stage heat exchanger is manufactured. The two-stage heat exchanger is composed of a heat exchanger for the exhaust gas and a heat exchanger for the water. This two-stage heat exchanger is used for reforming the biogas by means of on-site hydrogen production at the small-sized gas engine generator. The two-stage heat exchanger is coupled with the biogas reformer which is a kind of catalytic reformer. To confirm a heat recovery efficiency of the two-stage heat exchanger, temperature differences of inlet and outlet locations are measured. Also, the variations of syngas concentrations with various biogas flow rates are investigated. As a result using manufactured two-stage heat exchanger, the biogas can be reformed from waste heat recovery. This experiment suggests that the exhaust gas heat exchanger is available for reforming the biogas.

• 한국수소및신에너지학회논문집
• /
• 제27권2호
• /
• pp.169-175
• /
• 2016

The electrolyte added the chlorosulfuric acid ($HSO_3Cl$) as an additive was tested for the electrolyte in all-vanadium redox flow battery (VRFB) to increase the thermal stability of electrolyte. The electrolyte property was measured by the CV (cyclic voltammetry) method. The maximum value of a voltage and current density in the electrolyte added $HSO_3Cl$ was higher than that in the electrolyte non-added $HSO_3Cl$. The thermal stability of the pentavalent vanadium ion solution, which was tested at $40^{\circ}C$, increased by adding $HSO_3Cl$. The performances of VRFB using the electrolyte added and non-added $HSO_3Cl$ were measured during 30 cycles of charge-discharge at the current density of $60mA/cm^2$. An average energy efficiency of the VRFB was 72.5%, 82.4%, and 81.6% for the electrolyte non-added $HSO_3Cl$, added 0.5 mol of $HSO_3Cl$, and added 1.0 mol of $HSO_3Cl$, respectively. VRFB using the electrolyte added $HSO_3Cl$ was showed the higher performance than that using the electrolyte non-added $HSO_3Cl$.

• 한국정보통신학회논문지
• /
• 제24권2호
• /
• pp.204-211
• /
• 2020

본 논문에서는 약한 지도학습을 통한 주 객체 위치 검출을 위한 최적의 딥러닝 네트워크 구조를 제안한다. 제안된 네트워크는 약한 지도학습을 통한 주 객체의 위치 검출 정확도를 향상시키기 위해 컨벌루션 블록을 추가하였다. 추가적인 딥러닝 네트워크는 VGG-16을 기반으로 합성곱 층을 더해주는 5가지 추가적인 블록으로 구성되며 객체의 실제 위치 정보가 필요하지 않는 약한 지도 학습의 방법으로 학습하였다. 또한 객체의 위치 검출에는 약한 지도학습의 방법 중, CAM에서 GAP이 필요하다는 단점을 보완한 Grad-CAM을 사용하였다. 제안한 네트워크는 CUB-200-2011 데이터 셋을 이용하여 성능을 테스트하였으며 Top-1 Localization Error를 산출하였을 때 50.13%의 결과를 얻을 수 있었다. 또한 제안한 네트워크는 기존의 방법보다 주 객체를 검출하는데 더 높은 정확도를 보인다.