• 천문학논총
• /
• 제14권2호
• /
• pp.57-60
• /
• 1999

We derive the Grad-Shafranov equation in the Macdonald-Thorne magnetosphere of the super-massive black hole in an active galactic nucleus. Our major assumption is that the plasma velocity is not only toroidal but also poloidal. As a result, we get the correction terms which are related to the poloidal motion of plasma like electrodynamic jets.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 추계학술발표대회
• /
• pp.479-480
• /
• 2023

생성형 인공지능은 학습의 기준을 파악하기 어려운 모델이다. 그 중 DCGAN을 분석하여 판별자를 통해 생성자의 학습 기준을 판단할 수 있는 하나의 방법을 제안하고자 한다. 그 과정에서 XAI 기법인 Grad-CAM을 활용하여 학습 시에 모델이 중요시하는 부분을 분석하여 적합한 학습과 학습에 적합하지 않은 데이터를 분석하는 방법을 소개하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.316-320
• /
• 1991

The dielectric properties of the ZnO varistor fabricated by the method of 3-composition seed grain was studied. In this paper, we present the C-V charateristic for the specimen. The dielectric constant and disppation which changed with additives may be explained on the basis of the deplation layer; the presence of deplation layer has been inferred by donor and state density obtained from the $1/C^2$ vs. V.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1091-1094
• /
• 2005

This paper formulates the parameter estimation of cornering behavior of a vehicle. Especially some vehicle parameter is very important on stability control of chassis by ECU, but some parameter is so hard to get by sensor which parameter is included the nonlinear characteristic of tire cornering force. So we need to deduce that parameter from used signal and numerical method. In this study, we propose a estimation method and present the simulation by parameter estimation technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.883-885
• /
• 1992

DC dielectric breakdown properties of epoxy composites with various additives rates and curing conditions were investigated at the temperature range from 20[$^{\circ}C$] to 180[$^{\circ}C$]. At low temperature an improvement of the characteristics is observed due to curing agents. The additions of filter is lower the temperature dependences of the breakdown strength. Samples treated with silan have a higher breakdown strength than non-treating filled samples.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.49-50
• /
• 2006

Photoelasticity is widely and conveniently used methods for whole field stress analysis. In this paper, 8-step photoelastic phase shifting method was performed by using a multi-purpose polariscope to measure the fringe orders along a specified line on the specimen containing a square hole. The material of the specimen is made of Polycarbonate. The measurement results by 8-step phase shifting method were compared with the those calculated by ABAQUS.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.715-718
• /
• 2002

A control strategy for a dynamic system under Irregular disturbance by using stochastic controller is developed. In order to design stochastic controller. system dynamic model in real domain is transformed dynamic moment equation in stochastic domain by F-P-K approach. A study of real time control technique for stochastic controller is presented. The performance of stochastic controller is verified through experiment used by real time control technique method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.310-313
• /
• 2005

In recent years, as the robot technology is developed, the researches on the artificial muscle actuator that enable robot to move dexterously like biological organ become active. The widely used materials for artificial muscle are the shape memory alloy and the electro-active polymer. These actuators have the higher energy density than the electro-mechanical actuator such as motor. However, there are some drawbacks for actuator. SMA has the hysterical dynamic characteristics. In this paper, the simulation of anthropomophic robotic hand is performed using ADAMS and the segmented binary control for reducing the hysteresis of SMA is proposed. SMA is controlled by thermo-electric module. The relations between the force and the hysteresis are developed to verify the validity of the suggested method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.314-317
• /
• 2005

As demands of VBNS and VDSL increase, the development of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, and WDM elements increases. The alignment and the attachment technology are very important in the fabrication of optical elements. The ultra precision stage wasn't yet applied in the optical alignment and the optical element alignment was taken too many times. In this paper, the optical element alignment of ultra precision positioning stage was studied. The alignment algorithm is comprised of field search and peak search algorithms. The procedure of the alignment algorithms applied to the ultra precision positioning stage are developed by LabView programming.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2020년도 하계학술대회
• /
• pp.709-713
• /
• 2020

본 논문에서 육안으로도 구별하기 힘든 송전선과 같은 객체가 포함된 송전설비를 효과적으로 검출하는 방법을 제안한다. 객체 인식 모델에 송전탑 데이터 셋을 학습시켜 송전설비 Region of Interest(ROI)를 추출한다. 송전선 데이터 셋을 ResNet50 에 학습하고, 추출된 ROI 영상을 Guided Grad-CAM 을 출력한다. 추출된 Guided Grad-CAM 에 노이즈 제거 후처리를 적용하여 송전설비를 추출한다. 본 논문에서 제안된 기법을 적용할 경우 드론 또는 UAV 헬기 등에서 촬영된 영상으로 송전설비 유지보수가 가능하다.