• Korean Journal of Applied Biomechanics
• /
• v.21 no.4
• /
• pp.411-420
• /
• 2011

The purpose of this investigation was to determine whether correlations exist between balance and impact velocity, angular position, and maximum velocity of a club during drive swing. Twelve skilled golfers were recruited in this study. They were asked to perform ten swing trials and two trials were selected for analysis. Balance parameters were calculated via the force platform while kinematic variables were determined by using the Qualisys system. The results of the present study demonstrated that the average of COP velocity was faster in the medio-lateral direction rather than the anterio-posterior direction. Also, left foot's COP velocity and free torque were greater than the right foot's before impact. The range of the right foot's COP in the anterio-posterior direction before impact were correlated with the club velocity and angular position at impact. There was a negative correlation between the left foot's COP velocity before the impact and the velocity at impact. Additionally, the range and RMS of the left foot's free torque affected on the club angular position at impact and the maximum velocity at release, respectively. Finally, a negative correlation existed between the range of the right foot's free torque after the impact and club's maximum velocity at release.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.194.2-194.2
• /
• 2005

• The Korean Journal of Ecology
• /
• v.28 no.5
• /
• pp.261-264
• /
• 2005

In the current study, we examined the quality of surface water in ponds at two golf courses, located in southern (Country Club P) and eastern (Country Club B) areas of Korea respectively. Seasonal measurements were made of following physical parameters;pH, dissolved oxygen, biological oxygen demand, chloride, alkalinity, hardness, and nitrogen compounds [$NH_3$-N, $NO_2$-N, $NO_3$-N] and the concentrations of four heavy metals (Cd, Cu, Pb, and Zn) throughout the courses. The pH values were within the alkaline range (7.3 to 9.0), and the biological oxygen demand was generally between 0.5 and 3.1 mg/L. The alkalinity and hardness ranged from 19.1 to 68.5mg/L and 16.1 to 63.6 mg/L, respectively. Nitrogen as ammonium $(NH_3-N)$ was detected in all samples, and the samples had low concentrations of $NO_2-N$ and $NO_3-N$. Cd concentrations were relatively high (to 22.44 mg/L); the highest Cd concentration was observed in the pond in Country Club P. Other metal concentrations were low compared to the Quebec guidelines.

• Composites Research
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2007

This study presents a methodology for optimization of static characteristics of golf club shafts. Stacking sequence for the optimal composite shaft performance is searched. A new objective function is defined for the simultaneous optimization of flexural and torsional stiffnesses. Classical lamination theory is used for the static analysis. As the optimization tool, genetic algorithm is applied with the stacking sequence as design. variables. With the optimal stacking sequence, dynamic characteristics of the shaft is also studied.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.79-94
• /
• 2005

Because the golf swing is very complex movement, it is varied in different gender, skill level, and club. This study measured kinematic variables in golf swing regarding gender, skill level, and club types using FasTrak electromagnetic tracking system. Golf swing kinematics including time variables, linear and angular displacement variables, angular velocity variables were analyzed and compared through three-way ANOVA The results were as follows: 1. In time variables, Female and driver showed longer backswing time than male and iron. Downswing time was longer in female and nonexperts than male and experts. Backswing time over downswing time was longer in experts than nonexperts. Uncocking time was longer in male and experts than female and nonexperts. The differences were statistically significant (p<.05). 2. In displacement variables, Female and nonexperts showed greater backswing head lift than male and experts. Impact head lift was greater in female, nonexperts, and iron than male, experts, and driver. The differences were statistically significant (p<.05). Experts and driver showed greater top hip rotation angle than nonexperts and iron. Top shoulder rotation angle was greater in male, experts and driver than female, nonexperts, and iron. X-factor was greater in male, experts, and driver than female, nonexperts, and iron. Male and experts showed greater backswing hip sway than female and nonexperts. Impact hip sway was greater in male and iron than female and driver. The differences were statistically significant (p<.05). 3. In velocity variables, Experts displayed higher impact hip rotation velocity than nonexperts. Impact shoulder rotation velocity was greater in male and iron than female and driver (p<.05).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.595-598
• /
• 2005

The impact sound of the golf club is one of the major factors to purchase it. Sound qualify evaluation techniques are mostly developed for harmonic sounds. Sound quality metrics for the impact sound is proposed in this study. Jury test, one of the typical subjective evaluation scheme, is carried out for evaluating the sound quality of 11 different golf drivers. Above subjective classification results are assumed to be the right answers. Conventional objective evaluation methods such as Zwicker loudness sensory pleasantness are calculated. Wavelet analysis and instantaneous loudness are applied in order to evaluate the transient sounds, which shows better correlation with the results from those by jury test.

• Asian Journal of Turfgrass Science
• /
• v.8 no.1
• /
• pp.25-28
• /
• 1994

Chemical characteristics of soils were investigated in three golf courses of Kwanak, Gold and Korea Country Club with different open year. The soil samples were collected in tee, fairway and rough. There were ranges of 4.80~5.55 in pH, 3.68~5.39% inorganic matter, 0.10~0.25% in total nitrogen, 5.63~45.64ppm in available phosphorus, 0.80~1.7lme /l00g in exchangeable Ca, 0.09~0 42me /l00g in exchangeable Mg, 0.03~0.O9me /l00g in exchangeable Na, and 0.06~0.l4me /l00g in exchangeable K. The pH was significant with golf club(P<0.05) and positively correlated with exchangeable Ca and exchangeable Mg(P<0.0l).

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.44-47
• /
• 2002

A liner static and dynamic analysis for a golf shaft, which is made of carbon fiber reinforced composite materials, is presented in this study. Major mechanical parameters of golf shafts such as deflection, torsional angel, frequency of vibration(CPM), and kick point are analyzed by finite element method. The effects of major parameters on the performance of golf shafts are also discussed. The results show that the major parameters of golf shafts are strongly dependent on the material properties of fibers and design pattern of golf shafts. The present results will be useful to design sheet-rolled golf shafts.

• Asian Journal of Turfgrass Science
• /
• v.23 no.1
• /
• pp.45-60
• /
• 2009

Occurrence ecology and possibility of mass trapping of Popillia quadriguttata, one of the most serious turfgrass insect pest in domestic golf courses was investigated using pheromone traps in Gimpo and Jinhae. Peak period of adult occurrence of P. quadriguttata was late June and early July in Gimpo Seaside Country Club from 2006 to 2008. It was early and middle July in Youngwon Country Club in 2006. The first catched day of P. quadriguttata adult was 20 June, while the last day was 10 September in Gimpo Seaside Country Club, 2006. Mean catched number of P. quadriguttata adult in Japanese beetle pheromone trap per day in peak period of occurrence were 18.2, 25.7, 29.0, and 15.7 at 2005, 2006, 2007 and 2008 respectively. Mean catched number of P. quadriguttata adult in Japanese beetle pheromone trap were more in fairways or roughs than tees or greens. Possibility of control of scarab beetle using pheromone trap with pesticide treatment was investigated against oriental beetle, Blitopertha orientalis in Dongrae Benest Golf Club. Mean number of dead oriental beetle adult were more higher(2.9 folds) in fenitrothion EC treatment than fenitrothion EC treatment after set oriental beetle pheromone trap.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.95-104
• /
• 2005

To know the proper setup posture for the various clubs, changes of setup variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed videocameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. The variables divided into three categories 1) position and width of anterior-posterior direction 2) position and width of lateral direction 3) angles and evaluated based on the theories of many good golf teachers. Major findings of this study were as follows. 1.The stance (distance between ankle joints) was increased as the length of the club increased but the increasing width was not large. It ranges from 5cm to 10cm and professional player showed small changes. 2. Forward lean angle of trunk was decreased (more erected) as the length of the club increased. It ranges from 30 degrees for iron7 to 25 degrees for driver. 3. Angle between horizontal and right shoulder were increased as the length of the club increased. It ranges from 10 degrees to 20 degrees and professional player showed small changes. 4. Anterior-posterior position of the shoulders were located in front of the foot for all clubs and the difference between the shoulder and knee position was decreased as the length of the club increased. 5. Anterior-posterior position of grip (hand) was located almost beneath the shoulders (2.5cm front) for iron7, but it increased to 10cm for the driver. This grip adjustment makes the height of the posture increased only 5cm from iron7 to driver. 6. Lateral position of grip located at 5cm left for the face of iron7, but it located at the right side (behind) for the face of driver. 7. Lateral position of the ball located at the 40%(15cm) of stance from left ankle for iron7 and located at the 10% (5cm) of stance for driver. 8. Head always located at the right side of the stance and the midpoint of the eyes located at the 37% of stance from the right ankle for all clubs. This means that the axis of swing always maintained consistently for all clubs. 9. Left foot opened to the target for all subject and clubs. The maximum open angle was 25 degrees. Overall result shows that the changes of the setup variables vary only small ranges from iron7 to driver. Paradoxically it could be concluded that the failure of swing result from the excessive changes of setup not from the incorrect changes. These findings will be useful for evaluating the setup motion of golf swing and helpful to most golfers.