• KSBB Journal
• /
• 제15권5호
• /
• pp.497-500
• /
• 2000

Avidin의 금속표변에 대한 강한 결합력과 avidin-biotin의 강한 결합력을 이용하여 금속 표면 위에 라포좀과 같은 유기 분자막의 다층 형성 과정을 수정진동자를 이용하여 분석하였다. 금속 표변위에 적층되는 유기 분자막에 대한 정보를 수 집하고 그 가능성을 검토하여 바이오 센서에서 감도를 향상 시킬 수 있는 새로운 방법을 제시하고자 하였다.

• Bulletin of the Korean Chemical Society
• /
• 제22권7호
• /
• pp.748-752
• /
• 2001

Alkanethiols (CH3(CH2)n-1SH) based self-assembled monolayers (SAMs) on the clean copper surfaces have been examined for n = 4, 8, and 16. Using X-ray photoelectron spectroscopy (XPS) and contact angle analysis, it is found that alkanethiolate monolayers similar to those on gold are formed on clean copper surfaces. The monolayers are stable in air up to about 140 $^{\circ}C.$ Above 160 $^{\circ}C$ the monolayers begin to desorb through the oxidation reaction of the thiolate to sulfonate, with the alkyl chains remaining intact. Following this desorption step, the copper surface has begun to oxidize to CuO at about 180 $^{\circ}C$.

• 대한치과보철학회지
• /
• 제45권2호
• /
• pp.203-215
• /
• 2007

Statement of problem: Titanium and its alloy, with their excellent bio-compatibility and above average resistance to corrosion, have been widely used in the field of dentistry. However, the excessive oxidization of titanium which occurs during the process of firing on porcelain makes the bonding of titanium and porcelain more difficult than that of the conventional metal-porcelain bonding. To solve this problem related to titanium-porcelain bonding, several methods which modify the surfaces, coat the surfaces of titanium with various pure metals and ceramics, to enable the porcelain adhesive by limiting the diffusion of oxygen and forming the adhesive oxides surfaces, have been investigated. Purpose: The purpose of this study was to know whether the titanium-porcelain bonding strength could be enhanced by treating the titanium surface with gold and TiN followed by fabrication of clinically applicable porcelain-fused-to-titanium crown Material and method: The porcelain-fused-to-titanium crown was fabricated after sandblasting the surface of the casting titanium coping with $Al_2O_3$ and treating the surface with gold and TiN coating followed by condensation and firing of ultra-low fusing porcelain. To compare with porcelain-fused-to-titanium crowns, porcelain-fused-to-gold crowns were fabricated and used as control groups. The bonding strengths of porcelain-fused-to-gold crowns and porcelain-fused-totitanium crowns were set for comparison when the porcelain was fractured on purpose to get the experimental value of fracture strength. Then, the surface were examined by SEM and each fracturing pattern were compared with each other Result:Those results are as follows. 1. The highest value of fracture strength of porcelain-fused-to-titanium crowns was in the order of group with gold coating, group with TiN coating, group with $Al_2O_3$ sandblasting. No statistically significant difference was found among the three (P>.05). 2. The porcelain-fused-to-gold crowns showed the highest value in bonding strength. The bonding strength of crowns porcelain-fused-to-titanium crowns of rest groups showed bonding strength reaching only 85%-94% of that of PFG, though simple comparision seemed unacceptable due to the difference in materials used. 3. The fracturing patterns between metal and porcelain showed mixed type of failure behavior including cohesive failure and adhesive failure as a similar patterns by examination with the naked eye and SEM. But porcelain-fused-to-gold crowns showed high incidence of adhesive failure and porcelain-fused-to-titanium crowns showed high incidence of cohesive failure. Conclusion: Above results proved that when fabricating porcelain-fused-to-titanium crowns, treating casting titanium surface with gold or TiN was able to enhance the bonding strength between titanium and porcelain. Mean value of masticatory force was found to showed clinically acceptable values in porcelain bonding strength in all three groups. However, more experimental studies and evaluations should be done in order to get better porcelain bonding strength and various surface coating methods that can be applied on titanium surface with ease.

• 전기화학회지
• /
• 제12권1호
• /
• pp.40-46
• /
• 2009

실리콘 표면을 전기화학적으로 활성화하여 활성화된 표면에만 선택적으로 단백질이나 나노입자 등의 기능성 물질을 고정화하는 방법을 개발하였다. 이를 위해 Carboxymethylbenzendiazonium (CMBD) 양이온을 전기화학적 환원반응을 통해 고정하여 실리콘 표면을 활성화하는 방식을 선택하였다. 그리고 활성화 된 표면에서만 기능성 물질이 고정된 것을 확인함을 통하여 CMBD 양이온의 사용이 선택적 고정화에 매우 효과적임을 보였다. 나아가 이 방법을 응용하여 실리콘 나노소자에 탑재된 실리콘 나노선 어레이 중 선택된 나노선의 표면만을 활성화하고 금 나노입자를 선택적으로 고정하는 연구를 수행하였다.

• 한국표면공학회지
• /
• 제50권3호
• /
• pp.170-176
• /
• 2017

EPIG (Electroless Pd/immersion Au) process was studied to replace ENIG (electroless Ni/immersion Au) and ENEPIG (electroless Ni/electroless Pd/immersion Au) processes for bump surface treatment used in high reliable flip chip packages. The palladium and gold layers formed by EPIG process were uniform with thickness of 125 nm and 34.5 nm, respectively. EPAG (Electroless Pd/autocatalytic Au) also produced even layers of palladium and gold with the thickness of 115 nm and 100 nm. TEM results exhibited that the gold layer in EPIG surface had crystalline structure while the palladium layer was amorphous one. After annealing at 250 nm, XPS analysis indicated that the palladium layer with thickness more than 22~33 nm could act as a diffusion barrier of copper interconnects. As a result of comparing the chip shear strength obtained from ENIG and EPIG surfaces, it was confirmed that the bonding strength was similar each other as 12.337 kg and 12.330 kg, respectively.

• 대한치과기공학회지
• /
• 제31권1호
• /
• pp.63-74
• /
• 2009

Partial or complete prosthesis is needed when teeth are lost due to various kinds of reason. Artificial teeth recover occlusion instead of natural teeth. Artificial teeth are required of esthetics, fragile resistance and abrasive resistance. Artificial tooth is made of acrylic resin or porcelain. Nowadays, acrylic resin artificial teeth are mainly used. Acrylic resin teeth are occluded with natural teeth, gold alloy, Ni-Cr alloy or porcelain etc. Acrylic resin teeth have similar translucency, gloss of natural teeth. And it has good chemical bond with denture base material, but it has low wear resistance. The aim of this study is to compare wear resistance among several denture teeth(Endura, SR-orthosit-PE, Planustar) and between artificial resin denture teeth and opposing 3 restorative materials(gold, Ni-Cr alloy, porcelain). Wear tests were conducted with a rotating wear testing apparatus(pin-on-disk type wear tester) under conditions of rpm 180, 75 minutes and constant loading of 50N. The upper part was the cusp of maxillary first molar and the lower part was a disk type restorative materials. To make similar oral environment, water was supplied continually. The acrylic resin teeth wear was determined by weighing the cusp each 5 minutes during 75 minutes test. Vicker's hardness tester was used to evaluate the surface hardness of test specimens. The SEM was used to evaluate the wear surfaces. The results were as follows: 1. Wear rates of acrylic resin teeth opposing to the restorative materials were high in order of Porcelain, Gold, Ni-Cr alloy (p<.05). 2. Wear resistance rate opposing to the Porcelain disk, was shown in order of Endura, SR-orthosit-PE, Planustar. The wear rate of opposing to porcelain disk was above two times more than that of other groups (p<.05). 3. Wear resistance rates opposing to the Gold, Ni-Cr alloy disk, was shown in order of Endura, SR-orthosit-PE, Planustar (p<.05). 4. A degree of the surface hardness is directly proportional to the degree of wear resistance. There are statistically significant differences between each groups (p<.05).

• Elastomers and Composites
• /
• 제40권4호
• /
• pp.272-276
• /
• 2005

3-aminopropyltrimethoxysilane을 처리한 반응성 있는 유리표면 위에 'dirt-ball' 방법을 사용하여 $C_{70}$-금 나노입자 다중성막 필름을 자기조립하였다. 표면처리한 유리막을 $C_{70}$ 과 ${\omega}$-아미노기를 가진 금 나노입자를 포함하고 있는 용액속에 담그었다. 유기반응(아민화 반응)은 여러층으로 쌓인 다중성막 $C_{70}$-금 나노입자 필름을 용이하게 자기조립 할 수 있었다. $C_{70}$-금 나노입자 필름의 화학적 안정성은 산성용액에 필름을 담근후 흡수도의 변화를 측정함으로 조사되었다. 또한 나노입자 필름의 초음파적 안정성은 초음파 조건에 $C_{70}$-금 나노입자 필름을 노출하여 초음파를 조사 시킨후 고체 표면 위에 부분적인 탈착도의 변화와 작은 정도의 응집성이 일어남을 알 수 있었다.

• 공업화학
• /
• 제30권3호
• /
• pp.308-312
• /
• 2019

양친매성 금입자는 그 표면에 소수성 및 친수성 리간드를 결합시켜 합성된다. 이러한 양친매성 입자들은 바이오, 에너지, 광학, 전자 공학 분야 등에 다양하게 활용될 수 있다. 입자 표면의 소수성/친수성 비율은 양친매성 금입자의 물리화학적 특성과 밀접한 관계가 있어 양친매성 금입자를 활용하는데 있어서 상당히 중요한 역할을 한다. 본 연구에서는 양친매성 금입자 합성 과정(리간드 치환반응)에서 온도 변화에 대한 표면의 소수성과 친수성 리간드 비율의 영향을 알아보았다. 치환 반응의 온도가 증가함에 따라서 표면의 친수성 리간드의 비율이 증가하고, 또한 더 적은 친수성 리간드의 비율에서도 양친매성 금입자가 수용액상에 개별적으로 잘 분산되는 것을 확인하였다.

• Rapid Communication in Photoscience
• /
• 제2권2호
• /
• pp.46-51
• /
• 2013

This study reports a fiber-optic sensor detecting biomolecule by simultaneously monitoring localized surface plasmon resonance (LSPR) from gold nanoparticles (Au NPs) of ca. $50{\pm}5$ nm attached on one end of optical fiber and surface enhanced Raman scattering (SERS) of the reporter molecules adsorbed on the gold surfaces as an additional sensing tool. The sensor was fabricated by immobilizing Au NPs on one end of an optical fiber by chemical reaction. LSPR and SERS signals of the sensor were measured using various refractive indices solutions. Finally, the sensor was applied to observe real-time LSPR sensor-gram and SERS spectra of the reporter molecule of 4-aminothiphenol during the antibody-antigen reaction of interferon-gamma (IFN-${\gamma}$) as a proof-concept experiment of biological applications.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.546-549
• /
• 2000

Avidin-biotin의 강한 결합력을 이용하여 금속 표면 위에 리포좀과 같은 유기 분자막의 다층 형성 과정을 QCA의 공진주파수와 공진저항의 변화를 측정하므로서 실시간 모니터링의 가능성을 검토하고, 유기 분자막이 금속 표면 위에 적층 됨에 따라 형성되는 적층 막에 대한 정보를 수집함으로서 바이오센서 시스템으로 QCA를 적용 가능함의 기초 데이터를 제공하고자 한다.