• 한국산업융합학회 논문집
• /
• 제23권3호
• /
• pp.419-425
• /
• 2020

There are many accident risks in logging operation of forestry such as struck by felled trees and caught in, under, or between felled trees. These accidents are primarily occurred by not keeping a safe distance between workers. According to the forestry safety instruction, workers are not supposed to go into the safety zone which is a circle with a radius of more 2 times the height of felling tree. However, this rule does not keep because of poor safety consciousness, poor sight and extreme noise of logging operation machines. This problem causes many major accidents every year. To solve this problem, we made forestry safety helmets based on IoT technology. These helmets have functions to make a visual and an acoustic alarm signal when reach the distance between workers within 20 meters. We developed the algorithm to operate the helmet's functions and conducted tests to check the functions. As a result of tests, we assured the normal system operating conditions.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제23권2호
• /
• pp.134-139
• /
• 2017

기존의 스크린 미러링 시스템들은 패킷 손실에 취약하며 제한적인 모바일 기기의 에너지를 효율적으로 사용하지 못하는 단점을 가지고 있다. 이를 극복하기 위해 본 연구에서는 패킷 손실에 강인하고 에너지 효율적인 스크린 미러링 시스템을 제안한다. 제안하는 시스템은 패킷 손실로 인한 스크린 미러링 영상의 품질 저하를 완화하기 위해 전방오류정정 기술의 한 종류인 랩터 코드를 적용한다. 그리고 모바일 기기의 효율적인 에너지 사용을 위해 스크린 미러링 데이터에 대한 트래픽 셰이핑을 적용하고, 랩터 인코딩 매개 변수를 조절한다. 제안하는 시스템은 싱글 보드 컴퓨터를 사용하여 실제로 구현 되었으며, WiFi Direct 네트워크 상에서 성능을 검증하였다.

• 한국컴퓨터정보학회논문지
• /
• 제21권3호
• /
• pp.1-8
• /
• 2016

The printed circuit board (PCB) can be used only 2 layers of front and back. Therefore, the wiring line segments are located in 2 layers without crossing each other. In this case, the line segment can be appear in both layers and this line segment is to resolve the crossing problem go through the via. The via minimization problem (VMP) has minimum number of via in layout design problem. The VMP is classified by NP-complete because of the polynomial time algorithm to solve the optimal solution has been unknown yet. This paper suggests polynomial time algorithm that can be solve the optimal solution of VMP. This algorithm transforms n-line segments into vertices, and p-crossing into edges of a graph. Then this graph is partitioned into 3-coloring sets of each vertex in each set independent each other. For 3-coloring sets $C_i$, (i=1,2,3), the $C_1$ is assigned to front F, $C_2$ is back B, and $C_3$ is B-F and connected with via. For the various experimental data, though this algorithm can be require O(np) polynomial time, we obtain the optimal solution for all of data.

• 의료법학
• /
• 제12권2호
• /
• pp.163-187
• /
• 2011

On March 11, 2011, the Korea National Assembly finally passed the bill on the Damage Relief on the Medical Malpractice and Mediation for Medical Dispute. One of the features of this Act is including "The Subrogation Payment System for Damage (abbreviated SPSD)". This System is that 'Korean Medical Dispute Mediation-Arbitration Board' pays the damages, instead of the health care provider, for the patient who isn't paid damages by the health care provider despite of the Mediation or ruling. The purpose of this study is to search the problems and make improvement on SPSD. This System was introduced extreamly to the patients in order to induce them to the mediation. However,there remains several problems. In this articles, I have examined thoroughly the legal issues on SPSD. There are legal issues about the methods and ratio of the financial burden. In this connection, wide discretionary authority has been granted to administrative agencies specifically. On this account, this System clearly contains elements of a violation against the Constitutional Law. Moreover, this System can be broadly applied to the case of court ruling or the Korea Consumer Agency's mediation. But these measures go against the aim of legislation that the medical dispute can be resolved through the mediation or arbitration by this Act. In the end, these problems must be revised through the additional discussion.

• 수산해양기술연구
• /
• 제28권2호
• /
• pp.132-143
• /
• 1992

This paper presents a method in order to calculate the vortex distribution, the streak-line and the time-line around the flat and the cambered otter board in two dimensional flow using the discrete vortex method, and to calculate C sub(L) and C sub(D) of the otter boards varied with the passage of time by the numerical simulation using the Blasu's formula. The results obtained are summarized as follows: 1. Flow pattern around the otter boards calculated by the discrete vortex method was resembled closely that of the visualized photograph. 2. C sub(L) and C sub(D) calculated by the numerical simulation was very similar to the model test. 3. The circulation direction around the otter boards and the action direction of the shearing force can be recognized from the time-line around the otter boards. 4. Flow speed in the back side of the otter boards was faster than that in the front side, and the difference of the flow speed in both side of the cambered otter boards was about 1.3 times greater than that of the flat otter boards. 5. The clockwise vortex was generated in the trailing edge, and the counter-clockwise vortex was generated the leading edge of the otter boards. And they were shown the shape of Karman's vortex varied with the passage of time.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.287-288
• /
• 2010

The Induction Heating equipment is widely used for steel plate heating in the surface treatment process of steel industries. In the case of thin steel plate, for high efficiency We need the high frequency induction heating equipment more than 100kHz. But it is difficult to realize the high frequency and high power at the same time. That's why most high frequency equipment more than 100kHz has been imported from advanced Manufacturer. This paper will describe the development of 100kHz/5MVA inverter module for 100kHz/20MVA induction heating. We used the LCL resonance topology and ZVS/ZCS switching technology. And we also developed the low loss gate drive board and plate busbar inverter stack. We proved the performance by various experiment.

• 선박안전
• /
• 통권23호
• /
• pp.78-97
• /
• 2007

SPM, which is an abbreviation of Single Point Mooring, also called as SBM(Single Buoy Mooring), is a special buoy besides the quays of the harbor for mooring ships, and is normally a 3m wide cone or cylinder shaped steel drum fixed underwater so it won't move, and is used for mooring cargo-work at outer port by laid-up ships and large crude oil carrier. The work of VLCC SPM mainly is accomplished on the open sea. On the open sea as a result of meteorological condition and the ocean wave influence, When the weather condition is get bed, peremptorily moving to the safety place, because of the gale and the billow, almost happened frequently, the pilot is unable to go on board and the tug is also unable to be used Now because of the bad weather the VLCC SPM moving to the other safety place frequently happened in the ulsan port. the construction of new harbor, it constructed many break water around SPM. So that it is necessary to propose the new standard about how to maneuvering area actually. The standard for handling ranges of the SPM operations was tested and verified by a simulation.. So that it is necessary to propose the new standard about how to maneuvering area actually.

• Physical Therapy Rehabilitation Science
• /
• 제11권4호
• /
• pp.591-597
• /
• 2022

Objective: The sitting and standing are motions that correspond to the previous stage of rehabilitation to go to walking for daily life. The purpose of this study was to measure task times, path length of the center of pressure (COP) and activity on the vastus femoris muscle using surface electromyography (EMG) when standing up and sitting down. Design: One group cross-sectional design Methods: Fifteen elderly subjects (8 male, 7 female) participated. All subjects were tested three times according to four assist levels (non-assist, lower, middle, and maximal assist) using adjusts the length of spring at sit-to-stand and stand to sit on a chair. The task duration, and COP path length were recorded for the balance function on the Nintendo Wii fit board. The activity of the rectus femoris muscle was recorded on both legs using surface EMG. Results: The results showed that the task duration of the sit-to-stand and stand-to-sit were significantly increased compared to without assist (p<.05). The activation of the rectus femoris muscle more significantly decreased compared to without assistance at standing or sitting (p<.05). Conclusions: The assistive chair showed less quadriceps muscle activation during sitting and standing compared to without assistance. We suggest that our assist-standing chair can help with activities of daily living such as standing up and sitting down movements adjusting the spring length for control assist level by safely.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2022년도 제65차 동계학술대회논문집 30권1호
• /
• pp.281-282
• /
• 2022

현재 전동 킥보드 헬멧 미착용으로 인한 사고가 끊임없이 야기되고 있다. 개인형 이동장치 이용자 수가 증가함에 따라 법 개정을 통하여 헬멧 착용이 의무 사항이지만 여전히 낮은 착용률을 나타내고 있다. 본 논문에서는 모든 공유 킥보드 회사에서 사용 가능한 딥러닝 기반의 전동킥보드 헬멧 착용 인식시스템을 제시한다. 타 공유 전동킥보드 회사 앱에서 본 논문의 결과물을 사용할 때는 사용자가 타사 앱에서 헬멧 인식 요청 시 자사 앱에서 헬멧 착용 여부를 인식하여 결과를 전송한다. 자사 앱 사용자는 인식 기록을 조회할 수 있고, 타사 관리자는 사용자의 정보를 조회 및 관리할 수 있다. 본 시스템을 통해 전동킥보드 이용 시 헬멧 착용을 장려하여 착용률 증가와 사고 시 인명피해 감소를 기대한다.

• The Journal of Korean Physical Therapy
• /
• 제35권6호
• /
• pp.200-205
• /
• 2023

Purpose: The purpose of this study is to find out how gait training with shoulder-back assistive device affects dynamic and static balance, gait of patients with stroke and to help improve body alignment, balance, and gait ability in stroke patients. Methods: Measurements were taken of the 20 subjects before intervention without shoulder-back assistive device, after intervention with device, and follow up after an hour compared. Berg balance scale used to evaluate dynamic balance; wii balance board was used to measure static balance; and gait ability were measured by timed up and go test and 10-meter walk test. To analyze the results, a one-way repeated measures analysis of variance was implemented to compare the measurements. Results: The results showed that, after wearing the shoulder-back assistive device, the subjects' dynamic balance statistically significantly improved; no statistically significant difference was observed in static balance, although their balance ability was enhanced; and their increase in gait ability was statistically significant. Conclusion: This study proved that gait training combined with a shoulder-back assistive device positively impacted dynamic and static balance, gait of patients with stroke.