• Journal of the korean society of oceanography
• /
• v.34 no.3
• /
• pp.179-183
• /
• 1999

A light-weight multiple piston corer to meet increasing coring needs in areas where R/V access is limited, is designed and discussed. Hydraulically-damped and spring-driven piston system not only virtually undisturbed surface sediments but also facilitate the recovery and subsequent operation including pore water extraction and core slicing on board the ship. It is designed as compact, light-weight and easy to dissemble that whole gear can be carried by small passenger vehicle yet it permits thick-walled core tube for thermal insulation or large opening core tubes. Because single spring instead of heavy weights of conventional gravity-driven multiple corers is used, this device is very simple and cheap to construct.

• Journal of architectural history
• /
• v.31 no.3
• /
• pp.17-30
• /
• 2022

Jangchungdan is located at the skirt of Namsan near Namsomundongcheon, so the buildings are arranged with many podiums. The steps for people to go up and down such podiums are placed around the buildings. The Western-style constructional methods and materials introduced by the opening of ports were used for a variety of Jangchungdan buildings with differentiated levels of podiums, for Jangchungdan memorial ceremonies, and other building materials were also installed along with the changes in clothes and lifestyles. Although Dansa was constructed in the Chinese style, it reflected the shrine plane used in Joseon Dynasty, which in turn is thought to reflect Gubonsincham, the basic concept of Gwangmu Reform, as in the case of Jangchungdan memorial ceremonies.

• Therapeutic Science for Rehabilitation
• /
• v.1 no.1
• /
• pp.17-28
• /
• 2012

Objective : The purpose of this study is to assess effects of task oriented programme on balance and upper extremity function in stroke patient. Methods : The subject is right hemiplegia with stroke and participated for 6 weeks. The design of study ABA designed of single subject research. The baseline phase consisted of 5 sessions. The intervention phase consisted of 15 sessions and performed task oriented training. The Maintenance phase consisted of 5 sessions. An assessment of upper extremity function was made using a Manual Function Test(MFT) and balance were assessed by the Time Up and Go test(TUG), Nintendo Wii Balance Board Test. Results : Dynamic balance improved from 51.53 to 42.62. At baseline, difference between left and right of the static balance was an average of 13.8, After treatment, the static balance difference was 6.29 and It was closer to zero than baseline, so static balance has been stable feature. Also, MFT point increased from 6 to 7.6. Conclusion : Task oriented programme can useful in balance and upper extremity function in stroke patient. Further studies need to generalize these findings.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.2
• /
• pp.62-68
• /
• 2016

Laser distance measuring systems are used in many fields with high precision. However, when measuring the reflector such as the mirror and the black color, a laser distance measuring system does not guarantee the measurement accuracy. In order to measure the shape of the cargo, this study proposes the radar distance measurement system. The radar distance measuring system is composed of a distance measuring unit with a 24 GHz antenna module, a signal processing and control board and the 1-axis tilting unit. And, this study developed a monitoring program to monitor the measured data. In order to evaluate performance of the developed system, the distance measurement tests are carried out. The distance error was about 6-15 cm. However, considering the size of the cargo, the precision is not a problem. And, cargo shape was measured by using the distance information measured by the 1-axis tilting unit. It could get a 2 dimension shape profile for the cargo stacked in a yard.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.263-269
• /
• 2010

This paper describes real-time detection and tracking of moving objects for unmanned visual surveillance. Using images obtained from the fixed camera it detects moving objects within the image and tracks them with displaying rectangle boxes enclosing the objects. Tracking method is implemented on an embedded system which consists of TI DSK645.5 kit and the FPGA board connected on the DSP kit. The DSP kit processes image processing algorithms for detection and tracking of moving objects. The FPGA board designed for image acquisition and display reads the image line-by-line and sends the image data to DSP processor, and also sends the processed data to VGA monitor by DMA data transfer. Experimental results show that the tracking of moving objects is working satisfactorily. The tracking speed is 30 frames/sec with 320x240 image resolution.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.1
• /
• pp.24-30
• /
• 2019

The deck floor of a the cargo truck becomesis damaged and aged due to the continuous loading of the loading cargo and external environmental factors. Floor boards made of wood and metal are often used. In the case of wood, the cost is high due to the use of imported wood, and the strength is easily deterioratesd due to environmental factors. In the case of metal materials, the durability is higher than that of wood, but problems are raised due to the effect of major factors that hinder the weight reduction, and the effects of corrosion. In order to replace this stucturestructural design, this study proposed a wood fiber composite using natural raw materials. Woody composites are being used as environmentally and friendly exterior materials with the combined advantages of plastic, and wood,; low cost and low density. However, due to the nature of the woody composites, the properties are differentdiffer depending on the contents of the matrix, reinforcing agent, additives, compatibilizer, etc. In this study, we investigate these problems through analysis of the microstructure and mechanical properties according to proper content and injection molding conditions. As a result, it is considered that the wood deck composite can replaced the current Deck Floor Boardreplace current deck floor boards through continuous continued research and results of this study.

• Journal of the Korea Convergence Society
• /
• v.9 no.5
• /
• pp.21-26
• /
• 2018

In this study, HRD-NET (http://hrd.go.kr), a vocational and training integrated computer network operated by the Ministry of Employment and Labor, is used to confirm whether job training information required by job seekers is being provided smoothly The question bulletin board was extracted using 'R' program which is optimized for big data technique. Therefore, the effectiveness, appropriateness, visualization, frequency analysis and association analysis of the vocational training system were conducted through this, The results of the study are as follows. First, the issue of vocational training card, video viewing, certificate issue, registration error, Second, management and processing procedures of learning cards for tomorrow 's learning cards are complicated and difficult. In addition, it was analyzed that the training cost system and the refund structure differentiated according to the training occupation, the process, and the training institution in the course of the training. Based on this paper, we will study not only the training system of the Ministry of Employment and Labor but also the improvement of the various training computer system of the government department through the analysis of big data.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.3
• /
• pp.90-95
• /
• 2015

This study presents a method to test quite small-sized and light-weighted micro-drill bits which are used to make holes in printed circuit boards(PCB). After getting images of micro-drill bits through the high resolution microscope, we developed image processing algorithms to detect fiducial points, and then measured diverse factors of the drill-bit based on these points. We also developed the window-based inspection system to automatically discriminate normal and abnormal status. For the relative comparison of its performance, the system was compared with an existing inspection system using test images. Experimental results showed that the proposed system slightly improved performance, and also classified correctly some misjudged errors which were occurred in the existing system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.6
• /
• pp.618-638
• /
• 2020

An unmanned aerial vehicle(UAV) refers to an aircraft that has all or part of its functions to autonomously fly by grasping the surrounding environment by remote control on the ground without a pilot on board. With the development of unmanned aerial technology, civil/military forces are developing unmanned aerial vehicles for various purposes. In order to control unmanned aerial vehicles from the ground, communication protocols between unmanned aerial vehicles and ground control equipment are required, and civil/military forces have developed and used a photocall for different purposes. In this study, the characteristics of the MAVLink protocol used in the private sector and the STANAG 4586 protocol used in the military are compared/analyzed in detail to find elements to complement each other and to draw improvement measures for protocol unification.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.288-290
• /
• 2010

국산자동차의 품질이 비약적으로 발전하였으나, 주행시나 정차시의 정숙성은 세계최고의 자동차에 비해서는 여전히 취약한 실정이며, 특히 자동차 트렁크에서 발생한 소음과 자동차 하체에서 발생한 소음이 트렁크를 타고 내부에 전달되는 문제가 발생되어 그 해결책이 요구되고 있다. 본 연구에서는 흡 차음이 높은 자동차 트렁크 매트를 개발하는데 목적이 있다. 연구방법으로는 공동연구기업에서 제공한 완제품 형식의 자동차 트렁크 시트와 성형하기 전에 플라스틱판(Board)과 부직포를 이용하여 트렁크 매트의 흡음 및 차음성능을 테스트하였으며, 부직포와 시트의 면밀도를 증가시켜 흡음률과 투과손실의 변화를 살펴보았다. 흡 차음 성능이 높은 자동차트렁크 매트를 개발하기 위하여 부직포와 시트 사이에 다공층을 형성하는 설계를 통하여 매트를 제작하였으며, 개발된 매트의 흡/차음성의 변화를 살펴본 결과 흡음률과 차음도가 기존 제품보다 우수한 것을 확인하였다.