• 분석과학
• /
• 제15권6호
• /
• pp.514-520
• /
• 2002

효율적인 시료의 분석을 위하여 개선된 전열증기화 속빈음극관 글로우 방전 우너자방출분광 장치를 제작하여 그에 대한 기초 연구를 수행하였다. 본 시스템은 개선된 속빈음극관 글로우 방잔에 개선된 전열증기화법을 이용한 샘플주입방법을 응용하였으며, ${\mu}{\ell}$단위의 적은 양으로도 분석가능하도록 순수한 텅스템 재질로 된 나선형 코일을 제작하여 증기화 효율을 최대한 높일수 있도록 하여 글로우 방전으로 최대한 많은 양이 주입될 수 있도록 개선하였다. 최적화된 분석조건을 위한 방전조건으로 시료운반기체 사용량과 방전 전력을 측정하였으며, 그 전에 글로우 방전셀의 냉각장치 및 내부의 구조적인 문제 여부에 따른 방출세기에 미치는 영향과 측정 정밀도를 관찰하였다. 방출되어 발생된 빛은 광전송용 광파이버에 의하여 효율적으로 검출기에 운반되도록 구성 제작하였으며, 마지막으로 본 연구결과에 의한 직선성을 관찰하였다.

• 원예과학기술지
• /
• 제32권6호
• /
• pp.794-802
• /
• 2014

본 연구는 프리지아 '이본느'를 가지고 매일 오후 5시에서 8시까지 150일 동안 LED(청색, 녹색, 적색, 청색:녹색:적색 혼합)광과 백열등, 메탈할라이드등으로 보광을 함으로써, 꽃눈분화 이후부터 개화가 완전히 종료될 때까지 광질에 따른 장일처리가 프리지아의 생육 및 개화에 미치는 영향을 알아보기 위하여 수행되었다. 엽분열기부터 화뢰형성기까지 초장은 광원별 장일처리에 의해 큰 변화는 없었고 엽수는 메탈할라이드등 처리에서 감소하는 경향이었으나 화뢰 발달기 때 엽 내 엽록소 함량은 메탈할라이드등에서 가장 높았다. LED 청색광과 녹색광에서 개화기가 빨랐는데 특히 녹색광 처리에서 가장 빨라 무처리와 메탈할라이드등에 비해 6-8일 정도 단축되었다. 포장 내 개화기간은 LED 적색광에서 가장 짧아 일시 수확에는 효과적이었다. 메탈할라이드 등에서 절화중, 소화의 길이와 폭 등 절화특성이 우수하였다. 구근의 특성을 조사한 결과 LED 적색광에서는 구폭과 구중이, 백열등 처리에서는 구고와 구중이 감소하였고, 구근 내 전분함량은 모든 시험구 사이에 특별한 차이가 없었다. 결과적으로 개화촉진은 LED 녹색등에서 효과적이었고 개화품질은 메탈할라이드등 처리에서 우수하였다.

• 열처리공학회지
• /
• 제23권3호
• /
• pp.150-155
• /
• 2010

Generally, plasma nitriding process has composed with a nitriding layer within glow discharge region occurred by energy exchange. The dissociations of nitrogen molecules are very difficult to make neutral atoms or ionic nitrogen species via glow discharge area. However, the captured electrons in which a double-folded screen with same potential cathode can stimulate and come out some single atoms or activated ionic species. It was showed an important thing that is called "hat is a dominant component in this nitriding process?" in plasma nitriding process and it can take an effective species for without compound layer. During a plasma nitriding process, it was able to estimate with analyzing and identification by optical emission spectroscopy (OES) study. And then we can make comparative studies on the nitrogen transfer with plasma nitriding and ATONA process using plasma diagnosis and metallurgical observation. From these observations, we can understand role of active species of nitrogen, like N, $N^+$, ${N_2}^+$, ${N_2}^*$ and $NH_x$-radical, in bulk plasma of each process. And the same time, during DC plasma nitriding and other processes, the species of FeN atom or any ionic nitride species were not detected by OES analyzing.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
• /
• pp.22-25
• /
• 2006

Long lasting phosphor materials are in great demand for their applications in the area of light emitting diodes (LEDs), commercial displays and warning signals. After glow longevity, brightness, photo-resistance and chemical and environment stability are most important qualities that are desired for these materials. Alumina as host lattice with various rare earth elements has been found to be good at the same time inexpensive material for the synthesis of the phosphor materials. This communication explored the effect of mixed rare earth metal on the luminescence properties of these materials for the first time. Various permutations and combinations of $Sr^{2+}$ and $Ba^{2+}$ have been investigated in order to achieve robust and high luminescence characteristics in the tailored phosphor materials.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.145-150
• /
• 2003

Polypropylene nonwoven fabrics were exposed to He/$O_2$ atmospheric pressure glow discharge plasma. Surface chemical analysis and contact angle measurement revealed the surface oxidation by formation of new functional groups after plasma treatment. Weight loss (%) measurement and scanning electron microscopy analysis showed a significant plasma etching effect. It was investigated in low-stress mechanical properties of the fabrics using Kawabata Evaluation System (KES-FB). The surface morphology change by plasma treatment increased surface friction due to an enhancement of fiber-to-fiber friction, resulting in change of other low-stress mechanical properties of fabric.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.42-48
• /
• 1999

An experimental study was performed to discover the effect of environment on the tribological behavior of Si-incorporated diamond-like carbon(Si-DLC) film slid on a steel ball. The films were deposited on Si(100) wafers from radio-frequency glow discharge of mixtures of benzene and dilute silane gases. Experiments using a ball-on-disk test-rig was performed under vacuum, dry air and ambient air conditions. It was observed that coefficient of friction was decreased as the environmental condition changes from vacuum, to dry air. It was also observed that the coefficient of friction decreased with increasing silicon concentration in the film. Chemical analyses of debris suggested that the low and stable friction coefficient is closely related to the silicon rich oxide debris and the rolling action.

• Tribology and Lubricants
• /
• 제16권3호
• /
• pp.188-193
• /
• 2000

An experimental study was performed to discover the effect of environment on the tribological behavior of Si-incorporated diamond-like carbon(Si-DLC) film slid on a steel ball. The films were deposited on Si(100) wafers by a radio-frequency glow discharge of mixtures of benzene and dilute silane gases. Experiments using a ball-on-disk test-rig was performed in vacuum, dry air and ambient air conditions. It was observed that coefficient of friction decreased as the environment changed from vacuum, to dry air. Chemical analyses of debris suggested that low and stable friction is closely related to the formation of silicon-rich oxide debris and the rolling action.

• 한국염색가공학회지
• /
• 제1권1호
• /
• pp.7-18
• /
• 1989

The distinguishing characteristic of the glow discharge is that chemical reaction induced by partially ionized gases are limited only to the substrate surface. Most studies have been done on the plasma etching and polymerization. The graft polymerization in vapour phase by cold plasma has been rarely investigated. In this study the system of tub3ar reaction chamber with capacitively coupled electrode of alternative current of 60 Hz was employed for the graft polymerization. The graft polymerization of Acylic Acid(AA) onto the poly (ethylene terephthalate) (PET) was carried out by treatment of PET film and fabric by cold plasma (glow discharge of argon gas), followed by the supply of AA vapour. The graft yield was about 1 wt%. The surface property was determined by contact angle, the surface tension was evaluated by zisman’s plot and equation of surface tension mesurement. The results were as follows: 1. In order to obtain lower contact angle, it was effective to avoid the vicinity of electrodes for a setting position of substrate. 2. Contact angle affected on the monomer pressure and its duration of exposure to the acid vapour. 3. Polymer radical formation was influenced by the changes of the value of current density and plasma treatment time. 4. Total surface tension of plasma grafted PET film increased. With an increase in the carboxylic acid content, the dispersion force decreased, while, the polar force and hydrogen bonding force increased. 5. The contact angle decreased from $75^\circ$ to around $30^\circ$ by plasma grafting. There was no ageing effect on the contact angle after 4 months.

• 열처리공학회지
• /
• 제23권1호
• /
• pp.23-28
• /
• 2010

The cylindrical magnetron sputtering has not been widely used, although this system is useful for only certain types of applications such as fiber coatings. This paper presents electrode configurations which improved the complicacy of the target assembly by using the positive voltage power supply. It is a modified type which has a target constructed with a large cylindrical part, a conical part and a small cylindrical part. When positive voltage was applied to an anode, a stable glow discharge was established and a high deposition rate was obtained. The substrate bias current was monitored to estimate the effect of ion bombardment. As a result, it was found that the substrate current was large. With cylindrical and conical cathode magnetron sputter deposition on the surface of the substrate to prevent re-sputtering, ion impact because it can increase the effectiveness with excellent ductility and adhesion of Ti film deposition can be obtained. We board at the front end of the ground resistance of $5\;k{\Omega}$ attached to the substrate potential can be controlled easily, and Ti film deposition with excellent adhesion can be obtained. Microstructure and morphology of Ti films deposited on pure Cu wires were investigated by scanning electron microscopy in relation to preparation conditions. High level ion bombardment was found to be effective in obtaining a good adhesion for Cu wire coatings.

• 자원리싸이클링
• /
• 제21권2호
• /
• pp.59-65
• /
• 2012

본 연구는 전자산업용 탄탈럼 스크랩의 재활용을 위하여 전자빔 용해에 의한 정련 효과를 조사 하였고 정련된 탄탈럼의 극미량 불순물은 글로방전 질량분석기를 이용하여 분석하였다. 탄탈럼 내 대부분의 불순물은 전자빔 용해에 의하여 수 ppm 수준으로 제거되어 초기 탄탈럼 스크랩의 순도인 4 N(99.996%)급에서 5 N(99.9991%)급으로 향상되었다. 탄탈럼 내 금속 불순물의 경우 초기 30 ppm에서 전자빔 반복 용해에 의해 8 ppm으로 감소된 것을 확인하였다. 또한 탄탈럼 내 가스 불순물의 경우 초기 470 ppm에서 전자빔 반복 용해에 의해 50 ppm으로 크게 감소하였다. 본 연구 결과를 통하여 탄탈럼 스크랩에 있어서 전자빔 용해에 의한 재활용 가능성 및 반복 용해에 의한 정련 효과를 확인하였다.