• Journal of Global Scholars of Marketing Science
• /
• v.16 no.1
• /
• pp.13-26
• /
• 2006

In this research, we develope a procedure for detecting a random non-stationarity to the individual's purchasing rate in a stationary NED model. On this purpose, we derive the likelihood ratio statistic for a testing null and alternative hypotheses defined as whether there is no significant structural change in a stationary NED model or any. Where the structural change comes from a random non-stationarity(marketing mix activities or seasonality, for example) to the individual's purchasing rate. We also apply the developed method to a panel data for a frequently purchased good. This research could be a solution to include the non-stationarity in a stationary NED model. We also expect that the developed model could give a signal for an early detection of significant changes in marketing environment, and a mean for a measurement of the effects of marketing mix activities.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.766-778
• /
• 2013

The depletion of natural resources and renewable energy sources, such as photovoltaic (PV) energy, has been highlighted for global energy solution. The PV power control unit in the PV power-generation technology requires a high step-up DC-DC converter. The conventional step-up DC-DC converter has low efficiency and limited step-up ratio. To overcome these problems, a novel high step-up DC-DC converter using an isolated switched capacitor cell is proposed. The step-up converter uses the proposed transformer and employs the switched-capacitor cell to enable integration with the boost inductor. The output of the boost converter and isolated switched-capacitor cell are connected in series to obtain high step-up with low turn-on ratio. A hardware prototype with 30 V to 40 V input voltage and 340 V output voltage is implemented to verify the performance of the proposed converter. As an extended version, another novel high step-up isolated switched-capacitor single-ended DC-DC converter integrated with a tapped-inductor (TI) boost converter is proposed. The TI boost converter and isolated-switched-capacitor outputs are connected in series to achieve high step-up. All magnetic components are integrated in a single magnetic core to lower costs. A prototype hardware with 20 V to 40 V input voltage, 340 V output voltage, and 100 W output power is implemented to verify the performance of the proposed converter.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.6
• /
• pp.490-497
• /
• 2008

For continuous operation of the sulfur-iodine(SI) thermochemical cycle, which is expected practical method for massive hydrogen production, suggesting operation conditions at steady state is very important. Especially, in the Bunsen reaction section, the Bunsen reaction as well as side reactions is occurring simultaneously. Therefore, we studied on the relation between the variation of compositions in product solution and side reactions. The experiments for Bunsen reaction were carried out in the temperature range, from 268 to 353 K, and in the $I_2/H_2O$ molar ratio of $0.094{\sim}0.297$ under a continuous flow of $SO_2$ gas. As the result, sulfur formed predominantly with increasing temperature and decreasing $I_2/H_2O$ molar ratios. The molar ratios of $H_2O/H_2SO_4$ and $HI/H_2SO_4$ in global system were decreased as the more side reaction occurred. A side reactions did not appear at $I_2/H_2O$ molar ratios, saturated with $I_2$, irrespective of the temperature change. We concluded that it caused by the increasing stability of an $I_{2x}H^+$ complex and a steric hindrance with increasing $I_2/HI$ molar ratios.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.435-436
• /
• 2008

Dye-sensitized Solar Cells(DSSCs) which convert incident sun light into electricity were expected to overcome global warming and depletion of fossil fuels. And it is one of study that is lately getting into the spotlight because manufacturing method is more simple and inexpensive than existing silicon solar cells. In this respect, DSSCs are in the limelight as the next generation solar cells. DSSCs are generally composed of a dye-modified $TiO_2$ photoelectrode, a Pt counter electrode, and an electrolytes containing a redox couple$(I^-/I_3^-)$. Among these elements, pt electrode were prepared by applying electric potential to FTO substrate in the $H_2PtCl_6$ solution. In this study, we report the solar cell efficiency depending on $PtCl_4$ concentration change. $PtCl_4$ concentration was 1mM, 5mM, 10mM, and 20mM, and adhered on FTO glass substrate by sintering process. When applied each $PtCl_4$ counter electrode on DSSC, the best efficiency was found at 10mM of $PtCl_4$ concentration. The catalyst promotes the movement of electron from the counter electrode to the electrolyte the higher the molarity, the better the efficiency. However, in case of 20mM, it is estimated that over-deposited $PtCl_4$ tends to restrict the movement of electron due to its bundle formation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.9
• /
• pp.898-902
• /
• 2015

Alternative radio-navigation technologies aim at providing continuous navigation solution even if one cannot use GNSS (Global Navigation Satellite System). In shadowing region such as indoor environment, GNSS signal is no longer available and the alternative navigation system should be used together with GNSS to provide seamless positioning. For soldiers in battlefield where GNSS signal is jammed or in street battle, the alternative navigation system should work without positioning infrastructure. Moreover, the radio-navigation system should have scalability as well as high accuracy performance. This paper presents a TWR (Two-Way-Ranging)-based cooperative positioning system (CPS) that does not require location infrastructure. It is assumed that some members of CPS can obtain GNSS-based position and they are called mobile anchors. Other members unable to receive GNSS signal compute their position using TWR measurements with mobile anchors and neighboring members. Error propagation in CPS is analytically studied in this paper. Error budget for TWR measurements is modeled first. Next, location error propagation in CPS is derived in terms of range errors. To represent the location error propagation in the CPS, Location Error Propagation Indicator (LEPI) is proposed in this paper. Simulation results show that location error of tags in CPS is mainly influenced by the number of hops from anchors to the tag to be positioned as well as the network geometry of CPS.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.767-773
• /
• 2014

The carrier-to-noise power ratio is a key parameter for determining the reliability of PVT (Position, Velocity, and Time) solutions which are obtained by a GNSS (Global Navigation Satellite System) receiver. It is also used for locking a tracking loop, deciding the re-acquisition process, and processing advanced navigation in the receiver subsystem. The representative carrier-to-noise power ratio estimation schemes are the narrowband-wideband power ratio method (NW), the MM (Moment Method), and Beaulieu's method (BL). The NW scheme is the most classical one for commercial GNSS receivers. It is often used as an authoritative benchmark for assessing carrier-to-noise power estimation schemes. The MM scheme is the least biased solution among them, and the BL scheme is a simpler scheme than the MM scheme. This paper focuses on the less biased estimation with low complexity when the residual phase noise remains, then proposes a novel carrier-to-noise power ratio estimation scheme with low complexity for GNSS receivers. The asymptotic bias of the proposed scheme is derived and compared with others, and the simulation results demonstrate that the complexity of the proposed scheme is lowest among them, while the estimation performance of the proposed scheme is similar to those of the BL and MM schemes in normal and high gained reception environments.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.11
• /
• pp.45-55
• /
• 1999

The small signal analyzer for the stationary drift-diffusion equation is developed. The slotboom variables of the potential, electron and hole concentrations for the response of applied small signal are defined and the stationary drift-diffusion equation is linearlized on DC operation point by $S^3A$ method. Frontal solver, which is used to solve the global matrix, progresses the accuracy of the solution in high frequency and minimizes the requirement of the memory. The simulations are executed on the structure of 3 dimensional N'P junction diode and 2 dimensional n-MOSFET to verify the proposed algorithm. The average relative errors of the conductance and the capacitance compared with MEDICI are about 26% and 0.67 for N'P junction diode and 7.75% and 2.24% for n-MOSFET. The simulation by the proposed algorithm can analyze the stationary drift-diffusion equation for applied small signal in high frequency region about 100GHz.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.95-104
• /
• 2013

As global warming and depletion of fossil fuel are considered as urgent problems, the development of electric vehicle (EV) is getting more attention by automobile industry. However, the wide adoption of EVs is not coming yet, because of many issues such as long recharging time and high cost of batteries etc. As an alternative solution to the conventional battery charging EV, the idea of battery exchanging EV is introduced. To realize the battery exchanging business model, one should solve the issues of ownership and reliability of battery. To address such issues, the concept of battery sharing should be considered together with good traceability system. In this study, we studied RFID code structure to provide better visibility and traceability for shared EV batteries. The proposed RFID code and code generation system is based on GRAI-96 of EPCglobal and included factors such as chemical, physical, and manufacturing features. The designed code can be also used as the ID of each battery.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.65-80
• /
• 2012

Mobile IP is a simple and scalable global mobility solution. However, it may cause excessive signaling traffic and long signaling delay. So MN (Mobile Node) to the home network in order to reduce the number of location update signaling is necessary to reduce the delay. In this paper, the signaling overhead to be distributed evenly on the boundary of the regional network, each MN's dynamic mobility and traffic load is adjusted according to the PMIPv6 (Proxy Mobile IPv6) networks in the proposed dynamic regional mobility management scheme (dMMS). Each user in a distributed network system that offers the least amount of signaling traffic is tailored to the optimized system configuration. Signaling cost function in order to propose a new discrete analytical model is proposed, MN's mobility and packet arrival patterns. Location update and packet delivery costs to calculate the total average, the optimized area to determine the size of the network is proposed. The results of mathematical analysis, the proposed technique dMMS in terms of reducing the cost of the entire signaling were found to be excellent performance.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.6
• /
• pp.537-544
• /
• 2004

An effective methodology is reported for determining the optimal lot size of batch processing and storage networks which include uncertain demand forecasting. We assume that any given storage unit can store one material type which can be purchased from suppliers, internally produced, infernally consumed, transported to or from other sites and/or sold to customers. We further assume that a storage unit is connected to all processing and transportation stages that consume/produce or move the material to which that storage unit is dedicated. Each processing stage transforms a set of feedstock materials or intermediates into a set of products with constant conversion factors. A batch transportation process can transfer one material or multiple materials at once between sites. The objective for optimization is to minimize the probability averaged total cost composed of raw material procurement, processing setup, transportation setup and inventory holding costs as well as the capital costs of processing stages and storage units. A novel production and inventory analysis formulation, the PSW(Periodic Square Wave) model, provides useful expressions for the upper/lower bounds and average level of the storage inventory. The expressions for the Kuhn-Tucker conditions of the optimization problem can be reduced to two sub-problems. The first yields analytical solutions for determining lot sires while the second is a separable concave minimization network flow subproblem whose solution yields the average material flow rates through the networks for the given demand forecast scenario. The result of this study will contribute to the optimal design and operation of the global supply chain.