• 한국항만경제학회지
• /
• 제33권3호
• /
• pp.105-120
• /
• 2017

본 연구는 글로벌 컨테이너 해운시장의 경쟁구조 변화를 살펴보고 세가지 관점에서 우리나라 컨테이너선대 규모를 분석하였다. 경쟁구조 변화 분석에서는 시장집중도 비율과 허쉬만-허핀달 지수를 분석하였으며 선대 규모 분석에서는 첫째 얼라이언스 내 경쟁력 확보 규모, 둘째 국내 수출입 컨테이너 화물의 국적선 적취율 제고를 위한 선대규모, 셋째 주요 해운국의 특성을 고려한 패널모형을 통한 선대규모 분석 세가지 측면에서 검토하였다. 분석결과, 글로벌 컨테이너 해운시장이 과점화 되고 있는 것으로 나타났으며 현재 한국의 컨테이너 선대 규모는 세가지 분석 모두에서 부족한 것으로 분석되었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.496-506
• /
• 2014

In this paper the scenario based optimization of the bulbous bow of the KRISO Container Ship (KCS) is presented. The optimization of the parametrically modeled vessel is based on a statistically developed operational profile generated from noon-to-noon reports of a comparable 3600 TEU container vessel and specific development functions representing the growth of global economy during the vessels service time. In order to consider uncertainties, statistical fluctuations are added. An analysis of these data lead to a number of most probable upcoming operating conditions (OC) the vessel will stay in the future. According to their respective likeliness an objective function for the evaluation of the optimal design variant of the vessel is derived and implemented within the parametrical optimization workbench FRIENDSHIP Framework. In the following this evaluation is done with respect to vessel's calculated effective power based on the usage of potential flow code. The evaluation shows, that the usage of scenarios within the optimization process has a strong influence on the hull form.

• 한국항행학회논문지
• /
• 제14권6호
• /
• pp.783-790
• /
• 2010

현재 대부분의 선박은 해상에서의 안전한 운항을 위하여 GPS를 이용하여 선박 위치를 파악하고 있다. 이 연구에서는 GPS 정밀단독측위기법을 이용하여 준실시간으로 해상 선박의 위치를 결정하고, 그 정밀도를 분석하였다. 이를 위하여 선박에 GPS 장비를 설치하여 남해안 관측을 실시하였다. 정밀단독측위 기법을 이용한 GPS 관측데이터 처리를 위하여 JPL에서 개발한 GIPSY-OASIS를 이용하였으며, 안테나 위상 중심 변동량과 해양 조석하중에 의한 지각 변동량, 그리고 방위각 방향으로의 대류층 지연량을 보정하였다. 그 결과 이 연구에서 산출한 준실시간 좌표는 ~1cm 수준의 정밀도를 달성하였다.

• 한국해양공학회지
• /
• 제30권4호
• /
• pp.235-242
• /
• 2016

In general, ship hull form design is carried out in two stages. In the first stage, the longitudinal variation of the sectional area curves is adapted from a similar mother ship to determine the volume distribution in ships. At this design stage, the initial design conditions of displacement, longitudinal center of buoyancy, etc. are satisfied and the global hydrodynamic properties of the structure are optimized. The second stage includes the local designing of the sectional forms. Sectional forms are related to the local pressure resistance in the fore- and aft-body shapes, cargo boundaries, interaction between the hull and propeller, etc. These relationships indicate that the hull sections need to be optimized in order to minimize the local resistance. The volumetric balanced (VOB) variation of ship hull forms has been suggested by Kim (2013) as a generalized, systematic variation method for determining the sectional area curves in hull form design. This method is characterized by form parameters and is based on an optimization technique. This paper emphasizes on an extensional function of the VOB considering a geometrical wave profile. We select a container ship and an LNG carrier to demonstrate the applicability of the proposed technique. Through analysis, we confirm that the VOB method, considering the geometrical wave profile, can be used as an efficient tool in the hull form design for ships.

• Journal of Ship and Ocean Technology
• /
• 제8권4호
• /
• pp.26-33
• /
• 2004

PFFEM software, PFADS has been developed for the vibration predictions and analysis of coupled system structures in medium-to-high frequency ranges. PFFEM is numerical method which solves energy governing equation using finite element technique for complicated structures where the exact solutions are not available. Through the upgrades, present PFADS R3 could cover the general beam and plate structures including various kinds of beam-plate rigid joints and other joint systems such as spring-damper junction and rigid bar connection. This software is composed of 3 parts; translator, model converter and solver. The translator makes its own FE-model from bulk data of commercial FE software, and the model converter is used to convert FE-model to PFFE-model automatically. The solver calculates vibrational energy density and intensity for PFFE-model by solving global matrix equations of PFFEM. For the applications of real transportation systems, a container ship model has been examined with respect to major parameters, and reliable results have been obtained.

• 대한조선학회논문집
• /
• 제44권5호
• /
• pp.509-516
• /
• 2007

Ice load acting on a icebreaking research vessel is estimated. Existing measured ice loads are used to get the global load and the local load. The global load is for analyzing the bending behavior of the vessel during ice breaking operation mode and the local load for estimating the bow structural behavior. In the paper, the global load is predicted using the data from analysis of ship motion during ice breaking. And the local load is predicted using the data from strain gage attached to bow frames.

• 한국해양공학회지
• /
• 제26권6호
• /
• pp.74-79
• /
• 2012

The present study aims at suggesting the systematic approach to analyze the local drag components as the resistance performance characterized by the flow of the ship. In order to identify the local areas, the hull surface is decomposed into SVM (Station-Vertical Section Map) which consists of 20 stations along the longitudinal direction and 20 sections along the vertical direction (from the bottom to the waterline). Successively, on the SVM, the friction and pressure drag coefficients as the components of total drag coefficient have been analyzed for two different hull forms of Wigley and KVLCC by using CFD.

• 한국해양공학회지
• /
• 제33권3호
• /
• pp.222-228
• /
• 2019

An extreme value analysis (EVA) is essential to obtain a design value for highly nonlinear variables such as long-term environmental data for wind and waves, and slamming or sloshing impact pressures. According to the extreme value theory (EVT), the extreme value distribution is derived by multiplying the initial cumulative distribution functions for independent and identically distributed (IID) random variables. However, in the position mooring of DNVGL, the sampled global maxima of the mooring line tension are assumed to be IID stochastic variables without checking their independence. The ITTC Recommended Procedures and Guidelines for Sloshing Model Tests never deal with the independence of the sampling data. Hence, a design value estimated without the IID check would be under- or over-estimated because of considering observations far away from a Weibull or generalized Pareto distribution (GPD) as outliers. In this study, the IID sampling data are first checked in an EVA. With no IID random variables, an automatic resampling scheme is recommended using the block maxima approach for a generalized extreme value (GEV) distribution and peaks-over-threshold (POT) approach for a GPD. A partial autocorrelation function (PACF) is used to check the IID variables. In this study, only one 5 h sample of sloshing test results was used for a feasibility study of the resampling IID variables approach. Based on this study, the resampling IID variables may reduce the number of outliers, and the statistically more appropriate design value could be achieved with independent samples.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권3호
• /
• pp.240-245
• /
• 2014

환경오염에 대한 심각성이 대두되면서 선박부문의 온실가스 배출에 관한 연구가 전 세계적으로 활발하게 진행되고 있다. 이에 반하여 국내는 아직 기초 연구수준에 그치고 있다. 본 연구에는 실습선 한바다호를 이용하여 운항 중 발생하는 온실가스를 정량적으로 조사하였고, 연료소모량과 육상전기 사용량을 바탕으로 실습선이 배출하는 온실가스를 산정하였다. 2012년 1년 동안의 실제 운항데이터에서 연료소모량과 육상전기 사용량을 기본으로 Tier 1 방법을 이용하여 온실가스를 산정하였다. 이를 통하여 선박 총톤수 1톤을 운항 유지하는데 배출되는 배출 가스량과 실습생 1명을 1년 실습시키는데 발생하는 가스량을 분석하였다. 향후 선박에서 발생하는 오염물질의 인벤토리를 지속적으로 관리하여 강화되고 있는 국제 규제에 대비해야 할 것으로 사료된다.

• 한국산업융합학회 논문집
• /
• 제26권2_2호
• /
• pp.333-340
• /
• 2023

Environmental regulations are being strengthened worldwide to solve global warming. For this reason, interest in eco-friendly gas fuels such as LNG and hydrogen is continuously increasing. However, when adopting eco-friendly gas fuel, liquefying at a cryogenic temperature is essential to ensure economic feasibility in storage and transportation. Although austenitic stainless steel is typically applied to store cryogenic liquefied gas, structural steel can experience sudden heat shrinkage in the case of leakage in the loading and unloading process of LNG. In severe cases, the phase of the steel may change, so care is required. This study conducted Charpy impact tests on steel material in nine different temperature ranges, from room to cryogenic temperatures, to analyze the effects of cryogenic liquefied gas leaks. As a result of the study, it was not easy to find variations in ductile to brittle transition temperature (DBTT) due to the leakage of cryogenic liquefied gas. Still, the overall impact toughness tended to decrease, and these results were verified through fracture surface analysis. In summary, brittle fracture of the steel plate may occur when a secondary load is applied to steel for hull structural use exposed to a cryogenic environment of -40 ℃ or lower. Therefore, it needs to be considered in the ship design and operating conditions.