• Composites Research
• /
• 제29권4호
• /
• pp.173-178
• /
• 2016

Graphene oxide (GO) was concurrently reduced and functionalized using long alkyl chain dodecyl amine (DA). The DA functionalized GO (DA-G) was assumed to disperse homogenously in linear low density polyethylene (LLDPE). Subsequently, DA-G was used to fabricate DA-G/LLDPE composites by melt mixing technique. Fourier transform infrared spectra analysis was performed to ascertain the simultaneous reduction and functionlization of GO. Field emission scanning electron microscopy analysis was performed to ensure the homogenous distribution and dispersion of DA-G in LLDPE matrix. The enhanced storage modulus value of the composites validates the homogenous dispersion of DA-G and its good interfacial interaction with LLDPE matrix. An increased in tensile strength value by ~ 64% also confirms the generation of good interface between the two constituents, through which efficient load transfer is possible. However, no significant improvement in glass transition temperature was observed. This simple technique of fabricating LLDPE composites following industrially viable melt mixing procedure could be realizable to developed mechanically strong graphene based LLDPE composites for future applications.

• 한국융합학회논문지
• /
• 제9권6호
• /
• pp.45-52
• /
• 2018

본 논문은 단일 이미지에서 초해상도 영상 생성을 위해 저해상도 이미지에서 생성한 패치정보를 기반으로 선형보간하는 방법을 제안하였다. 기존의 초해상도 생성 방법인 전역 공간의 회귀 모델을 사용하면 특정 영역에 대해 참조할 정보가 부족하여 일반적으로 품질이 떨어지는 결과가 나타난다. 이러한 결과를 보완하기 위해 제안하는 방법은 초해상도 이미지 생성 과정에서 영상을 패치 단위로 지역을 분할하여 의미있는 정보를 수집하고, 수집된 정보를 기반으로 초해상도 이미지 생성을 위해 확장시킨 이미지 매트릭스 영역의 구성정보를 분석하여 선형 보간 과정을 거치고 패치정보를 대응시켜 탐색한 최적의 패치 정보를 기준으로 선형 보간하는 방법을 제안하였다. 실험을 위해 원본 이미지를 복원된 영상과 PSNR, SSIM으로 비교 평가하였다.

• Journal of applied mathematics & informatics
• /
• 제29권5_6호
• /
• pp.1511-1523
• /
• 2011

In this paper, we consider the smoothing Newton method for the nonlinear complementarity problems with $P_0$-function. The proposed algorithm is based on a new smoothing function and it needs only to solve one linear system of equations and perform one line search per iteration. Under the condition that the solution set is nonempty and bounded, the proposed algorithm is proved to be convergent globally. Furthermore, the local superlinearly(quadratic) convergence is established under suitable conditions. Preliminary numerical results show that the proposed algorithm is very promising.

• 한국융합학회논문지
• /
• 제7권5호
• /
• pp.213-219
• /
• 2016

본 논문에서는 한 개의 선형 제약식 하에서 의사결정변수가 상한 값을 갖는 오목 함수 최소화 문제를 다룬다. 제시된 분지 한계 해법은 단체를 분할 단위로 사용하였다. 오목함수를 가장 단단하게 하한추정하는 볼록덮개함수를 단체 상에서 유일하게 구할 수 있기 때문이다. 분지가 일어날 때마다 후보 단체로부터 1 차원 낮은 2 개의 하위 단체들이 생성된다. 이 때 후보 단체에 포함되어 있던 가능해 집합은 각각의 하위 단체로 분할된다. 한계 연산 절차는 선형인 볼록 덮개 함수를 목적 함수로 하는 선형계획법을 부문제로 정의하고 해를 구한다. 부문제의 최적 목적함수 값으로부터 최적 오목목적함수의 하한과 상한을 갱신하고, 원문제의 최적해를 포함하지 않는 단체들을 고려 대상에서 제외시킨다. 본 해법의 최대 장점은 하위 단체로 분할될수록 부문제들의 크기가 점점 작아진다는데 있다. 이것은 한계 연산의 계산량이 줄어든다는 것을 의미한다. 본 연구의 결과는 배낭 제약식 유형의 제약식 하에서의 오목 함수 최소화 문제의 해법을 개발하는데 응용될 수 있을 것이다.

• 한국정밀공학회지
• /
• 제31권11호
• /
• pp.987-992
• /
• 2014

Register control of roll-to-roll printing system for printed electronics requires accurate measurement of register errors. The register marks used for the recognition of patterns position between layers have inherently defects due to low printability of register marks themselves, which brings out inaccurate register accuracy and consequently low performance of printed electronics devices. In this study, the compensation methods for the unrecognized or missing register data are proposed to improve the recognition and consequently the control performance of register accuracy in roll-to-roll printing equipment. The compensation methods using the prior data and the linear interpolation are proposed and compared with the case without compensation for the simulation as well as experiment. Only the linear interpolation method could successfully compensate the missing data and consequently improve the register control performance. We should apply the compensation process of the register errors to improve the register control accuracy in the roll-to-roll printing equipment.

• Structural Engineering and Mechanics
• /
• 제4권2호
• /
• pp.139-148
• /
• 1996

Vector algorithms and the relative importance of the four basic modules (computation of element stiffness matrices, assembly of the global stiffness matrix, solution of the system of linear simultaneous equations, and calculation of stresses and strains) of a finite element computer program for inelastic analysis of reinforced concrete shells are presented. Performance of the vector program is compared with a scalar program. For a cooling tower problem, the speedup factor from the scalar to the vector program is 34 for the element stiffness matrices calculation, 25.3 for the assembly of global stiffness matrix, 27.5 for the equation solver, and 37.8 for stresses, strains and nodal forces computations on a Gray Y-MP. The overall speedup factor is 30.9. When the equation solver alone is vectorized, which is computationally the most intensive part of a finite element program, a speedup factor of only 1.9 is achieved. When the rest of the program is also vectorized, a large additional speedup factor of 15.9 is attained. Therefore, it is very important that all the modules in a nonlinear program are vectorized to gain the full potential of the supercomputers. The vector finite element computer program for inelastic analysis of RC shells with layered elements developed in the present study enabled us to perform mesh convergence studies. The vector program can be used for studying the ultimate behavior of RC shells and used as a design tool.

• 문화기술의 융합
• /
• 제10권1호
• /
• pp.159-164
• /
• 2024

국내 석유 시장은 국제 석유 가격의 변동에 매우 민감하기 때문에 그 변동성에 대한 파악과 대처가 중요하다. 특히, 높은 소비량을 보이는 휘발유의 가격이 어떠한 요인에 인해 변화하는지 명확하게 파악하는 것이 필요하다. 국제 휘발유 가격은 휘발유 수급, 지정학적 사건, 미국 달러화 가치 변동 등 글로벌 요인에 영향을 받는다. 그러나 기존의 연구들은 휘발유의 수급에만 초점에 맞추어 진행하였다는 한계가 존재한다. 본 연구에서는 다양한 머신러닝 기반의 회귀 모델을 활용하여 거시적 경제지표와 국제 휘발유 가격 간의 인과관계를 탐색한다. 첫째, 다양한 세계 경제지표 데이터를 수집한다. 둘째, 데이터 전처리를 진행한다. 셋째, 다중선형회귀, Ridge 회귀, Lasso(Least Absolute Shrinkage and Selection Operator) 회귀 모델을 활용하여 모델링한다. 실험 결과, 테스트 데이터 셋에서 다중선형회귀 모델이 가장 높은 정확도(97.3%)를 보였다. 우리는 국제 휘발유 가격의 예측은 국내 경제 안정성과 에너지 정책 결정에 도움이 될 수 있을 것으로 기대한다.

• Steel and Composite Structures
• /
• 제25권6호
• /
• pp.663-670
• /
• 2017

The problem of layup optimization of the composite laminates involves a very complex multidimensional solution space which is usually non-exhaustively explored using different heuristic computational methods such as genetic algorithms (GA). To ensure the convergence to the global optimum of the applied heuristic during the optimization process it is necessary to evaluate a lot of layup configurations. As a consequence the analysis of an individual layup configuration should be fast enough to maintain the convergence time range to an acceptable level. On the other hand the mechanical behavior analysis of composite laminates for any geometry and boundary condition is very convoluted and is performed by computational expensive numerical tools such as finite element analysis (FEA). In this respect some studies propose very fast FEA models used in layup optimization. However, the lower bound of the execution time of FEA models is determined by the global linear system solving which in some complex applications can be unacceptable. Moreover, in some situation it may be highly preferred to decrease the optimization time with the cost of a small reduction in the analysis accuracy. In this paper we explore some machine learning techniques in order to estimate the failure of a layup configuration. The estimated response can be qualitative (the configuration fails or not) or quantitative (the value of the failure factor). The procedure consists of generating a population of random observations (configurations) spread across solution space and evaluating using a FEA model. The machine learning method is then trained using this population and the trained model is then used to estimate failure in the optimization process. The results obtained are very promising as illustrated with an example where the misclassification rate of the qualitative response is smaller than 2%.

• International Journal of Control, Automation, and Systems
• /
• 제1권3호
• /
• pp.289-300
• /
• 2003

In this paper, we introduce an identification method in Fuzzy Relation-based Fuzzy Neural Networks (FRFNN) through a hybrid identification algorithm. The proposed FRFNN modeling implement system structure and parameter identification in the efficient form of "If...., then... " statements, and exploit the theory of system optimization and fuzzy rules. The FRFNN modeling and identification environment realizes parameter identification through a synergistic usage of genetic optimization and complex search method. The hybrid identification algorithm is carried out by combining both genetic optimization and the improved complex method in order to guarantee both global optimization and local convergence. An aggregate objective function with a weighting factor is introduced to achieve a sound balance between approximation and generalization of the model. The proposed model is experimented with using two nonlinear data. The obtained experimental results reveal that the proposed networks exhibit high accuracy and generalization capabilities in comparison to other models.er models.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권3호
• /
• pp.189-194
• /
• 2002

This paper presents a state observer design for a class of MTMO nonlinear systems that has a block triangular structure. For this, the extension of the existing design for SISO triangular systems to MIMO cases is provided. Since the gain of the proposed observer. depends on a nonlinear part as well as a linear one of a system, it improves the transient performance of the high gain ob-server. Also, by using a generalized similarity transformation for the error dynamics, it is shown that order some boundedness condi-tion, the proposed observer guarantees the global exponential convergence of the estimation error. Finally, we will give a simulation example to show the validity of our design methodology.