• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.1018-1022
• /
• 2000

Enhancement of the accuracy of products and productivity are essential to survive in a global industrial competition. This trend requires tighter dimensional tolerance specifications. To actively cope with the rapid change of the workpiece material and cutter geometry, a general method that can predict and analyze the machined surface is needed. Surface generation model for the prediction of the topography of machined surfaces is developed based on cutting force model considering cutter deflection and runout. This paper presents the method that constructs the three-dimensional machined surface error following the movement of a cutter, irrespective of the variations of cutting conditions. In addition, the effects of the cutting forces and the kink shape on the machined surface are extensively investigated.

• 한국소음진동공학회논문집
• /
• 제15권12호
• /
• pp.1398-1407
• /
• 2005

This paper is concerned with the vibration analysis of a rectangular plate with a rectangular hole. Even though there have been many methods developed for the addressed problem, they suffer from computational time. In this paper, we developed a new methodology called Independent Coordinate Coupling Method which can couple two independent coordinate systems for the entire plate domain and the hole. By matching the deflection condition imposed on the expressions, the relationship between the global axes and the local axes is derived. This formula is then used for the calculation of the eigenvalue problem. The numerical results show the efficacy of the proposed method.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1111-1129
• /
• 2014

A 9300 TEU container carrier was equipped in 2006 with instrumentation aimed at wave induced accelerations, and motions. In 2010 the system was extended with strain sensors to include structural loads. Section loads for vertical bending could be readily obtained but the originally intended derivation of horizontal bending and torsion from the measured strains was found to be unreliable. This paper addresses an alternative approach that was adopted in the post processing of results. In particular the concept to use acceleration sensors to capture global hull deformations along the length of the hull, and the use of a data fusion procedure to obtain section loads from combined sensor data and finite element calculations. The approach is illustrated by comparison of actually measured accelerations and local strains with values obtained from the data fusion model. It is concluded that the approach is promising but in need of further validation and development. In particular the number and shapes of the modes used may not have been sufficient to represent the true deflection and thus strain distributions along the high loaded areas.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.593-599
• /
• 2005

This paper is concerned with the vibration analysis of a rectangular plate with a rectangular hole. Even though there have been many methods developed for the addressed problem, they suffer from computational time. In this paper, we developed a new methodology called Independent Coordinate Coupling Method which can couple two independent coordinate systems for the entire plate domain and the hole. By matching the deflection condition imposed on the expressions, the relationship between the global axes and the local axes is derived. This formula is then used for the calculation of the eigenvalue problem. The numerical results show the efficacy of the proposed method.

• Computers and Concrete
• /
• 제13권5호
• /
• pp.587-601
• /
• 2014

A sophisticated finite element modeling approach is proposed to simulate unbonded post-tensioned concrete slabs. Particularly, finite element contact formulation was employed to simulate the sliding behavior of unbonded tendons. The contact formulation along with other discretizing schemes was selected to assemble the post-tensioned concrete system. Three previously tested unbonded post-tensioned two-way and one-way slabs with different reinforcement configurations and boundary conditions were modeled. Numerical results were compared against experimental data in terms of global pressure-deflection relationship, stiffness degradation, cracking pattern, and stress variation in unbonded tendons. All comparisons indicate a very good agreement between the simulations and experiments. The exercise of model validation showcased the robustness and reliability of the proposed modeling approach applied to numerical simulation of post-tensioned concrete slabs.

• Ocean and Polar Research
• /
• 제35권3호
• /
• pp.193-203
• /
• 2013

A GPS-drifter was newly designed to observe the sea surface skin current and to estimate the direct wind effect on the sea surface. After conducting a test to establish and verify the accuracy of the GPS itself in the laboratory, in-situ experimental campaigns at Saemangeum in Gunsan city and Haeundae in Busan city, Korea, were carried out to ascertain the drifter track and to estimate the velocity data set on Oct. 3, 15, 23, 27 and Nov. 25, 2011. The current meters, RCM9 and ADCP, were moored together to remove the background current field, and the wind data were obtained from several marine stations such as towers and buoys in these areas. The drifter-observed velocity show good agreement with the flow obtained by the HF radar in the Saemangeum area. The direction of the wind-driven current extracted from the drifter-observed velocity was completely deflected to the right, however the degree of the angle was different according to the drift types. The average speed of the wind-driven current matched with 2.19~2.81% of the wind speed and the deflection angle was about $8.0{\sim}10.9^{\circ}$ without adjustment for the land-sea effect, and about 2.19~2.84% and $4.1{\sim}6.0^{\circ}$ with the adjustment for the land-sea effect.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권3호
• /
• pp.344-352
• /
• 2002

In the analysis of the 3 dimensional plate structures by the finite element method, the triangular elements are generally used for the global stiffness matrix of the analyzed system. But the triangular elements of the plates have some problems in the process of formulation and in the precision of analysis. The formulation of the finite element method to analyze 3 dimensional plate structures using quadrilateral elements is presented in this paper. The degree of freedom off nodal point is 6, that is, the displacements in the direction off-y-z is and the rotations about x-y-z axis and then the degree of freedom off element is 24. For the comparison of the analysis using triangular elements and quadrilateral elements, the rectangular plates subjected to the uniform load and a concentrated load on the centroid of the plate, for which the theoretical solutions have been obtained, are analyzed. The calculated deflections of the rectangular plates using the finite element method by the triangular elements and the quadrilateral elements are also compared with the deflections of the plates calculated by theoretical solutions. The defections of the rectangular plates calculated by the finite element method using the quadrilateral elements are closer to the theoretical solutions than the defections calculated by the finite element method using the triangular elements. The deflection of the centroid of plate, calculated by the finite element method, converges to that of theoretical solution as the number of elements is increased. This convergence is much more rapid for the case of using the quakrilateral elements than fir the case of using triangular elements.

• 한국정밀공학회지
• /
• 제29권2호
• /
• pp.156-160
• /
• 2012

Recently, the demands of the large scale machine tools gradually increase to machine the large parts, such as large scale crankshaft, yaw and pitch bearings for the wind power generator and the vehicle or aircraft components. But the high technology is necessary in order to develop the huge machine tools. Furthermore, the global market of it has been monopolized by a few companies. So, we need to develop the large scale machine tools and study its core technology to rush into the increasing market. In this study, we carried out the researches for the important core technology of a multi-tasking, machine tool; a large scale 5-axis machine tool of gantry type for multi-task machining. This study is focused on the design of large size gantry type multi-axis machine. In the case of large size of machine the cross rail deflection in the X-axis is significant. To reduce the deflection due to the eccentric spindle head, a special hollow type design in the cross rail with outside ram is adapted in this study. Also, the Zig-Zag motion in the Y-axis is inevitable with the gantry geometry, which is by the un-balancing, different motion at the left and the right columns moving. We tried to reduce the influence of Zig-Zag motion using FEM with different loading conditions at the left and the right side column.

• 한국전산구조공학회논문집
• /
• 제30권6호
• /
• pp.559-566
• /
• 2017

본 논문은 시공단계에서 가설지주 설치를 요구하지 않는 역삼각 트러스 거더로 보강된 새로운 합성 데크플레이트 시스템을 제안한다. 제안된 시스템은 기존 시스템 대비 증가된 강성과 강도를 보유할 뿐 아니라 절대 층고 변화를 최소 수준으로 낮출 수 있으며 기존의 H형강 및 U형 합성보와 같은 다양한 형태의 합성보 부재와 함께 사용될 수 있다. 제안된 시스템의 시공단계 하중에 대한 구조적 성능을 평가하기 위해 5.5m의 스팬을 갖는 5개의 시험체를 제작하여 현장 조건과 유사한 재하하중을 단계적으로 적용시켜 실험을 수행하였다. 실험결과로부터 각 시험체 별 하중-변위 그래프를 구해 비선형 3차원 유한요소해석결과와 비교하였다. 비교 결과 보강 트러스 거더와 데크플레이트 사이에 효율적인 하중 분배가 이루어져 두 구조요소가 잘 일체화되었을 뿐 아니라 시공단계 하중에서의 최대 처짐이 건축구조기준의 제한치를 하회하여 사용성 조건을 잘 만족시킴을 알 수 있다.

• 한국전산구조공학회논문집
• /
• 제13권1호
• /
• pp.13-24
• /
• 2000

교량 바닥판 설계에 대한 현 시방규정은 바닥판 슬래브가 처짐이 구속된 거더에 연속 지지되어 있다고 가정하므로, 바닥판 지간 중앙의 정모멘트와 거더 상단에 발생하는 부모멘트의 크기가 같은 것으로 간주하고 있다. 그러나 바닥판에 발생하는 휨모멘트는 거더의 처짐에 의해서 많은 영향을 받고 있으며, 거더의 처짐을 고려치 않는 현 시방규정에 의해 설계된 바닥판은 상부철근의 부식으로 인한 내구성 저하와 유지보수 비용 증가 등의 문제점을 안고 있다. 따라서 본 연구에서는 매크로 요소를 이용해 거더의 처짐 효과를 고려할 수 있는 해석법을 개발하였고, 이를 유한요소법을 통해 검증하였다. 또한, 이 해석법을 바탕으로 바닥판의 횡방향 휨모멘트에 영향을 미치는 여러 변수에 대한 분석을 수행하였다. 해석 결과, 바닥판의 지점부 모멘트는 거더의 간격뿐만 아니라 거더와 바닥판의 휨강성비 교량의 길이, 하중의 재하위치, 거더의 비틀림 강성, 가로보의 휨강성과 배치 간격 등에 많은 영향을 받고 있는 것을 알 수 있으며, 영향선을 이용해 최대하중 위치를 결정하여 몇 개의 예제교량을 대상으로 지점부의 설계모멘트를 계산해 본 결과, 현 시방규정이 다소 보수적인 값을 나타내고 있다.