• 한국항공우주학회지
• /
• 제41권6호
• /
• pp.502-508
• /
• 2013

새로이 개발된 유도키트를 장착한 모의 활공탄에 대하여 지상투하시험을 수행하였다. 사출형 분리장치의 카트리지와 오리피스 조합에 따른 사출력을 측정한 결과, 오리피스 직경이 클수록 사출력이 크게 작용하였으며, 투하된 후 날개 전개장치를 비롯하여 탄의 내부에 탑재된 시험 장치들의 정상 작동을 확인하였다. 또한 영상자료로부터 활공탄의 피치각은 전방과 후방의 사출력 분포 즉 카트리지와 오리피스 조합에 따라 증가 또는 감소하는 것으로 분석되었다.

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.733-738
• /
• 2013

A guidance kit transforming a general purpose bomb into an air-to-surface gliding bomb was developed. This guidance kit consists of a flight kit and a tail kit. Flight kit contains deployable wing, GPS/INS integrated navigation system, guidance and control system. Also this guidance kit was designed to use neither electrical nor mechanical interface with aircraft, and to increase dramatically the survivabilities of pilot and aircraft with the high accuracy and the mid-range non-powered gliding capability.

• 한국항공우주학회지
• /
• 제41권4호
• /
• pp.314-318
• /
• 2013

국내 최초로 개발되는 공대지 유도키트에 대하여 미국의 MIL-HDBK 및 STANDARD를 준용한 시험을 성공적으로 수행하였다. 각종 지상시험을 통하여 유도키트의 작동 성능과 내구성을 검증하였으며, 유도키트를 일반목적폭탄에 장착한 활공탄으로 비행시험을 수행하여 중거리 활공비행성능 및 정확도가 매우 양호함을 확인하였다.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.467-473
• /
• 2017

In this paper, impact characteristics of a water entry gliding vehicle were analyzed using a finite element method. To guarantee the validity of analysis results, a convergence test was performed for several ratios of Euler and Largrange mesh sizes. The impact coefficient was calculated with respect to entry angles and angle of attacks. It can be observed that the impact coefficient was large at a high cross-section gradient and was also affected by cavitation. This study could be useful in the preliminary design stage of a water entry bomb development.

• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.277-284
• /
• 2024

For the high reliability of guidance weapon, it is important to maintain the stable supply voltage for guidance system while the bomb is gliding. However, the DC motor drive for guidance control in the low temperature can lead to the critical voltage drop due to a large inrush current. In this paper, we propose the wing deployment logic design to enhance the guidance system stability. To derive the stable drive logic based on PWM, we controlled the duty cycles for input voltage of DC motor in low temperature. The initial duty cycle was set to 40 % to relieve the inrush current. Moreover, the proper time, which is less than 1 second for controlling duty cycles, was determined by the iterative wing deployments of guidance kit. Finally, the validity of proposed logic was confirmed from the result the maximum voltage drop for the wing deployment was decreased by 23 %.