• 한국태양에너지학회 논문집
• /
• 제33권6호
• /
• pp.54-61
• /
• 2013

This is study on the glazing performance of the apartment house to predict energy saving rate when the early design stage by calculating heating load. there are various factors of the window type in apartment building to save energy such as window's U-value, SC or SHGC, window wall ration, frame factor, sunshade coefficient and so on. In this study, we analyzed the heating load focused on the U-value, SC and window wall ration using variable heating degree days method for a small and middle size units $59m^2$, $84m^2$, respectively. Each cases were calculated heating load of the real models compared to standard model to predict energy saving rate. From those cases it was drew the conclusion that were window's U-value, SC and window wall ration for the small and middle size units to expect 10% energy saving rate at least.

• Tribology and Lubricants
• /
• 제38권1호
• /
• pp.1-7
• /
• 2022

Chemical-mechanical polishing (CMP) process is a semiconductor process that planarizes a wafer surface using mechanical friction between a polishing pad and a substrate surface during a specific chemical reaction. During the CMP process, polishing pad conditioning is applied to prevent the rapid degradation of the polishing quality caused by polishing pad glazing through repeated material removal processes. However, during the conditioning process, uneven wear on the polishing pad is inevitable because the disk on which diamond particles are electrodeposited is used. Therefore, the abrasion of the polishing pad should be considered not only for the variables during the conditioning process but also when designing the CMP conditioning system. In this study, three design variables of the conditioning system were analyzed, and the effect on the pad wear profile during conditioning was investigated. The three design variables considered in this study were the length of the conditioner arm, diameter of the conditioner disk, and distance between centers. The Taguchi method was used for the experimental design. The effect of the three design variables on pad wear and uniformity was assessed, and new variables used in conditioning system design were proposed.

• KIEAE Journal
• /
• 제16권3호
• /
• pp.77-82
• /
• 2016

Purpose: The aim of this study is to calculate U-factor of the window using international standard methods and compare quantitative and tendency difference focused on ISO standard 15099 and ISO standard 10077. And the result of ISO standard calculation methods is verified using thermal performance experiment to evaluate applicability of domestic certification system. This study is utilized a basis for activation of domestic window certification system. Method: First, 16 cases are selected that is combined a variety of frame, Glazing, spacer, etc. The selected cases were simulated using WINDOW&THERM based on ISO 15099 and 10077 calculation method. Second, experiment was conducted based on Korean standard condition. Then, it was compared the error of experiment and simulation results. Through this process, ISO 15099 and 10077 calculation methods were evaluated accuracy and utilization. Result: The results show that the difference of ISO 15099 and ISO 10077-2 is maximum 5.4%. The results of comparing U-factor errors based on the Korea standard experiment test found 2.4%. Consequently, it will be possible to combination calculation methods of ISO 15099 and ISO 10077 for a single window.

• 대한치과보철학회지
• /
• 제43권3호
• /
• pp.293-305
• /
• 2005

Statement of problems. Conventional feldspathic porcelain is used extensively as a restorative material and it is subjected to grinding and polishing during fabrication and delivery procedures. There is still considerable controversy concerning the best methods to achieve the strongest porcelain restorations after such adjustments. Purpose. The objective of this study was to investigate the effects of (1) overglazing, (2) selfglazing, and (3) fine polishing on the flexural strength and fracture toughness of feldspathic dental porcelain. Material and method. Ninety porcelain disks were prepared for flexural strength test and sixty porcelain disks were fabricated for fracture toughness test. Specimens were divided into three groups for each test as follows: 1) overglazed 2) self-glazed 3) polished. The flexural strength of feldspathic porcelains was determined by ring-on-ring biaxial flexural strength test. The fracture toughness values of three experimental groups were obtained by indentation fracture toughness test. Results. The flexural strength of overglazed group was significantly higher than that of selfglazed and polished group (P<0.05), while the difference between self-glazed and polished group was not significant (P>0.05). The fracture toughness values of overglazed and polished group were significantly higher than that of self-glazed group (P<0.05), while the difference between overglazed and polished group was not significant (P>0.05). Conclusions. This results supported the use of polishing as an alternative to glazing metal ceramic restorations, as it was not detrimental in flexural strength and fracture toughness. But, under the conditions of this study, overglazing was the ideal surface finishing method of feldspathic dental porcelain.

• 한국콘텐츠학회논문지
• /
• 제10권12호
• /
• pp.236-242
• /
• 2010

심미보철의 금속-도재관은 금속소재의 하부구조에 도재를 단계별로 소성하여 제작된다. 최근 새로운 기술인 SLM법을 이용하여 하부구조를 제작하고 있다. 본 연구에서는 금속-도재관의 하부구조를 주조법과 SLM법으로 제작하고 도재를 단계별로 소성하여 도재소성단계와 제작방법에 따른 색조변화를 측색기를 이용하여 관찰하였다. 도재의 소성단계에 따른 색조변화는 불투명도재 소성한 시편군(CN1, CC1, CT1, SC1, ST1)이 몸체도재소성 시편군(CN2, CC2, CT2, SC2, ST2)과 광택소성 시편군(CN3, CC3, CT3, SC3, ST3)과 색차(${\Delta}E$=30이상)를 나타냈다(p<0.05). 그리고 제작방법에 따른 색조관찰은 주조법으로 제작된 하부구조(CN, CC, CT)와 SLM법을 제작된 하부구조(SC, ST)간의 색차(${\Delta}E$=1.5이하)는 없는 것으로 나타났다. 따라서 도재의 소성단계에서는 몸체도재소성에서 색조가 표현되며, SLM법으로 제작된 금속-도재관의 색조는 임상적용이 가능한 것으로 판단된다.

• KIEAE Journal
• /
• 제16권3호
• /
• pp.113-119
• /
• 2016

Purpose: In this study, we evaluate the annual energy performance of the detached house which was designed with the aim of zero energy. Method: The experimental house which was constructed in Gonju Chungnam in 2013, is the single family detached house of light weight wood frame with $100m^2$ of heating area. Thermal transmittance of roof (by ISO 10211) and building external walls are designed as $0.10W/m^2K$ and $0.14W/m^2$ respectively and low-e coating vacuum window glazing with PVC frame was installed. Also grid connected PV system and natural-circulation solar water heater was applied and 6kWp capacity of photovoltaic module was installed in pitched roof and $5m^2$ of solar collector in vertical wall facing the south. We analyzed the 2014 annual data of the detached house in which residents were actually living, measured though web-based remote monitoring system. Result: First, as a result, total annual energy consumption and energy production (PV generation and solar hot water) are 7,919kWh and 7,689kWh respectively and the rate of energy independence is 97.1% which is almost close to the zero energy. Second, plug load and hot water of energy consumption by category showed the highest numbers each with 33% and 31%, with following space heating 24%, electric cooker 8%, lighting 3% in order. Hot water supply is relatively higher than space heating because high insulation makes it decreased.

• 한국지진공학회논문집
• /
• 제9권3호
• /
• pp.1-8
• /
• 2005

본 연구는 지진으로 인하여 발생한 건물의 피해액을 보다 객관적으로 예측 평가할 수 있는 ACM(Advanced Component Method) 개발 방법에 관한 것이다. ACM은 지금까지의 재래식 손실 평가방법에 사용된 구조 기술자들의 주관적인 관점과 전문가적 견해에서 탈피하여, 지진의 크기에 따른 구조형식이 각기 다른 건물들의 내진 성글 평가 기술에 바탕을 둔 지진 손실 평가 방법이다. 그 과정을 살펴보면 먼저 선별된 전형적인 건축 구조물에 대하여 비선형 정적 내진 해석인 pushover 해석을 실행하여 그들의 건물 능력도와 각 부재의 비선형 응답을 계산한다. 지진하중은 ADRS(Acceleration-Displacement Response Spectrum)의 응답 가속도와 응답 변위의 형태로 표현하여 이를 건물 능력도와 함께 능력 스펙트럼법(Capacity Spectrum Method) 기법을 이용하여 건물의 내진 성능점을 찾는다. 또한 전체 건물을 주요 구조체인 기둥, 보, 슬래브 등과 비구조체인 비내력 벽판, 외벽 장식용 요소 등을 각각 분리하여 건물 각 부재들의 지진 응답 변위에 따른 피해율을 산출한다. 이들 각 부재들의 피해는 그 부재들의 특성에 따른 적절한 보수보강기법과 그에 따른 비용산정 모델을 이용하여 각 부재의 금전적인 피해액으로 전환한다. 마지막으로 Monte Carlo기법을 이용하여 지금까지 얻은 건물의 응답과 각 부재들의 지진에 따른 피해율, 그리고 그 부재들의 비용산정 모델을 종합하여 전체 건물의 최종의 피해율을 얻는다. 특히, 현존하는 건물에 사용된 재료와 설계 가정 하중의 가변성에 따른 건물 거동에 대한 불확실성 등을 고려하기 위하여 Latin Hypercube 추출 기법을 사용하며, 마지막으로 본 연구의 사례평가를 위하여 과거 일어났던 지진 피해정보와 손실 자료들을 바탕으로 ACM방법과 재래식 방법을 이용한 건물 손실 평가 방법을 비교 분석하였다.

• 토지주택연구
• /
• 제8권3호
• /
• pp.189-200
• /
• 2017

The work breakdown structure and the precedence relations by work activity are very important because they are the basic data for estimating the construction duration in the construction work. However, there is no standard to accurately estimate the construction duration since the size of the school facilities construction is smaller than the general construction work. Therefore, some schools are unable to open in March or September and the delay of the construction duration can cause damage to the students. To solve this problem, this study developed a work breakdown structure of school facilities construction work and analyzed the precedence relations by work activities. The work breakdown structure of the school facilities construction is composed of three steps. The operations corresponding to level 1 and level 2 are as follows. (1) 2 preparatory work categories; preparation period and temporary construction. (2) 17 architectural work categories; temporary construction, foundation & pile work, reinforced concrete work, steel roof work, brick work, plaster work, tile work, stone work, waterproof construction, wood work, interior construction, floor work, metal work, roof work, windows construction, glazing work and paint construction. (3) 7 mechanic and fire work categories; outside trunk line work, plumbing work, air-conditioning equipment work, machine room work, city gas plumbing work, sanitation facilities and inspection & test working. (4) 4 civil work categories; wastewater work, drainage work, pavement work and other work. (5) 1 landscaping work categories; planting work. The work breakdown structure was derived from interviews with experts based on the milestones and detailed statements of existing school facilities. The analysis of precedence relations by school facilities work activity utilized PDM(Precedence Diagramming Method)which does not need a dummy and the relations were applied using FS(Finish to Start), FF(Finish to Finish), SS(Start to Start), SF(Start to Finish). The analysis of this study shows that if one work activity is delayed, the entire construction duration may be delayed because the majority of the works are FS relations. Therefore, it is necessary to use the Lag at the appropriate time to estimate the standard construction duration of the school facility construction. Lag is a term used only in the PDM method and it is used to define the relationship between the predecessor and the successor in creating the network milestone. And it means the delay time applied to the two work activities. The results of this study can reasonably estimate the standard construction duration of school facilities and it will contribute to the quality of the school facilities construction.

• 대한치과보철학회지
• /
• 제38권4호
• /
• pp.446-460
• /
• 2000

All-ceramic restorations have had a more limited life expectancy than metal ceramic crowns be-cause of their lower strength. The relatively lower strength has limited the use of all-ceramic crowns to the areas where occlusal loads are lower Therefore many researches have been done to increase the strength of all-ceramic crowns. IPS Empress 2 is a new type of lithium disilicate glass-ceramic with enhanced physical characteristics which has been in use clinically since 1998. Previous researches reported that the flexural strength of all-ceramic material was greater than 300 MPa, and all-ceramic crowns can be used in staining or layering technique. The objective of this study was to investigate the influence of the thickness of IPS Empress 2 ceramic on fracture strength. Both staining technique and layering technique was investigated. Vita VMK was used as control. For all three groups, five specimens each of 0.8mm, 1.0mm, 1.4mm, 1.8mm, and 2.2mm thick-ness (a total of 75 specimens) were prepared. Control group : Vita VMK Porcelain specimens were prepared with dentine ceramic and liquid glazing was done. Group I : IPS Empress 2 were prepared with staining technique and stained twice and glazed once. Group II : IPS Empress 2 were prepared with layering technique and glazed after wash firing. The thickness and diameter of the specimen were measured and controlled after specimen preparation. Biaxial Flexure Test (ASTM Standard F394-78) was adopted as this test method produces results least affected by the edge condition of the specimens. Fracture strength was measured with Instron Universal Testing Machine. Conclusions are as follow : 1. The fracture strength was increase in order of control group, test group I, test group II. 2. Fracture strength of the group I (Empress 2 Staining) was 65.54 N in 0.8mm, 155.2 N in 1.0mm, 233.5 N in 1.4mm, 434.5 N in 1.8mm, and 600.1 N in 2.2mm. 3. Fracture strength of the group II (Empress 2 Layering) was 190.0 N in 0.8mm, 283.5 N in 1.0mm. 437.2 N in 1.4mm, 732.0 N in 1.8mm, and 1115.0 N in 2.2mm. 4. No statistical difference was found in flexural strengths according to thickness in a specified group(p>0.05).

• 고문화
• /
• 제70호
• /
• pp.133-161
• /
• 2007

'○'문과 '⊙'문청자는 굽안바닥 중앙에 부호를 새긴 것으로 제작자(공방)를 표기한 것으로 판단된다. 이들 청자가 생산된 곳은 전라남도 강진군 대구면 사당리 8.23.27호 가마터인데 'e'문청자는 23호와 27호에서만 확인되고 있어 그 생산지가 더욱 한정적이다. 기종은 완과 대접, 접시, 잔, 병, 합, 퇴주기 등이 확인되는데 접시가 수량도 많고 기형도 다양하다. 이들 청자는 대부분 전성기 청자의 문양과 같은 도범을 이용한 압출양각 기법으로 시문하고 있는데, 이는 문양과 크기 등 장식의장을 균일하게 유지할 수 있는 제작방법으로 양질청자를 생산하는데 적합한 방법이다. 또한 이 시기 상감기법이 보편화되지 않았으며, 압출양각 기법을 이용하여 유사한 청자를 다량 생산하여 공급하였음을 알 수 있었다. 이들 청자는 내화토 비짐이 일부 있으나 대부분 전면 시유 후 U자형 굽의 안바닥에 규석을 받쳐 갑번하였다. 이들 청자는 강화 희종 석릉과 파주 혜음원지, 일본 겸창시 약궁대로 무가 가옥 출토품 등을 통해 1230년대를 중심으로 한 13세기 2/4분기에 제작되었음을 알 수 있었다. 따라서 이들 청자는 비색청자를 대부분 12세기로 편년하면서 오는 13세기 청자의 공백을 메워줄 수 있는 매우 의미 있는 자료이다. 그리고 이 시기는 몽고에 의한 외세의 충격이 있었으나 중앙통제가 원활하게 이루어져 비색청자가 계속 생산되었음을 알려 주고 있다. 또한 강화의 갑곶리와 관청리, 행궁의 역할을 하였던 성주 혜음원, 지방의 대찰이었던 경주불국사와 남원 실상사, 대구소와 인접한 장흥의 유력층 유적 등에서 출토되고 있어 상류층을 위해 생산되었음을 알 수 있다.