• 한국전기전자재료학회논문지
• /
• 제26권4호
• /
• pp.330-334
• /
• 2013

We developed a package of remote phosphor structure having blue LED chips and phosphors physically separated, and the characteristics were evaluated according to different classifications of phosphor coatings. Remote phosphor was produced by screen printing coating on glass substrate with phosphor content rated paste and heat treatment. After mounting Remote phosphor, which has been classified according to number of coatings, on top of blue LED chips, luminous flux, luminous efficacy, CCT and CRI were measured. The measurement results showed the most suitable characteristics of white LED package as a general light source when the content rate of phosphor in Remote phosphor was 80 wt.% with 3 layers of coatings and thickness over $12{\mu}m$.

• 대한전자공학회논문지
• /
• 제22권2호
• /
• pp.90-96
• /
• 1985

PECVD장비를 사용하여 PSG를 증착하고 막의 유전 및 보호막 특성을 조사하였다. X-선 형광분석으로 PSG내의 인 농도를 분석한 결과 약 8m/o에서 포화되었다. 인 함량에 대한 PSC의 적외선 홉수율, 식각속도 및 시트저항등의 변화도 비교하였다. APCVD와 PECV각에 대한 유전특성, 스텝 커버리지, 크랙저항과 게터링효과를 검토하였다. PECVD산화막은 비중 2.4g/㎤, 굴절율 1.53, 항복전장 11-13MV/cm의 값을 가졌고 크랙저항도 APCVD산화막 보다 우수하였다 2m/o의 인을 포함하는 PECVD PSG의 경우 양호한 스텝 커버리지와 게터링효과를 보였다. 공정변수에 대한 일련의 실험을 통하여 PECVD PSC 공정으로 보다 개선된 특성의 보초막을 얻을 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.145-146
• /
• 2000

Primary emphasis was placed on the electrophoretic deposition of low voltage phosphor to indium-tin oxide-coated glass for the application of field emission display. The phosphor deposited by various parameters, such as deposition time and applied voltages was examined in detail. In addition, a comparison was made by analyzing luminance properties of the phosphor mixed with and without conducting $In_2O_3$ powder of less than 1um size. The measurement was performed as a function of $In_2O_3$ concentration from 3% to 15% by weight. The enhanced impact of indium powder mixing on the phosphor was clearly demonstrated by aging performance curve at 1000V excitation voltages with a current density of $1\;mA/cm^2$

• 한국전기전자재료학회논문지
• /
• 제19권5호
• /
• pp.437-441
• /
• 2006

The red emitting OLEDs using $Alq_3$:Rubrene-GDI4234 phosphors have been fabricated and characterized . In the device fabrication, 2- TNATA [4,4',4' - tris (2- naphthylphenyl - phenylamino ) - tripheny lamine] as the hole injection material and NPB [N,N'-bis (1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as the hole transport material were deposited on the ITO(indium tin oxide)/glass substrate by vacuum evaporation. And then, red color emissive layer was deposited using $Alq_3$ as the host material and Rubrene(5,6,11,12-tetraphenylnaphthacene)-GDI4234 as the dopants. finally, small molecule OLEDs with structure of ITO/2-TNATA/NPB/$Alq_3$:Rubrene-GDI4234/$Alq_3$/LiF/Al were obtained by in-situ deposition of $Alq_3$, LiF and Al as the electron transport material, electron injection material and cathode, respectively. Red OLEDs fabricated in our experiments showed the color coordinate of CIE(0.65, 0.35) and the maximum power efficiency of 2.1 lm/W at 7 V with the peak emission wavelength of 632 nm.

• 마이크로전자및패키징학회지
• /
• 제9권1호
• /
• pp.29-33
• /
• 2002

The SrS:Cu, Ag thin film electroluminescient devices were fabricated on $AlTiO_3$/ITO/glass substrates by electron-beam evaporation. The emission spectrum of the device was about 460 nm with $\chi$=0.20, y=0.29 in the CIE color coordinator. It was found that the emission spectrum was saturated to pure blue color when Ag sensitizer was doped in SrS:CuCl phosphors. The luminance of the device was increased by increasing the sulfur pressure. The measured luminance was saturated with 430 cd/$m^2$at the applied voltage of 90 V and the maximum luminance was 580 cd/$m^2$at 110V. The polarization charge and conduction charge of the devices were found to be found to be about $3.5\mu$C/$\textrm{cm}^2$ and $7.4\mu$C/$\textrm{cm}^2$, respectively.

• ETRI Journal
• /
• 제24권4호
• /
• pp.290-298
• /
• 2002

We present, for the first time, a prototype active-matrix field emission display (AMFED) in which an amorphous silicon thin-film transistor (a-Si TFT) and a molybdenum-tip field emitter array (Mo-tip FEA) were monolithically integrated on a glass substrate for a novel active-matrix cathode (AMC) plate. The fabricated AMFED showed good display images with a low-voltage scan and data signals irrespective of a high voltage for field emissions. We introduced a light shield layer of metal into our AMC to reduce the photo leakage and back channel currents of the a-Si TFT. We designed the light shield to act as a focusing grid to focus emitted electron beams from the AMC onto the corresponding anode pixel. The thin film depositions in the a-Si TFTs were performed at a high temperature of above 360°C to guarantee the vacuum packaging of the AMC and anode plates. We also developed a novel wet etching process for $n^+-doped$ a-Si etching with high etch selectivity to intrinsic a-Si and used it in the fabrication of an inverted stagger TFT with a very thin active layer. The developed a-Si TFTs performed well enough to be used as control devices for AMCs. The gate bias of the a-Si TFTs well controlled the field emission currents of the AMC plates. The AMFED with these AMC plates showed low-voltage matrix addressing, good stability and reliability of field emission, and good light emissions from the anode plate with phosphors.

• 대한금속재료학회지
• /
• 제47권1호
• /
• pp.44-49
• /
• 2009

본 연구에서는 2인치 ITO의 타깃으로 ITO박막을 성장시킨 후 RTA 처리로 인한 전기적, 광학적 특성의 변화를 조사하였으며, RTA 처리된 ITO 박막을 이용하여 플라즈마 응용 사인보드를 제작 및 구동하였다. RTA공정으로 열처리한 ITO는 투과도는 증가하며, 비저항은 감소함을 관찰하였으며, 투과도의 증가는 RTA로 인한 결정성의 증가로 인한 결과이고, 비저항의 감소는 결정성의 증가와 더불어 치환형 주석의 원자수가 증가하였다고 사료된다. ITO를 이용하여 사인보드 제작시 방전cell의 압력은 3-5 Torr가 적당함을 알 수 있었으며, 전극 간격을 조절하여 120 V 정도의 낮은 플라즈마 개시 전압을 갖는 플라즈마 응용 사인보드를 성공적으로 제작 할 수 있었다.

• E2M - 전기 전자와 첨단 소재
• /
• 제12권7호
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

• 한국재료학회지
• /
• 제11권6호
• /
• pp.448-452
• /
• 2001

ZnS:Cu,Cl 형광체를 이용하여 ITO/glaas 기판위에 스크린인쇄법으로 적층형과 혼합형 구조로된 2종류의 교류전계 발광소자를 제작한 후 인가전압과 주파수에 따른 광학적, 전기적 특성을 조사, 비교하였다. 적층헝의 경우 발광휘도는 400Hz, 200V 구동전압에서 약 55 cd/$\m^2$를 나타내었다. 인가전압의 주파수를 400Hz에서 30Hz로 증가시킬 경우 휘도는 420 cd/$\m^2$로 크게 향상되었다. 혼합형의 경우 400Hz의 주파수에서 문턱전압은 45V이었고, 200V, 30KHz 주파수의 동작조건에서 최대휘도는 670 cd/$\m^2$ 이었다. 휘도-전압 특성 측정결과 적층형구조 보다 혼합형 소자구조에서 발광강도가 약 1.5배 증가하였다. 주파수에 따른 주발광 파장의 변화는 양쪽시료 모두 유사하게 나타났다. 1KHz이하의 저주파에서는 652 nm의 청녹색 발광과장을 나타내었으며 5KHz이상에서는 452 nm과장의 청색발광을 나타내었다.