• Fibers and Polymers
• /
• 제5권3호
• /
• pp.245-251
• /
• 2004

Poly(trimethylene terephthalate-co-trimethylene 2,6-naphthalate)s (P(TT-co-TN)s) with various copolymer composition were synthesized, and their chain structure, thermal property and crystalline structure were investigated by using $^1$H-NMR spectroscopy, differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD), respectively. It was found from sequence analysis that all the P(TT-co-TN) copolymers synthesized have a statistical random distribution of TT and TN units. It was also observed from DSC thermograms that the glass transition temperature increases linearly with increasing the TN comonomer content, whereas the melting temperature of copolymer decreases with increasing the corresponding comonomer content in respective PTT- and PTN-based copolymer, showing pseudo-eutectic melting behavior. All the samples melt-crystallized isothermally except for P(TT-co-66 mol % TN) exhibit multiple melting endotherms and clear X-ray diffraction patterns. The multiple melting behavior originates from the dual lamellar population and/or the melting-recrystallization-remelting. The X-ray diffraction patterns are largely divided into two classes depending on the copolymer composition, i.e., PTT and PTN $\beta$-form diffraction patterns, without exhibiting cocrystallization.

• 한국세라믹학회지
• /
• 제43권3호
• /
• pp.148-151
• /
• 2006

In order to examine the process parameters for the vitrification of Low and Intermediate Level radioactive Waste (LILW) generated from nuclear power plants, measurements of several melt properties was performed for four selected glasses containing simulated waste. Electrical conductivity and viscosity were determined at temperatures ranging from 1123 to $1673^{\circ}C$. The temperature dependences of both properties in the molten state showed a similar behavior in which their values decrease as the temperature increases. The values of the electrical conductivity and viscosity at a temperature of 1423K adopted in an induction cold crucible melter process were $0.27{\sim}0.42$ S/cm and $9.8{\sim}42$ dPas, respectively.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.412-422
• /
• 1999

Scale defects generated on the strip surface in a tandem finishing mill line are collected from the strip trapped among the production mills by freezing the growing scale on the strip by the melt glass coating and shutting down the line simultaneously. The samples observed of its cross sectional figure showed the process of scale defect formation where the defects are formed at the base metal surface by thicker oxidized scale during each rolling passes. The properties of the oxidized layer growth both at rolling and inter-rolling are detected down sized rolling test simulating carefully the rolling condition of the production line. The thickness of the oxidized layer at each rolling pass are simulated numerically. The critical scale thickness to avoid the defect formation is determined through the expression of mutual relation between oxidized layer thickness and the lanks of the strip called quality for the scale defects. The scale growth of scale less than the critical thickness and also to keep the bulk temperature tuning the water flow rate and cooling time appropriately. Two units of Inerstand Cooler are designed and settled among the first three stands in the production line. Two units of scale defect is counted from the recoiled strip and the results showed distinct decrease of the defects comparing to the conventionaly rolled products.

• 한국응용과학기술학회지
• /
• 제16권3호
• /
• pp.255-262
• /
• 1999

The new copolymers which contain flexible spacers in main chain were prepared and their properties were studied. the copolymers were synthesized in the melt polymerization melted from diacetoxynaphthalene isomers, ${\alpha},{\omega}bis(4-carboxyphenoxy)$ alkanes and p-acetoxy benzoic acid in the molar ratio of 1:1:2 and characterized for the effects of structure of naphthalenediol isomer moieties and the spacers on thermal crystalline and liquid crystalline properties of the resulting polymers. Diacetoxy naphthalene isomers were used 1. 5-,1. 6-,2. 6-and 2. 7-disubstituted ones and the spacers was either tetramethylene or decamethylene. The polymer was characterized by elemental and spectropic analysis, differential scanning calorimetry (DSC) on a polaring microscope, wide-angle X-ray diffractometry and thermogravimetry (TGA). There glass transition temperatures (Tg) and melting temperature (Tm) on the structure of the naphthalenediol isomer moieties and the length of the spacers. The presence of spacers was found to the helpful in crystallization of 1. 6-naphthalenediol copolyesters. The presence of amide group in the backbone chain of polymer was found to increase transition temperature, crystallization, thermal stability of polymers but to decreas solubility.

• Journal of the Korean Wood Science and Technology
• /
• 제37권5호
• /
• pp.434-439
• /
• 2009

This study investigates the thermal properties of nanocomposites prepared from poly(lactic acid) (PLA), wood flour (WF) and montmorillonite (MMT) by melt compounding with a twin screw extruder. In order to enhance the mechanical properties of PLA/WF composites, maleic anhydride grafted PLA (MAPLA) is synthesized as a compatibilizer. MAPLA prepared in the laboratory is characterized using FR-IR. From SEM microphotographs, the presence of MAPLA has a positive effect on the mechanical properties of WF-reinforced PLA composites. The addition of WF/MAPLA into neat PLA increased the glass transition temperature ($T_g$). The addition of 1 to 5 wt% MMT into PLA/WF/MAPLA composite decreases the $T_g$. The cold crystallization temperature ($T_{cc}$) was decreased by the addition of MMT. The MMT could act as effective nucleating sites of PLA crystallization. The thermal stability evaluated by thermogravimetric analysis (TGA) is improved with the contents of MMT up to 3 wt%.

• 열처리공학회지
• /
• 제15권2호
• /
• pp.76-81
• /
• 2002

The melt-spun amorphous $Fe_{77-X}P_{13}C_4B_4Al_2Mo_X$(x=4~10) and $Fe_{82-X}P_XC_4B_4Al_2Mo_8$(x=9~15) alloys were found to exhibit a large supercooled liquid region(${\Delta}T_x$) exceeding 40 K before crystallization. The largest ${\Delta}T_x$ for the glassy alloys containing Mo reaches as large as 65 K for the $Fe_{69}P_{13}C_4B_4Al_2Mo_8$ alloy. The corrosion behavior of the amorphous $Fe_{77-X}P_{13}C_4B_4Al_2Mo_X$(x=4~15) and $Fe_(82-X)P_XC_4B_4Al_2Mo_8$ (x=9~17) alloys were examined by electrochemical measurements in 9M $H_2SO_4$ solution at 303 K. The addition of Mo(or P) for replacing some portion of Fe is effective in improving the corrosion resistance of the investigated Fe-based glassy alloys. They are spontaneously passivated and have a wide passive region with low passive current density.

• 폴리머
• /
• 제26권4호
• /
• pp.462-467
• /
• 2002

Hot embossing 공정을 이용하여 광도파로 소자를 제조하기 위하여 polymethylmeth-acrylate (PMMA)와 polyvinylidenefluoride (PVDF)를 용융 혼합하여 물리적 성질과 광학적 특성을 조사하였다. PMMA/PVDF 혼합물의 유리전이온도 ($T_g$)는 PVDF의 함량이 증가할수록 감소하였다. 하지만 PVDF의 결정은 관찰되지 않았다. PMMA와 비교적 적은 양인 PVDF간의 분자수준의 상호작용에 기인하는 혼화성에 의하여 $T_g$는 감소하고 PVDF의 결정화를 방해하여 무정형성을 유지하는 것으로 판단되었다. PMMA/PVDF 혼합물의 전단점도는 PMMA와 PVDF 사이에서 나타나며 PMMA와 PVDF 사이의 상용성에 의해 PVDF의 함량이 증가할수록 감소하였다. PVDF의 함량이 증가할수록 불소분자의 첨가에 의한 분자의 분극률이 저하되어 혼합물의 굴절률과 흡수손실은 감소하고 투과율은 증가하였다.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.192-196
• /
• 2016

The Fe-Si-B-Nb-Cu alloys containing Ca and Al were rapidly solidified to thin ribbons by melt-spinning. The ribbons were ball-milled to make powders, and then mixed with 1 wt.% water glass and 1.5 wt.% lubricant. The mixed powders were burn-off, and then compacted to form toroidal-shaped cores, which were heat treated to crystallize the nano-grain structure and to remove residual stress of material. The characteristics of the powder cores were analyzed using a differential scanning calorimetry (DSC) and a B-H meter. The microstructures were observed using transmission electron microscope (TEM). The optimized soft magnetic properties (${\mu}_i$ and $P_{cv}$) of the powder cores were obtained from the Ca and Al containing alloys after annealing at $530^{\circ}C$ for 1 h. The core loss of Fe-Si-B-Nb-Cu-based powder cores was reduced by the addition of Ca element, and the initial permeability increased due to the addition of Al element.

• 폴리머
• /
• 제24권5호
• /
• pp.701-712
• /
• 2000

인발수지 함침장치를 사용하여 장섬유 강화 GF/PA 연속섬유를 제조한 후, 이에 PP 수지를 부가하는 새로운 방법으로 GF/PA/PP 삼성분계 복합재료를 제조하였다. 이들 복합재료의 기계적 특성을 비교한 결과, 제조 공정에 따라 물성이 다르게 나타났다. 예측한 대로 단일 사출 공정으로 제조한 GF/PA/PP(I) 복합재료 시편이 압출 후 사출 공정을 거친 GF/PA/PP(EI) 복합재료 시편보다 장섬유 함량이 높아 우수한 물성을 보여 주었다. 각 상 간의 계면 결합력을 개선시키기 위하여 상용화제로 PP-MAH를 첨가한 복합재료 제조 연구를 수행한 결과, 상용화제가 첨가되지 않은 복합재료보다 상용화제가 도입된 복합재료가 각 상 간의 계면 결합력이 향상되어 점도 및 기계적 특성이 크게 증가함을 볼 수 있었다. 특히, 이들 복합재료의 모폴로지를 관찰한 결과 상용화제가 첨가되지 않은 GF/PA/PP 복합재료의 경우는 가공 방법에 관계없이 유리섬유 주변에 PA 수지가 남아 있는 형태학적 구조를 나타내었으나, 상용화제로 PP-MAH가 도입된 경우는 PA 수지와 PP 수지 및 기지재와 유리섬유 사이에 계면 결합력이 증가됨으로 인해 유리섬유 계면에 인접한 수지가 PA 수지외에 PP 수지도 남아 있는 복잡한 구조를 보여 주었다.

• 공업화학
• /
• 제8권3호
• /
• pp.454-462
• /
• 1997

새로운 poly(tetramethylene 2,6-(naphthaloyldioxy)dibenzoates)(TLCP) 블록과 poly (butylene 2,6-naphthalate)(PBN) 블록으로 구성된 열방성 블록공중합체(TLCP-b-PBN)를 용액중합에 의하여 합성하였고, in-situ 복합재료를 제조하기 위해서 poly(ethylene 2,6-naphthalate) (PEN)과 용응블렌드하였다. TLCP domain은 용융상태에서 네마틱 상을 보여 주었다. 블록공중합체는 DSC 열곡선에서 PBN과 TLCP domain에 해당되는 두 개의 뚜렷한 용응전이점을 보여 주었다. 블렌드내의 PEN의 유리전이온도 ($T_g$)는 TLCP-b-PBN의 함량에 따라 감소하였으며, TLCP-b-PBN은 매트릭스 고분자에 대한 기핵제로 작용하였다. 편광현미경 관찰결과 20% TLCP-b-PBN 블렌드 경우 PEN의 용융점이상 온도에서 잘 배향된 TLCP fibril을 볼 수 있었다. 압출된 블렌드를 액체질소내에서 절단하여 전자현미경을 이용하여 모폴로지를 관찰한 결과 TLCP domain은 $0.15{\mu}m$에서 $0.2{\mu}m$ 크기로 균일하게 분포되어 있음을 확인하였다. 매트릭스 곡분자와 TLCP와의 계면접착력은 비교적 좋았으며, 매트릭스 고분자내의 TLCP domain은 중앙에서는 구형의 모양을, 표면에서는 가늘게 배향된 섬유 모양을 보였다.