• 제목/요약/키워드: Glass Filter

검색결과 221건 처리시간 0.025초

Bathythermograph Smoked-glass slide의 간역제작법 (SELF-PREPARATION OF BATHYTHERMOGRAPH SMOKED-GLASS SLIDE)

  • 허종수
    • 한국수산과학회지
    • /
    • 제1권2호
    • /
    • pp.135-137
    • /
    • 1968
  • 1938년 A. F. Spillaus에 의하여 Bathythermograph가 고안된 이내 현재까지 수차 개량된 것이 제작판매하게 되어 해양조사 또는 어장탐색에 총중한 측기로 세계 각국에서 널리 보급되었다. 이 측기는 항해중이라도 수심 270m까지 내렸다 올림으로써 수심에 대한 수온이 동시에 연속된 일선으로 도은 또는 Smoked한 유리 판상에 기록되어 신속하게 수온의 미세한 수직분포를 알 수 있어 어장탐사에 필요한 나층의 판별과 그 수탐 및 수온의 판단에 큰 도움을 준다. 여기에서는 1, 2연전 이내 수산진흥원 산하 각 해구 시험소 및 교육기관을 비롯한 해양조사 관계기관에 다수양이 공급되어 널리 사용되고 있는 B.T의 Smoked-glass slide가 없어 사용의 곤란성 및 일본 또는 미국으로부터의 수입의 귀찮은 수속을 해소시키기 위하여 본원에서 실험 제작사용한 결과로서 간단하게 B.T Smoked glass Slide를 제작할 수 있는 방법을 소개하고자 한다.

  • PDF

열전지용 용융염 전해질의 유리필터분리판의 담지특성 (The Holding Characteristics of the Glass Filter Separators of Molten Salt Electrolyte for Thermal Batteries)

  • 조광연;류도형;허승헌;신동근;김현이;정해원;조성백
    • 한국세라믹학회지
    • /
    • 제45권8호
    • /
    • pp.464-471
    • /
    • 2008
  • The electrolyte separator for thermal battery should be easily handled and loaded a large amount of the molten salt. Ceramic fibers, especially fibrous commercial glass filters were used as an electrolyte separator and the lithium based molten salts were infiltrated into the ceramic filters. The pore structures of the ceramic filter and the melting properties of the lithium salts affected to the electrolyte loading and leakage. During the infiltration, ions of $Li^+$ and $F^-$ in the molten salts were reacted with the glass fiber and caused to be weaken the fiber strength.

충격기류 탈진방식 여과포집진장치에서 탈진조건 변화에 따른 국산유리섬유여과포의 성능시험 (Performance Test of Domestic Glass Fabric by varying cleaning conditions in a Pulse-Jet Cleaned Fabric Filter)

  • 박영옥;구철오;임정환;김영성;손재익
    • 한국대기환경학회지
    • /
    • 제10권3호
    • /
    • pp.183-190
    • /
    • 1994
  • Performance of domestic glass fabrics was tested in a Pulse- jet cleaned fabric filter under simulated coal combustion. Pulse Pressure were 2.5, 4.0kgf/$\textrm{cm}^2$ and pulse air nozzle diameter were 4.0, 6.0mm Pressure drop and penetration turned out to be low at small pulse air nozzle diameter and low pulse air pressure. Fractional penetration through the dust cake and fabric at face velocity of 1.7m/min was higher than that at face velocity of 1.0m/min. As a consequense, the performance of domestic glass fabrics was better with face velocity of less than 1.0m/min, pulse air pressure of 2.5 kgf/$\textrm{cm}^2$ and pusle air nozzle diameter of 4.0mm.

  • PDF

항공기용 탐조등 적외선 투과 유리의 열응력 파손 현상 개선 연구 (The Study on Improvement of Thermal Stress Breakage in Infrared Transmissive Glass for Aircraft Searchlight)

  • 서영진;정상규
    • 한국산학기술학회논문지
    • /
    • 제19권11호
    • /
    • pp.332-337
    • /
    • 2018
  • 항공기용 탐조등은 야간 임무 수행 시 탐색 또는 구조 임무에 사용되며, 은폐 상태를 유지하며 작전을 수행할 수 있도록 적외선 광을 제공한다. A기종 회전익 항공기 운용 중에, 적외선 생성을 위한 적외선 투과 필터 유리가 파손되는 현상이 다수 발생하였으며, 이로 인해 은폐능력이 상실되고 정비 소요가 발생하는 등의 문제점이 제기되었다. 본 논문에서는 해당 결함이 발생하는 탐조등의 운용 조건을 시험하고, 그에 따른 결함 원인을 도출한 과정을 기술하였다. 그리고 도출된 원인을 개선하기 위한 여러 가지 방안과 개선 필터 시제품 제작 과정을 정리하였다. 또한 개선된 필터가 장착된 탐조등에 대해 성능시험, 내구성 시험, 항공기 장착시험을 통해 탐조등의 규격에서 제시하는 성능 요구를 만족하는지 검증한 결과를 기술하였다. 시험 및 검증 결과 필터의 파손 현상이 개선되었으며, A 기종 항공기에 개선 필터를 적용한 결과 파손 현상이 더 이상 발생하지 않는 것을 확인하였다.

Transparent dielectric layer having color-filter function for PDP

  • Lee, Sung-Wook;Kwon, Tae-In;Lee, Yoon-Kwan;Ryu, Byung-Gil;Yoo, Eun-Ho;Park, Myung-Ho
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.632-634
    • /
    • 2002
  • Transparent dielectric layer having color-filter function in front panel for PDP(Plasma Display Panel) was successfully fabricated and characterized. Transparent dielectric layer in front panel was made of glass based on $PbO-SiO_2-B_2O_3$ ternary system. The change of properties with content variation of oxide colorants in transparent dielectric layer having color-filter function was systematically accessed. It was demonstrated that the optimized content of oxide colorants to parent glass could greatly increase up contrast ratio and color temperature without significantly degrading luminance.

  • PDF

The effect of ink adhesion on color filter glass substrates by different plasma treatment

  • Chen, Ko-Shao;Hsu, Sheng-Hsiang;Lo, Yu-Cheng;Liu, Pei-Yu;Wang, Jiun-Ming;Li, Huai-An
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
    • /
    • pp.882-885
    • /
    • 2007
  • This study discussed the effect of ink adhesion on color filter glass after different kinds of plasma treatment. From contact angle analysis, we could get different ink adhesion results after HMDSZ, $O_2$, IPA, and $CF_4$ plasma treatment. Substrates after PFMCH plasma treatment have good surface hydrophobic property, and contact angle raise from $<10^{\circ}\;to\;50^{\circ}$.

  • PDF

좁쌀약주의 여과공정 개선에 관한 연구 (Improvment on the filtration process of foxtail millet Yakju)

  • 강영주;고정삼
    • 한국식품저장유통학회지
    • /
    • 제10권4호
    • /
    • pp.482-487
    • /
    • 2003
  • 제주 지역의 대표적인 좁쌀 약주 제품에 대하여 유통 과정 중에 발생하는 침전 형성을 방지하기 위하여 여과 공정에 관한 연구를 실시하고 개선 방안을 제시하였다. 여러 공극 크기의 유리 막 여과지와 중공 사막 카트리지여과 매질을 가지고 좁쌀 약주를 여과한 결과, 대부분이 침전 형성 가능한 입자들은 1.2$\mu\textrm{m}$ 공극 크기의 여과 매질에 의한 여과로 제거 되는 것으로 조사되었다. 0.45$\mu\textrm{m}$ 중공 사막 카트리지인 경우 여과 flux는 342.8 lmh로 계산되었다. 여과에 따른 성분 변화는 크지 않은 것으로 조사되었다 그리고 4$^{\circ}C$와 실온을 48시간 씩 반복하면서 3개월간 저장 중 0.7$\mu\textrm{m}$ 공극 크기의 유리 막 여과지에 의한 여과에서도 미세한 침전 형성이 관찰되었다. 그러나 중공 사막인 경우에는 0.45$\mu\textrm{m}$에서도 침전 형성이 관찰되지 않았다. 따라서 완벽한 침전 형성 방지를 위해서는 현재 최종 여과 공정인 1 $\mu\textrm{m}$ 정밀 원통 여과지 공정 다음에 0.45$\mu\textrm{m}$ 중공 사막 여과 시스템도입이 효과적이다.

유리용해로 가스처리 건식 Bag Filter의 개선에 관한 연구 (A Study on the Improvement of Dry Bag Filter Treatment System Regarding harmful gas of Glass Recuperator)

  • 이성진;서만철
    • 환경위생공학
    • /
    • 제23권3호
    • /
    • pp.9-22
    • /
    • 2008
  • This study was conducted to develop a system that processes harmful gases and dust, which being generated in the production of micro-inorganic fabric. This can be obtained by melt spinning raw materials such as agalmatolite, fluorspar, limestone, silica under high temperature at $1500-1600^{\circ}C$ in a glass recuperator using a dry method by Cyclone Reactor or Envelope Type (ET) type Bag Filter. If the number of the members of Korea Glass Industry Association reaches up to 45, the damage of the harmful gas being generated in recuperator should not be small. In addition, research of existing facilities showed the most of harmful gas treatment facilities which adopt wet treatment or semi-dry treatment process. This was caused the problems for wastewater and the second pollutive materials. Moreover, in the dust collecting facility behind recuperator, it is also problematic that electric dust collector requires enormous initial investment. We have researched various methods to show both economic and efficient new processes for the preventive facilities of recuperator. As the result of the experiments, the removal efficiencies of HF and SOx were 99% and 87%, respectively. Although it was insignificant reaction, a pretty much interesting result that NOx showed an absorption reaction with $Ca(OH)_2$(removal efficiency was more than 25%) was obtained.

글래스 파이버 필터를 이용한 가스상 황화합물들의 여과제거특성 비교연구 (A test of the filtering efficiency of glass fiber filter against atmospheric sulfur gases)

  • 김기현;최여진
    • 분석과학
    • /
    • 제19권1호
    • /
    • pp.65-72
    • /
    • 2006
  • 본 연구에서는 필터를 이용하여 가스상 황화합물들을 필터 방식으로 제거하는 특성을 비교 분석하고자 하였다. 이를 위해, 이산화황으로 대표되는 산화황화합물과 황화수소를 위시한 5가지 환원황화합물 ($H_2S$, $CH_3SH$, DMS, $CS_2$, 와 DMDS)을 동시에 함유한 표준가스를 준비하였다. 그리고 이 가스를 연구대상으로 정한 글래스파이버 필터에 흘려주면서, 필터 통과 유무에 따른 농도차를 분석하였다. 이러한 자료를 토대로 황성분들의 제거특성을 각각의 황성분에 대비하여 해석하였다. 그 결과에 의하면, 이산화황은 필터에 의해 거의 완전하게 제거되지만, 환원황성분들은 각자의 반응성에 따라 상당히 차별화된 결과를 보였다. 반응성이 가장 강한 황화수소는 60% 가까이 제거되었다. 그러나 이에 반해, 분자량이 큰 성분들(DMS, $CS_2$, DMDS)은 필터에 제거되지 않고 거의 통과하는 것으로 나타났다.

가우시안빔에 대한 공간파수여과기 성능평가 (Assessment of Spatial Filter for Gaussian Beam)

  • 홍경희
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
    • /
    • pp.76-80
    • /
    • 1989
  • Spatial filters were designed for 1 TW high power phosphate glass laser development. Laser beam should be expanded from 1 mm diameter to 200mm diameter. Pin hole size should be determined and most of incident energy should be transmitted through out to final spatial filter. Each pin hole size is determined by calculating encircled energy for Gaussian beam from the oscillator. The optical tube length of each spatial filter is corrected to have the best collimating quality by scew raytracing through the total system.

  • PDF