건축용 막재는 자유로운 형태와 가벼움 때문에 전 세계적으로 대공간 구조물에 많이 사용되어 왔다. 건축용 막재가 바람이나 눈하중에 의해서 하중 조건하에서 구조적 문제를 발생하여 막재가 파손되는 경우가 발생하였다. 본 논문에서는 유리섬유 막재는 대한 1축인장시험 및 반복하중 시험을 수행하여 응력 변형도 곡선을 분석하고자 한다. 반복하중 시험에서 얻은 응력 변형도 곡선에서 유리섬유 막재는 반복하중이 작용할 시에 인장강도 이하에서 파단한다는 것을 알 수 있고, 폴리에스터 막재는 반복하중에 의해서 변위가 점차적으로 증가한다는 것을 보여주었다.
대기 중 휘발성유기물(VOC) 분석을 위해 가스시료 채취 용기로서 고분자 재질의 유연한 백(bag)이나 금속재질의 캐니스터 또는 유리병 등을 사용하고 있다. 본 연구에서는 가스시료 용기에 시료 채취 후 분석 시까지 단기 보관에 따른 휘발성시료의 농도 안정성을 다양한 용기에 대해 비교하였다. 시료용기로 폴리비닐플로라이드(polyvinyl fluoride, PVF), 폴리프로필렌(polypropylene, PP), 폴리에스터-알미늄(polyester aluminum, PE-Al) 재질의 폴리머백과 스테인레스 재질의 캐니스터 그리고 2종의 갈색유리병을 사용하였으며 VOC 시료로 100 nmol/mol의 벤젠, 톨루엔, 에틸벤젠, 자일렌, 스타이렌 표준가스를 사용하였다. 열탈착-가스크로마토그래프-불꽃이온화검출기(TD-GC-FID)를 사용하여 용기 종류별로 10~20일 동안 보관된 시료의 농도변화를 측정하였다. 캐니스터와 갈색병은 1주일 동안 큰 농도의 변화가 없었으며 2주까지도 처음 농도의 80 %이상 농도를 유지하였다. 폴리머재질의 모든 백(bag)형 용기의 경우는 벤젠과 톨루엔을 제외한 모든 성분이 1일 후에 처음 농도의 70 % 미만으로 큰 농도 변화를 보였다. 특히 에틸벤젠, 자일렌, 스티렌의 경우 처음 농도의 30 % 미만이 남아 매우 큰 농도 변화를 보였다.
본 연구에서는bio polyol 함량에 따라 bio polyol based 친환경 수분산 폴리우레탄을 합성하고 그 특성을 알아보고자 하였다. Polyester polyol(DT-1040)과 castor oil based polyol(COP)의 비율에 따른 bio polyol based 수분산 폴리우레탄을 성공적으로 합성한 것을 확인할 수 있었다. 합성된 bio polyol based 수분산 폴리우레탄의 Tg는 -70 ℃와 -30 ℃ 부근에서 나타났으며, COP의 함량이 증가할수록 유리전이온도 구간이 넓어지는 것을 확인할 수 있었다. 또한, COP의 함량이 증가할수록 인장강도는 감소하였고, 접착력은 DT-1040:COP=7:3일 때 최고값을 나타내었다.
고탄성, 고강도의 특성을 가지고 있는 열방성 액정고분자인 Vectra(LCP)와 무정형 poly(${\varepsilon}-caprolactam$) (PA)의 합금에서 LCP의 함량이 10parts 미만에서는 LCP의 네마틱 상의 유리전이온도가 $4{\sim}5^{\circ}C$ 정도 낮은 족으로 이동되나 그 이상의 함량에서는 유리전이온도의 이동을 볼 수 없는 것으로 보아 부분적인 상용성만 나타나게 됨을 확인하였다. PA/LCP 합금에서 LCP의 함량을 증가시켜 주기위해 N-g1ycinylmaleimide(GMI)를 합성한 다음 이를 methylmetacrylate(MMA)와 공중합시켜 poly(glycinylmaleimide-co-methylmetacrylate)[poly(GMI-co-MMA)]공중합체를 합성하고 이를 상용화제로 사용하였으며 이를 사용하는 경우 LCP 30parts 이상을 혼합하여도 혼화성이 있음을 알 수 있었고 이들 합금의 상용성은 합금의 각종 혼합비율에 따른 열적 특성과 rheological 특성을 측정하여 확인하고 고속충격특성과 굴곡강도 및 탄성율을 측정하였다.
CP 처리의 CBPE 필름의 물리화학적 특성 및 생분해 특성에 대한 영향을 연구하였다. CP 처리는 CBPE 필름의 인장 강도, 신장률, 그리고 광투과도와 같은 물리적 특성에는 영향을 주지 않았으나, air-CP 처리는 CBPE 필름의 유연성, 수분 방벽 특성, 그리고 인쇄적성을 향상시켰다. Air-CP 처리는 저장 중 CBPE 필름 표면의 조도와 O와 N 원소를 포함한 작용기의 양을 증가시켰고, 인쇄적성, 열분해성, 그리고 미생물 분해성을 향상시켰다. 본 연구에서 CP 처리 후 CBPE 필름 표면에서 보여지는 노화 현상을 XPS 결과를 통해 확인할 수 있었다. 본 연구는 CP 처리가 CBPE 필름을 비롯하여 다른 생분해성 식품 포장재의 물리적 특성과 생분해성을 향상시킬 수 있는 기술로서 적용될 수 있다는 가능성을 보여주었다.
대구경 강관 표면 보호를 위해 사용되는 필라멘트 와인딩 공정에 불포화 폴리에스터 (unsaturated polyester: UP)를 이용한 자외선 (ultraviolet) 경화 방법을 적용하고자, UP를 이용한 최적의 UV 경화 조건을 찾아보았다. 기존의 유기계 과산화물을 개시제로 사용한 열경화 방법에서는 개시제의 불안정성, 휘발성 유기물 발생, 열에 약한 대상물질의 변형 등 문제점이 발생하므로 이에 대한 개선책으로 UV 경화방법을 시도하였다. UV 경화에 사용되는 다양한 개시제 중에서 비교적 침투력이 높아서 두꺼운 고분자 층 형성이 가능한 개시제 2 종(Irgacure 819 및 Darocure 1173)을 선정하여 이들의 조합비율에 따라 경화된 UP 고분자에 대한 열역학적, 기계적 물성을 비교 분석하여 우수한 경화조건 (개시제 함량 1.5 phr, 혼합 비율 1:1.2, UV 램프로는 갈륨램프)을 찾아내었다. 또한 UP 광경화수지의 경도, 충격강도, 굴곡강도 향상을 위해 유리섬유를 수지 내에 적층하여 복합재료를 제조하고 이들의 특성을 비교한 결과 충격강도가 매우 향상되었다.
The study aims to improve the previous theory-based algorithm on the lightweight design of laminate structures of a composite ship based on the mechanical properties of fiber, resin, and laminates obtained from experiments. From a case study on using a hydrometer to measure the specific gravity of e-glass fiber woven roving fabric/polyester resin used as the raw material for the hull of a 52 ft composite ship, the equation for calculating the weight of laminate was redefined, and the relationship between decreasing mechanical properties and increasing glass content was determined from the results of material testing according to ASTM D5083 and ASTM D790. After applying these experimental data to the existing algorithm and improving it, a possible laminate design that maximizes the specific strength of the composite material was confirmed. In a case study that applied the existing algorithm based on rules, the optimal lightweight design of composite structures was achieved when the weight fraction of e-glass fiber was increased by 57.5% compared with that in the original design, but the improved algorithm allowed for an increase of only 17.5%.
열경화성 수지 복합재료의 제조과정에서 제품의 품질과 생산성 향상에 필수적인 경화 모니터링 기술을 개발하였다 경화도를 분석하기 위해, 동일한 경화조건에서 유전기법에 의한 소산계수 측정결과와 시차 주사 열분석 방법에 의한 발열량 계측 결과를 비교하였으며, 계측 감도의 향상을 위해 센서부분과 계측선의 영향을 적절히 분리하는 방법을 사용하였다. 유리섬유/폴리에스터 복합재료와 유리섬유/에폭시 복합재료에 대하여 경화과정에서의 경화도 분석을 위한 새로운 경화 모니터링 방법으로 소산계수와 온도를 동시에 고려하였다. 이 때, 소산계수의 변화 경향은 수지 점도의 변화 양상과 비교하여 분석하였다 개발된 경화 모니터링 방법은 다양한 종류의 열경화성 복합재료 경화 모니터링에 사용될 수 있다.
The mechanical properties of composites are significantly affected by external environment. It is essential to understand the degradation of material performance and judge the material's lifetime in advance. In the current research, changes in mechanical properties of glass fiber and unsaturated polyester composite materials (GFRP, Glass fiber reinforced plastic) were investigated under different bending stress and submerged in hot water at a temperature of $80^{\circ}C$. Loading time of 100 H (hours), 200 H, 400 H, 600 H, 800 H for testing under stresses equal to 0% (stress-free state), 30%, 50% and 70% of the ultimate strength was applied on the GFRP specimens. From the values of bending stress, obtained from three-point bending test, fracture energy, failure time, and life curve were analysed. Moreover, a normalized strength degradation model for this condition was also developed. It was observed that within 100 H, the decline rate of the bending strength was proportional to the pressure.
This paper was investigation of the stres corrosion cracking(SCC) mechanism and the properties of corrosion fracture surface of glass fiber reinforced plastics(GFRP) produced by hand lay up(HLU) method in synthetic sea water. Test material is GFRP, that was used vinylester type epoxy acrylate resin and an unsaturated polyester as the matrix and the chopped strand mat(CSM) type E-glss fiber as the reinforcement. The slow strain rate test(SSRT) was performed on dry, wet and saturated wet specimens in sea water. Here the pH concentration of synthetic sea water was 8.2 and the strain rate is 1 x $10^{-6}$($sec^{-1}$) and test temperature ranges varied from $-60^{\circ}C$ to $80^{\circ}C$. It could be confirmed the fact that wet specimens tested at a particular test temperature ranges were appeared the eviences of SCC such as con-planar, mirror and hackle zone. Moreover, SCC of GFRP in sea water was characterised by falt fracture surfaces with only small amounts of fiber pull-out, in partial.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.