• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.221-230
• /
• 2014

Simplified finite element model of spark ignition (SI) engine to analyse combustion heat transfer is presented. The model was discredited with 3D thermal elements of global length 5 mm. The fuel type is petrol. Internal nodal temperature of cylinder body is defined as 21000C to represent occurrence of gasoline combustion. Material information and isotropic material properties are taken from published report. The heat transfer analysis is done for the instant of combustion. The model is validated by comparing the computed maximum temperature at the piston surface with the published result. The computed temperature gradient at the crucial parts are plotted and discussed. It has been found that the critical top surface suffered from thermal and the materials used to construct the engine parts strongly influenced the temperature distribution in the engine. The model is capable to analyze heat transfer in the engine reasonably and efficiently.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.198-203
• /
• 2003

Unsteady two-dimensional nonlinear waves which are generated by the numerical wavemaker of plunging type are numerically simulated using a finite difference method in rectangular grid system. Two-dimensional Navier-Stokes equations and the continuity equation are used for the computations. Irregular leg lengths and stars are employed near the boundaries of body and free surface to satisfy the boundary conditions. Marker-density function method is adopted for the simulation of wave breaking phenomena, and the computations are carried out with various wave amplitudes and two section shapes of wavemaker. The computation results are compared with other existing computational and experimental results, and the agreement between the experimental data and the computation results is good.

• Environmental Analysis Health and Toxicology
• /
• v.18 no.4
• /
• pp.271-276
• /
• 2003

The purpose of the present study was to perform experiments of cytotoxicity using HeLa cell and to evaluate the possibility that QSAR is applicable to the cytotoxicity of alkylphenols. Higher toxicities were found in four alkylphenols in the following order: 4-n-Nonylphenol) 4-tert-Octylphenol) 4-n-Octylphenol > 4-n Heptylpheonl. Whereas other alkylphenols were apparently less toxic. By using Percent Hydrophilic Surface Area (PHSA) quantitative structure-activity relationships (QSARs) models were developed: Cytotoxicity (%) = 90.14089-4.72224 PHSA ($R^2$=0.2046, $\alpha$=0.0265). It is concluded that some of the obtained data are useful to determine whether QSAR methods can be of general use in predicting that until further work is undertaken to develop QSARs for a much wider range of homologous series of alkylphenol compounds.

• Journal of fish pathology
• /
• v.18 no.1
• /
• pp.29-37
• /
• 2005

This study investigated external symptoms, behavior characteristics and the distribution pattern of the scuticociliates in the skin, gill and blood vessel of the tiger puffer, Takifugu rubripes, infected with scuticociliates among tiger puffer cultured. The fish infected with scuticociliates did not show any external symptoms, such as change in body color or swimming behavior, in the early infection stage. However, they showed congestion, erosion, and ulcer on the skin and fin at advanced stages. They showed a turning movement, mainly stayed on the bottom, and swam with their mouths open at the surface of water. Some fish showed a sudden swimming movement of zigzag type. The scuticociliates were ovoid in shape and $20\times40{\mu}m$ in size. The scuticociliates had a contractile vesicle and a caudal cilium that ranged 10-12 ${\mu}m$, and reproduced by binary fission. Therefore the scuticociliates were identified as ciliated, belonging to class Hymenostomatia, order Scuticociliatida in morphogenetic character. The gills infiltrated with scuticociliates showed clubbed gill filament due to hypertrophy of gill lamella. Within the blood vessels, scuticociliates were observed one to ten individuals, depending on diameter of the blood vessels. Some of the scuticociliates were observed to have ingested erythrocytes.

• Tribology and Lubricants
• /
• v.34 no.6
• /
• pp.325-331
• /
• 2018

Automobiles and systems requiring high gear ratios and high power densities generally use worm gears. In particular, as worm gears have a small volume and self-locking function, home appliances such as refrigerators and washers consist of worm gears. We can classify worm gears into cylindrical worms and rectangular worms. According to the AGMA standard, there are four types of cylindrical worms, ZA, ZN, ZK and ZI, depending on the machining of the worm shaft. It is preferable to use a ZI-type worm shaft, which is a combination of a worm wheel having an involute helical tooth surface and a conjugate tooth surface. However, in many cases, industries mostly use ZK, ZN, and ZA worm shafts because of the ease of processing. This paper presents numerical approaches to produce ZI and ZA worm surfaces and worm wheel. For the analysis of the transmission error of a worm gear system, this study (1) generates surface profile functions of ZI profile worm gear and worm shaft based on the common rack theory, (2) adopts the Newton-Raphson method for the analysis of the gear surface contact condition, and (3) presents and compares the corresponding transmission errors of ZI and ZA worm gears.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.21.1-21.3
• /
• 2019

Background: Treatment planning the correction of a transverse maxillary occlusal plane cant often involves a degree of qualitative "eyeballing", with the attendant possibility of error in the estimated judgement. A simple chair side technique permits quantification of the extent of asymmetry and thereby quantitative measurements for the correction of the occlusal plane cant. Methods: A measuring instrument may be constructed by soldering the edge of a stainless steel dental ruler at 90° to the flat surface of a similar ruler. With the patient either standing in natural head position, or alternatively seated upright in the dental chair, and a dental photographic retractor in situ, the flat under-surface of the horizontal part of this measuring instrument is placed on a unilateral segment of a bilateral structure, e.g. the higher maxillary canine orthodontic bracket hook. The vertical ruler is held next to the contralateral canine tooth, and the vertical distance measured directly from the canine bracket to the flat under-surface of the horizontal part of the measuring instrument. Results: This vertical distance quantifies the overall extent of movement required to level the maxillary occlusal plane. Conclusions: This measuring instrument and simple chair side technique helps to quantify the overall extent of surgical levelling required and may be a useful additional technique in our clinical diagnostic armamentarium.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.5
• /
• pp.408-415
• /
• 2016

The offshore structures exposed to harsh corrosive such as the marine environment is essential for the quality management technique throughout the life cycle of initial design, construction and operation. Also, it should satisfy the design life and ensure the safety of the substructure with optimization of design process. This study focused on optimization of design condition for corrosion protection of wind turbine structure and computational analyzing was performed to evaluate the performance of corrosion protection with utilizing practical experimental data. We expect this analytical study contribute to improve the corrosion maintenance stability and economical efficiency of designing wind turbine structures. As a result, the design of cathodic protection system using sacrificial anodes required accurate identification of current density in order to meet the long term design life, which can be seen that a change of structure surface's coating breakdown factor is one of the key influencing factors.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.5
• /
• pp.419-428
• /
• 2014

This paper presents a numerical simulation method for the flow around advancing ships in regular waves by using a rectilinear grid system. Because the grid lines do not consist with body surface in the rectilinear grid system, the body geometries are defined by the interaction points of those grid lines and the body surface. For the satisfaction of body boundary conditions, no-slip and divergence free conditions are imposed on the body surface and body boundary cells, respectively. Meanwhile, free surface is defined with the modified marker density method. The pressure on the free surface is determined to make the pressure gradient terms of the governing equations continuous, and the velocity around the free surface is calculated with the pressure on the free surface. To validate the present numerical method, a vortex induced vibration (VIV) phenomenon and flows around an advancing Wigley III ship model in various regular waves are simulated, and the results are compared with existing and corresponding research data. Also, to check the applicability to practical ship model, flows around KRISO Container Ship (KCS) model advancing in calm water are numerically simulated. On the simulations, the trim and the sinkage are set free to compare the running attitude with some other experimental data. Moreover, flows around the KCS model in regular waves are also simulated.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.1
• /
• pp.58-66
• /
• 2014

Numerical simulations for the flows containing free surface remain difficult problems because the drastic differences of physical properties of water and air, The difference of densities makes the solution instable in particular. For the stabilities of the solutions, the most typical methods to simulate free surface flows, such as Volume Of Fluid(VOF) and Level-Set(LS) methods, impose transient zones where the physical prosperities are continuously distributed. The thickness of the transient zone is the source of the numerical errors. The other side, marker-density method does not use such a transient zone. In the traditional marker-density method, however, the air velocities of free surface cells are extrapolated from the water velocity, and the pressures on the free surface are extrapolated from the air pressures for the stability of the solution. In this study, the marker-density method is modified for the decrease of such numerical errors. That is, the pressure on the free surface is determined to coincide with the pressure gradient terms of the governing equations, and the velocity of free surface cells are calculated with the governing equations. Two-dimensional steady spilling breakers behind of a submersed hydrofoil and three-dimensional spilling breaker near a wedge shaped ship model are simulated using INHAWAVE-II including the modified marker-density(MMD) method. The results are compared with the results of Fluent V6.3 including VOF method and several published research results.

• Atmosphere
• /
• v.31 no.5
• /
• pp.525-537
• /
• 2021

Black ices on road surfaces in winter tend to cause severe and terrible accidents. It is very difficult to detect black ice events in advance due to their localities as well as sensitivities to surface and upper meteorological variables. This study develops a methodology to detect the road sections vulnerable to black ice with the use of road surface temperature data obtained from a mobile road weather observation vehicle. The 7 experiments were conducted on the route from Nam-Wonju IC to Nam-Andong IC (132.5 km) on the Jungang Expressway during the period from December 2020 to February 2021. Firstly, temporal road surface temperature data were converted to the spatial data with a 50 m resolution. Then, the spatial road surface temperature was normalized with zero mean and one standard deviation using a simple normalization, a linear de-trend and normalization, and a low-pass filter and normalization. The resulting road thermal map was calculated in terms of road surface temperature differences. A road ice index was suggested using the normalized road temperatures and their horizontal differences. Road sections vulnerable to black ice were derived from road ice indices and verified with respect to road geometry and sky view, etc. It was found that black ice could occur not only over bridges, but also roads with a low sky view factor. These results are expected to be applicable to the alarm service for black ice to drivers.