• 제목/요약/키워드: Geometrical Shape

검색결과 513건 처리시간 0.034초

정적(靜的) 및 고유진동수(固有振動數) 제약조건식(制約條件式)을 고려(考慮)한 평면(平面) 트러스 구조물(構造物)의 형상최적화(形狀最適化)에 관(關)한 연구(硏究) (Shape Optimization of the Plane Truss Structures with the Statical and Natural Frequency Constraints)

  • 이규원;이근태
    • 대한토목학회논문집
    • /
    • 제10권2호
    • /
    • pp.23-38
    • /
    • 1990
  • 본(本) 연구(硏究)에서는 다재하조건(多載荷條件), 허용응력(許容應力), 좌굴응력(座屈應力), 변위(變位), 고유진동수(固有振動數) 제약(制約)을 고려(考慮)한 트러스 구조물(構造物)의 형상(形狀)을 효율적(效率的)으로 최적화(最適化)하기 위해서 Two-Levels 분할(分割) 최적화(最適化) 기법(技法)을 택(擇)하고 Level 1에서는 허용방향법(許容方向法)에 의(依)한 단면(斷面) 최적화(最適化), Level 2에서 Powell 1법(法)의 일방향(一方向) 탐사법(探査法)에 의(依)한 목적함수(目的函數)만이 최소(最小)가 되도록 형상(形狀)을 최적화(最適化)하였다. 본 연구(硏究)의 알고리즘을 트러스의 구조모형(構造模型)에 적용(適用)하여 얻어진 연구(硏究) 결과(結果)를 요약(要約)하면 다음과 같다. 1. 본(本) 연구(硏究)의 알고리즘은 트러스의 형태(形態), 재하조건(載荷條件), 정적제약조건(靜的制約條件), 고유진동수(固有振動數) 제약조건(制約條件) 등(等)에 구애받지 않고 효율적(效率的)으로 수렴(收斂)함을 알 수 있다. 2. 트러스 구조물(構造物)의 최적형상(最適形狀)은 고려(考慮)되는 제약조건식(制約條件式)에 따라 대단(大端)히 상이(相異)함을 알 수 있다. 3. 동일(同一)한 설계조건하(設計條件下)에서 트러스의 기하학적형태(幾何學的形態)를 고정(固定)시키고 단면(斷面)만을 최적화(最適化)한 경우 보다 본(本) 연구(硏究)의 알고리즘에 의(依)하여 트러스의 형상(形狀)까지도 최적화(最適化)한 경우에는 트러스의 초기(初期)의 기하형태(幾何形態)와 설계조건(設計條件)에 따라 다소(多少) 차이(差異)가 있겠지만 중량(重量)을 상당(相當)히 감소(減少)시킬 수 있다는 사실(事實)을 알 수 있었다.

  • PDF

질병예측자료로서 사과(四科) . 사류형상(四類形象)의 의의와 미병진단적 가치 연구 (Study on the Meaning of Four Subjects and Four Species as a Disease-Prediction Data and Diagnostic Value on Ante-Disease)

  • 김종원;전수형;이인선;김규곤;이용태;김경철;엄현섭;지규용
    • 동의생리병리학회지
    • /
    • 제23권2호
    • /
    • pp.325-330
    • /
    • 2009
  • In Korea, medical diagnostic equipments and biochemical examination can not be used in order for diagnosing sub-healthy state or ante-disease state in oriental medicine clinic. So morphic analogical method used in oriental medicine can be a good tool as a disease-predictable signs in order to enable preventive diagnosis and therapy. Therefore the four geometrical subjects; Essence, Pneuma, Spirit, Blood(四科;精氣紳血) and the four taxonomical species; Pisces, Quadruped, Aves, Carapaces(四類;魚走鳥甲) are chosen as morphic models in this paper. The differences of two classifying methods with four subjects and four species were as follows. The diagnostic category was meta-medical and synthetic against medical specific. The diagnostic object was body in contrast with face. They were able to be applicant in psychology and classification of characteristics against diagnostics and therapeutics directly in oriental medicine. The theoretical basis was basic diagrams of four unit-fluids of body and morphological analogy with four animal species respectively. And the therapeutic aims were systemic pathogenesis following five phase theory against congestion and deficiency of Essence, Pneuma, Spirit, Blood. The four subjects and four species are mixed each other practically in clinic. But it should be used limitedly because of the above reasons described and must divide the principal and secondary factors and follow the pathology of principal shape factor. In order to improve the diagnostic value of ante-disease state, the discriminable standards, measurement methods, limit of interrelating interpretation and the criteria of abnormal disproportion were needed to be defined more clearly in advance.

터널의 기하학적 형태 및 캐노피 설치가 터널 환기 및 화재 확산에 미치는 영향 분석 (The Effects of Tunnel Geometrical Characteristics and Canopy Installation on the Ventilation and Fire Propagation)

  • 이창우;서기윤;김정욱
    • 한국터널지하공간학회 논문집
    • /
    • 제8권4호
    • /
    • pp.325-334
    • /
    • 2006
  • 시계조절이나 설해방지 목적으로 설치되는 캐노피 구간 내에서의 기류유동특성의 이해는 정상환기 뿐만 아니라 비상시 대처방안 강구를 위한 요건이다. 또한 터널 방재시스템 설계를 위하여서는 종단구배, 평면선형, 단면크기 및 형태 등과 같은 터널의 다양한 특성이 화재확산에 미치는 영향에 대한 정량적인 이해가 필요하다. 본 연구에서는 국내도로터널의 전형적인 특성을 적용한 터널에 캐노피가 된 경우와 종단 및 선형구배, 단면적 및 형태, 곡선구간이 환기 및 화재확산에 미치는 영향을 CFD분석함을 목적으로 하였다. 분석결과 145m길이의 캐노피인 경우 50%정도의 개구율이 기류유동 패턴 및 환기효과면에서 가장 바람직하였다. 1.8km 터널내에서 20MW 화재발생시 종단구배는 풍속분포와 화재연 확산에 큰 영향을 미치며 제트팬$({\varnothing}1250)$ 4대를 가동한 경우 화재발생 후 5분 경과시 하류 40m지점 부근에서의 화재연 농도는 +2% 구배에서는 13% 감소, -2% 구배의 경우에는 20%정도 증가하며 또한 backlayering거리가 45m정도에 달한다. 직사각형 단면터널의 경우, 화재연 농도 및 풍속분포는 말굽형 터널과 비교하여 현저한 차이가 관찰되지 않는다. 3차선 터널에서는 이들 변수는 모두 감소하며 100초 경과시 50m 정도의 backlayering을 보이며 이후 서서히 감소한다. 곡선터널인 경우는 화재연의 확산이 느리며 100초 경과시 50m에 달하던 backlayering현상은 급격히 사라진다.

우드파일 메타물질의 변수 별 진동 및 충격에 끼치는 영향 (Vibration and Impact Transmission for each Variable of Woodpile Metamaterial)

  • 하영선;황희윤;전성식
    • Composites Research
    • /
    • 제34권3호
    • /
    • pp.155-160
    • /
    • 2021
  • 메타물질은 자연발생 물질에서 발견되지 않는 특성을 만들 수 있는 여러가지 요소들의 복합체로, 힘의 방향을 변환하거나, 음의 강성을 만들거나, 진동 및 충격 특성을 바꿀 수 있다. 제작이 용이하고, 수직방향의 진동과 충격을 저감시키는데 탁월한 성능을 지닌 우드파일 메타물질의 경우, 충격 저감을 위해 충격 전달에 영향을 끼치는 변수에 대한 기초 연구가 필요하다. 최근 기하학적 요소에 따른 충격저감에 대해 연구가 진행되고 있지만, 재료적 변수가 충격저감에 끼치는 영향에 대한 연구는 미흡하다. 본 논문에서는 우드파일 실린더의 기하학적 특성(적층각도, 직경, 길이)과 재료적 특성(탄성계수, 비중, 포아송 비)을 변수화하여 유한요소해석이 진행되었다. 유한요소해석을 통해 우드파일 실린더가 충격을 전달하는 양상을 확인하고, 주효과도 분석을 통해 충격 힘과 에너지의 저감에 대한 변수 별 영향이 고찰되었고, 고속 푸리에 변환(FFT)을 통해 주파수 대역에 대한 분석이 진행되었다. 충격 힘과 진동을 저감시키기 위하여 실린더의 접촉 면적에 영향을 주는 변수들이 크게 영향을 끼치는 것으로 나타났다.

납형의 크기와 형태가 티타늄의 주조성에 미치는 영향 (Effect of different pattern size and pattern shape on castability of commercially pure titanium)

  • 서윤정;오계정;이효일;신유진;김홍주;박상원
    • 대한치과보철학회지
    • /
    • 제51권4호
    • /
    • pp.261-268
    • /
    • 2013
  • 연구 목적: 본 연구는 납형의 크기 및 형태 변화가 티타늄의 주조성에 어떠한 영향을 미치는지 확인하고자 하였다. 연구 재료 및 방법: 납형의 크기에 따라 Small Pattern군과 Large Pattern군으로 나누었고, 각각 Flat, Semicircular, Horse-shoe 및 V-shape형으로 납형의 형태에 따라 4개의 하위군으로 나누어 총 8개의 군으로 분류하였다. 모든 납형의 주입선은 Runner-bar형으로 하였다. 티타늄 주조 전용 매몰재인 실리카계 매몰재(Rematitan Plus$^{(R)}$, Dentarum, Germany)를 이용하여 매몰하였고, 아크용융 방식의 원심 주조기(Ti Cast Super R$^{(R)}$, Selec, Japan)를 사용하여 주조하였다. 주조성 평가는 완전한 형태로 주조 된 격자의 개수를 척도로 재현 정도를 확인하였다. 통계처리는 SPSS ver. 19.0 for WIN (SPSS. Inc. Chicago, IL, USA)를 사용하였다. 납형의 크기 및 형태에 따른 티타늄의 주조성을 이원변량 분산분석(Two-way ANOVA)을 이용하여 분석하였다. 결과:납형의 평균 재현율은 Small Pattern군은 95.14%, Large Pattern군은 94.30%로 Small Pattern군의 주조성이 유의하게 높았다(P<.05). 납형의 형태 변화에 따른 주조성은 Small Pattern군에서 Semicircular군 133.20개(96.52%), Horse-shoe군 132.40개(95.94%), Flat군 132.00개(95.65%), V-shape군 127.60개(92.46%) 순으로 감소하였다. Large Pattern군은 Flat군 198.60개(95.94%), V-shape군 197.80개(95.56%), Semicircular군 196.40개(94.88%), Horse-shoe군 188.00개(90.82%)순으로 감소하였다. Small Pattern군과 Large Pattern군 모두에서 납형의 형태변화에 따른 주조성은 유의할 만한 차이를 보이지 않았다(P>.05). 결론:주조체의 크기가 작을수록 주조성이 높아짐을 알 수 있었고 형태에 따른 주조성에서는 큰 영향을 받지 않는 것을 알 수 있었다.

1920년대 소비에트 구성주의 패션에 관한 연구 (A Study on Soviet Constructive Fashion in 1920s)

  • 조윤경;금기숙
    • 복식
    • /
    • 제36권
    • /
    • pp.183-203
    • /
    • 1998
  • The wave of Avant-garde swept away all in the unique social background so called 'October Revolution' and the early 1900 Russian society which was able to absorb and accept anything. The Russian avant-garde has been affected by the Cubism and the Futurism those had peculiarly appeared in the early twentieth century, spreaded out to three spheres: the Suprematism, the Rayonism and the Constructivism. The Russian Constructivism has appeared in this background, concretely and ideally ex-pressed the ideology of the revolution into the artistic form and made an huge influence to the whole Russian society. The Constructivist like Tatlin, naum Gabo, Pevaner, Rodchenko, Stepanova, Popova and Exter gave great effect on the Soviet Constructive fashion design in 1920's after the Revolution. The Soviet costume in 1920s hold in common the characteristicss of the Constructive graphic as it is, geometrical and abstractive form, energetic and motility. In fashion design, these graphic qualities have been showed as the application of geometrical form and architectural image, physical distortion and transformation. And in textile design, the simple, dynamical presentation has been appeared. We can classify the Soviet costume at this time into three occasions. The first term is from late 1910 th mid 1920, and it is altered from folk costume design to modern one. With Lamanova as the first on the list, using the folk mitif, the Constructive expression of simple form has been gradually revealed in design. Designers like Makarova, Pribylskaia and Mukhina produced the plane, simple chemise style with the decoration of the Russian traditional motif. From early to late 1920 is the second term, and it is at the pick of the most active processing of the Constructive design. Not only at the costume in daily life but also at the theatrical costume and textile, the con-structive design has been represented all avail-able fields. Many Constructivists including Stepanova, Popova, Exter and Rodchenko took part in the textile design and costume design so as to evlvo their aesthetic concept. The third term is from late 1920 to early 1930. The socialistic realism has dominated over the whole culture and art, the revolutionary dynamic motif has been presented also in textile design. The formative features of Soviet Constructive fashion design are; silhouette, from, motif, color and fabric. The first, the silhouette : a straight rectangular silhouetted has been expressed through the whole period and a volumed one with distorted human body shape has introduced in the theatrical costume design. The second, the form: many lengthened rectangular forms have been made at beginnings, but to the middle period, geometrical, architectural forms have been more showed and there are energy and movement in design. At the last period, only a partial feature-division has been seen. The third, the motif; no pattern or ethnic motif has been partly used at beginnings, a figure like circle, tri-angle has gradually appeared in textile design. At latter period, a real-existent motif like an airplane has been represented with graphing and simplicity. The fourth, the color ; because of insufficient dyeing, neutral color like black or grey color has been mainly covered, but after middle term, a primary color or pastel tone has been seen, contrast of the fabric; without much development of textile industry after the Revolution, thick and durable fabrics have been the main stream, but as time had going to the last period, fabrics such as linen, cotton, velvet and silk have been varously choesn. At the theatrical costume, new materials like plastics and metals that were able to accentuate the form. The pursuit of popularity, simplicity and functionalism that the basic concept of Constructive fashion is one of the "beauty" which has been searching in modern fashion. And now we can appreciate how innovative and epochal this Soviet Constructive fashion movement was.ement was.

  • PDF

역공학에서의 Delaunay 삼각형 분할에 의한 STL 파일 생성 (STL Generation in Reverse Engineering by Delaunay Triangulation)

  • 이석희;김호찬;허성민
    • 대한기계학회논문집A
    • /
    • 제26권5호
    • /
    • pp.803-812
    • /
    • 2002
  • Reverse engineering has been widely used for the shape reconstruction of an object without CAD data and the measurement of clay or wood models for the development of new products. To generate a surface from measured points by a laser scanner, typical steps include the scanning of a clay or wood model and the generation of manufacturing data like STL file. A laser scanner has a great potential to get geometrical data of a model for its fast measuring speed and higher precision. The data from a laser scanner are composed of many line stripes of points. A new approach to remove point data with Delaunay triangulation is introduced to deal with problems during reverse engineering process. The selection of group of triangles to be triangulated based on the angle between triangles is used for robust and reliable implementation of Delaunay triangulation as preliminary steps. Developed software enables the user to specify the criteria for the selection of group of triangles either by the angle between triangles or the percentage of triangles reduced. The time and error for handling point data during modelling process can be reduced and thus RP models with accuracy will be helpful to automated process.

CNT-BASED FIELD EMISSION X-RAY SOURCE

  • Kim, Hyun Suk;Lee, Choong Hun
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.433-433
    • /
    • 2016
  • Carbon nanotubes (CNT) emitter has widely become an attractive mechanism that draws growing interests for cold cathode field emission. CNT yarns have demonstrated its potential as excellent field emitters. It was demonstrated that a small focal spot size was achieved by manipulating some electrical parameters, such as applied bias voltage at the mesh gate, and electrostatic focal lenses, geometrical parameters, such as axial distances of the anode, and the electrostatic focal lens from the cathode assembly, and the dimension of the opening of the electrostatic lens. Electrical-optics software was used to systematically investigate the behavior of the electron beam trajectory when the aforementioned variables were manipulated. The results of the experiment agree with the theoretical simulation results. Each variable has an individual effect on the electron beam focal spot size impinging on the target anode. An optimum condition of the parameters was obtained producing good quality of X-ray images. Also, MWCNT yarn was investigated for field emission characteristics and its contribution in the X-ray generation. The dry spinning method was used to fabricate MWCNT yarn from super MWCNTs, which was fabricated by MW-PECVD. The MWCNT yarn has a significant field emission capability in both diode and the triode X-ray generation structure compared to a MWCNT. The low-voltage-field emission of the MWCNT yarn can be attributed to the field enhancing effect of the yarn due to its shape and the contribution of the high-aspect-ratio nanotubes that protrude from the sides of the yarn. Observations of the use of filters on the development of X-ray images were also demonstrated. The amount of exposure time of the samples to the X-ray was also manipulated. The MWCNT yarn can be a good candidate for use in the low voltage field emission application of X-ray imaging.

  • PDF

Numerical simulation of hollow steel profiles for lightweight concrete sandwich panels

  • Brunesi, E.;Nascimbene, R.;Deyanova, M.;Pagani, C.;Zambelli, S.
    • Computers and Concrete
    • /
    • 제15권6호
    • /
    • pp.951-972
    • /
    • 2015
  • The focus of the present study is to investigate both local and global behaviour of a precast concrete sandwich panel. The selected prototype consists of two reinforced concrete layers coupled by a system of cold-drawn steel profiles and one intermediate layer of insulating material. High-definition nonlinear finite element (FE) models, based on 3D brick and 2D interface elements, are used to assess the capacity of this technology under shear, tension and compression. Geometrical nonlinearities are accounted via large displacement-large strain formulation, whilst material nonlinearities are included, in the series of simulations, by means of Von Mises yielding criterion for steel elements and a classical total strain crack model for concrete; a bond-slip constitutive law is additionally adopted to reproduce steel profile-concrete layer interaction. First, constitutive models are calibrated on the basis of preliminary pull and pull-out tests for steel and concrete, respectively. Geometrically and materially nonlinear FE simulations are performed, in compliance with experimental tests, to validate the proposed modeling approach and characterize shear, compressive and tensile response of this system, in terms of global capacity curves and local stress/strain distributions. Based on these experimental and numerical data, the structural performance is then quantified under various loading conditions, aimed to reproduce the behaviour of this solution during production, transport, construction and service conditions.

강관 적층용접부 잔류응력의 생성기구 (Production Mechanism of Residual Stress Generated by Multi-Pass Welding of the steel Pipe)

  • 장경호;양성철;강재훈
    • 한국강구조학회 논문집
    • /
    • 제13권4호
    • /
    • pp.327-335
    • /
    • 2001
  • 강관 적층용접부에서 발생하는 잔류응력의 특징과 생성 메커니즘을 밝히기 위해 유한요소법을 이용한 3차원 열탄소성 해석을 수행하였다. 용접에 의해 강관을 접합할 때, 원주방향잔류응력과 두께방향잔류응력은 강관 내 외부에서 모두 접합부에서 인장응력이 발생하고, 길이방향잔류응력은 강관 내무에서 인장응력, 외부에서 압축응력이 발생된다. 또한 강관 적층 용접부의 잔류응력 생성기구를 명확히 하였다. 그 결과, 강관의 용접에 의한 잔류응력은 열응력에 의해 발생 할 뿐만 아니라, 강관의 기하학적 형상변화에 의한 영향도 받는다는 것을 밝혔다. 그리고, 용접조건과 강관의 제원이 달라질 경우에도 잔류응력 생성기구가 변함이 없음을 밝혔다.

  • PDF