• Nuclear Medicine and Molecular Imaging
• /
• 제42권1호
• /
• pp.61-69
• /
• 2008

목적: 일반적인 바늘구멍 조준기를 사용한 SPECT 시스템은 피사체를 확대시킬 수 있다는 장점이 있어 설치류와 같은 소동물 영상을 얻기에 적합하다. 그러나 몇 가지 기하학적 오차는 영상의 해상도를 크게 저하시킬 수 있으므로 이를 보정해주는 기법이 필요하다. 본 연구에서는 바늘구멍 조준기를 장착한 삼중 헤드 SPECT 시스템에서 간단한 기하학적 보정기법을 개발하고 이를 모형과 몇몇 설치류 영상에 대해 적용하여 기하학적 보정 효과를 검증하였다. 대상 및 방법: Trionix사의 TRIAD XLT9 SPECT시스템에 1.0 mm의 입구를 갖는 바늘구멍 조준기를 장착하고 실험하였다. 회전각도에 의존하는 기하학적 오차를 측정하기 위해 중앙에 위치시킨 점선원의 영상을 얻었다. 무게중심을 구하는 방법으로 점선원의 중심 위치를 찾아주었고 이 중심 위치를 이용하여 기하학적 오차를 보정하였다. 또한 입력해준 회전 반경과 실제 회전 반경의 차이를 보정하기 위해 종축 방향으로 서로 떨어져 있는 두 개의 점선원 영상을 얻었다. 기하학적 오차의 보정 기법을 검증하기 위해 점선원을 보정 전, 후에 각각 재구성하여 이를 비교하였다. 또한 열소반점 초소형 모형 및 몇몇 설치류 영상에 대해 SPECT 영상을 얻어 보정 효과를 검증하였다. 결과: 보정 전 기울어진 도넛 모양으로 보이던 점선원의 재구성 영상이 보정 후 완벽한 구 모양으로 얻어졌고 축방향의 해상도 역시 개선되었다. 열소반점 모형과 설치류 영상에서도 매우 높은 해상도의 영상을 얻을 수 있었다. 결론: 기하학적 오차에 의한 영상 왜곡 및 해상도의 저하 현상이 이 연구에서 개발된 하나 또는 두 개의 점선원을 이용한 간단한 보정 기법에 의해 크게 보정되었다.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.218-222
• /
• 2014

In this paper, we introduce an autonomous calibration method for a 2D laser displacement sensor (e.g. laser vision sensor and laser range finder) by matching a single point on a flat structure. Many arc welding robots install a 2D laser displacement sensor to expand their application by recognizing their environment (e.g. base metal and seam). In such systems, sensing data should be transformed to the robot's coordinates, and the geometric relation (i.e. rotation and translation) between the robot's coordinates and sensor coordinates should be known for the transformation. Calibration means the inference process of geometric relation between the sensor and robot. Generally, the matching of more than 3 points is required to infer the geometric relation. However, we introduce a novel method to calibrate using only 1 point matching and use a specific flat structure (i.e. circular hole) which enables us to find the geometric relation with a single point matching. We make the rotation component of the calibration results as a constant to use only a single point by moving a robot to a specific pose. The flat structure can be installed easily in a manufacturing site, because the structure does not have a volume (i.e. almost 2D structure). The calibration process is fully autonomous and does not need any manual operation. A robot which installed the sensor moves to the specific pose by sensing features of the circular hole such as length of chord and center position of the chord. We show the precision of the proposed method by performing repetitive experiments in various situations. Furthermore, we applied the result of the proposed method to sensor based seam tracking with a robot, and report the difference of the robot's TCP (Tool Center Point) trajectory. This experiment shows that the proposed method ensures precision.

• International Journal of Control, Automation, and Systems
• /
• 제3권3호
• /
• pp.453-460
• /
• 2005

In this paper, a prototype Cartesian Parallel Manipulator (CPM) is demonstrated, in which a moving platform is connected to a fixed frame by three PRRR limbs. Due to the orthogonal arrangement of the three prismatic joints, it behaves like a conventional X-Y-Z Cartesian robot. However, because all the linear actuators are mounted at the fixed frame, the manipulator may be suitable for applications requiring high speed and accuracy. Using a geometric method and the practical assumption that three revolute joint axes in each limb are parallel to one another, a simple forward kinematics for an actual model is derived, which is expressed in terms of a set of linear equations. Based on the error model, two calibration methods using full position and length measurements are developed. It is shown that for a full position measurement, the solution for the calibration can be obtained analytically. However, since a ball-bar is less expensive and sufficiently accurate for calibration, the kinematic calibration experiment on the prototype machine is performed by using a ball-bar. The effectiveness of the kinematic calibration method with a ball-bar is verified through the well­known circular test.

• 한국측량학회지
• /
• 제30권2호
• /
• pp.181-188
• /
• 2012

최근 항공측량분야에서 항측용 디지털카메라와 라이다 및 GPS/INS와 같은 센서들을 이용해 다양한 공간정보를 획득하고 있다. 또한 GPS/INS와 항측용 디지털카메라의 연계를 통한 Direct Georeferencing 기술이 널리 활용되고 있다. 하지만 여러 센서의 결합에 따른 센서검정(Sensor Calibration)을 실시해야 하는 문제점이 따른다. 특히, 통합센서의 Boresight Calibration은 GPS/INS 항공삼각측량 및 Direct-georeferencing을 사용하는 작업절차에서 중요한 요소이다. 이를 해결하기 위해 본 연구에서는 항공기용 센서의 검정을 위한 국가차원의 테스트베드를 세종시 부지에 설치하고 항공영상의 항공삼각측량에 의해 함께 사용되는 GPS와 INS 센서결합에 따른 정확한 검정을 수행하여 시스템 변수의 정의, 시스템적인 에러를 평가하고 Direct Georeferencing에 필요한 외부표정요소 직접결정을 위한 효율적인 방법의 조사와 통합된 센서의 정확도 평가를 수행하였다.

• 한국정밀공학회지
• /
• 제11권5호
• /
• pp.88-97
• /
• 1994

We persent a method for kinematic calibration of open chain mechanisms based on the product of exponentials (POE) formula. The POE formula represents the forward kinematics of an open chain as a product of matrix exponentials, and is based on a modern geometric interpretation of classical screw theory. Unlike the kinematic parameters in the POE formula vary smoothly with changes in the joint axes;ad hoc methods designed to address the inherent singularities in the D-H parameters are therefore are therefore unnecessary. After introducing the POE formula, we derive a least-squares kinematic calibration algorithm for general open chain mechanisms. Simulation results with a 6-axis open chain are presented.

• 로봇학회논문지
• /
• 제17권2호
• /
• pp.183-190
• /
• 2022

Accurate kinematic parameters of mobile robots are essential because inaccurate kinematic model produces considerable uncertainties on its odometry and control. Especially, kinematic parameters of caster type mobile robots are important due to their complex kinematic model. Despite the importance of accurate kinematic parameters for caster type mobile robots, few research dealt with the calibration of the kinematic model. Previous study proposed a calibration method that can only calibrate double-wheeled caster type mobile robot and requires direct-measuring of robot center point and distance between casters. This paper proposes a calibration method based on geometric approach that can calibrate single-wheeled caster type mobile robot with two or more casters, does not require direct-measuring, and can successfully acquire all kinematic parameters required for control and odometry. Simulation and hardware experiments conducted in this paper validates the proposed calibration method and shows its performance.

• 한국CDE학회논문집
• /
• 제20권4호
• /
• pp.357-366
• /
• 2015

We review recent research results on coupled line cameras (CLC) as a new geometric tool to reconstruct a scene quadrilateral from image quadrilaterals. Coupled line cameras were first developed as a camera calibration tool based on geometric insight on the perspective projection of a scene rectangle to an image plane. Since CLC comprehensively describes the relevant projective structure in a single image with a set of simple algebraic equations, it is also useful as a geometric reconstruction tool, which is an important topic in 3D computer vision. In this paper we first introduce fundamentals of CLC with reals examples. Then, we cover the related works to optimize the initial solution, to extend for the general quadrilaterals, and to apply for cuboidal reconstruction.

• 전자공학회논문지B
• /
• 제33B권7호
• /
• pp.127-137
• /
• 1996

The 3-dimensional measurement using stereo vision system must achieve a camera calibration. So far, the 3-dimensional calibration technique that uses two-dimensional grid papar and a non-linear least square method has been developed and tested. But, this method is inefficient because it has many calculation procedure and a non-linear analysis. Therefore, this paper proposed the projective geometric method which produced the calibration parameter by vanishing point. The vanishing point is producted by a cross ratio and a parallel line pairs. The results of the computer simulation show utility of the proposed method.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.198-207
• /
• 1999

This paper presents an accurate algorithm for geometric calibration of X-ray imaging system. Calibration is a very important process for improving an imaging system performance. There has been a lot of previous works using linear camera modeling technique, where lens distortion is neglected and/or center of distortion is assumed to be known. Geometrical distortion of image intensifier, however, is very large and its center of distortion should be calculated. This paper presents a new calibration method to estimate the intensifier position and orientation, scale factor, distortion coefficient, magnification factor, and center of distortion using the least square method. We investigate the properties of the algorithm by computer simulation. Simulation results show that the parameters can be estimated accurately using the proposed algorithm.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제7권3호
• /
• pp.216-220
• /
• 2007

Camera calibration in machine vision is the process of determining the intrinsic camera parameters and the three-dimensional (3D) position and orientation of the camera frame relative to a certain world coordinate system. On the other hand, Takagi-Sugeno-Kang (TSK) fuzzy system is a very popular fuzzy system and approximates any nonlinear function to arbitrary accuracy with only a small number of fuzzy rules. It demonstrates not only nonlinear behavior but also transparent structure. In this paper, we present a novel and simple technique for camera calibration for machine vision using TSK fuzzy model. The proposed method divides the world into some regions according to camera view and uses the clustered 3D geometric knowledge. TSK fuzzy system is employed to estimate the camera parameters by combining partial information into complete 3D information. The experiments are performed to verify the proposed camera calibration.