• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.955-958
• /
• 2003

Nepal is a country of mountains The higher order geodetic points were mostly established on the top of mountains and these points were used for the geodetic network extension. Lower order geodetic control networks were established at different times and used for the surveying and mapping activities of the country.. It has been found that the rate of convergence between north and south borders of Nepal to be 21${\pm}$2 mm each year and the rate translation of Kathmandu to 55${\pm}$3 mm/year to the plates. The most intense deformation in Nepal occurs along the belt of high mountains along its northern border res ulting in a strain contraction rate normal to the Himalayan Arc. This belt is approximately 40 km wide and extends into southern Tibet.( 13). Recently Survey Department of Nepal has lunched a program of strengthening the existing geodetic network of Nepal and re-observed the position of higher order geodetic points by using geodetic GPS receivers to evaluate their position and thus to define the precision of the control points once again. This paper describes the observation procedure and the adjustment results of the existing higher order control network of Nepal established in different time using different types of equipment and techniques; and highlights the observation procedure and the result obtained after the post processing of the GPS observation results. Attempt has been made to give the procedure and identify the methodology for the re observation of existing higher order geodetic points by using GPS receiver and post processing the observed data so that the existing higher order geodetic points are within the given accuracy standard.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.151-155
• /
• 2010

This paper describe the optimal design of geodetic network by analytical technique based on the quality criteria of network. We described an example of geodetic network design taking into account the precision, reliability and strength that are the main criteria of network design. The main goal of this paper is to evaluate the criteria to design the geodetic network coinciding with the criteria of geometrical strength and high reliability. From this study, the result shows relatively weaker strength in marginal part than the center of network. This indicated that the precision of observation in marginal part is relatively lower than the center.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.529-534
• /
• 2006

New geocentric geodetic datum has recently been realized in Korea, Korean Geodetic Datum 2002- KGD2002, to overcome problems due to the existing Tokyo datum, which had been used in this country since early 20th century. This transition will support modern surveying techniques, such as Global Navigation Satellite Systems (GNSS) and ensures that spatial data is compatible with other international systems. For this realization, very long baseline interferometry (VLBI) observations were initially carried out in 1995 to determine the coordinates of the origin of KGD2002 based on the International Terrestrial Reference Frame (ITRF). Continuous GPS observations were collected from 14 reference stations across Korea to compute the coordinates of 1st order horizontal geodetic control points. During the campaign, GPS observations were also collected at about 9,000 existing geodetic control points. In 2006, network adjustment with all data obtained using GPS and EDM since 1975 has been performed under the condition of fixing the coordinates of GPS continuous observation stations to compute coordinate measurements of the 2nd and 3rd geodetic control points. This paper describes the GPS campaigns which have been undertaken since 1996 and details of the network adjustment schemes. This is followed

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.4
• /
• pp.367-380
• /
• 2011

This paper has focused on deriving a GPS based geodetic network adjustment strategy to continuously determine coordinate sets of the national geodetic control points. After domestic literature review on the topic and overseas case studies about countries that recently reformed their geodetic infrastructure have been carried out, a simplified geodetic network consisting of two layers, namely GPS active and passive network, has been proposed to maximize effectiveness of the network adjustment through reducing the number of the passive points. Furthermore, a GPS data processing and network adjustment procedure has been derived to support the continuous management scheme. While a scheme for the active layer adopts a sequential least squares adjustment based on a multi-baseline, that of the passive layer employs a multi-session adjustment technique with respect to 3-dimensional baseline vectors. Finally, experimental adjustment against a network comprising 24 active and 6,900 passive stations has been performed to demonstrate the efficiency and the effectiveness of the proposed method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.4 no.1
• /
• pp.13-24
• /
• 1986

The objective of the present study is to establish the precision geodetic network in south Korea. The precision geodetic datum was determined based on the analysis and evaluation of the astronomic observation data observed by the National Geography Institute during the period of 1981∼1985. A proposal directions for the establishment of precision geodetic networks as well as review or analysis of current geodetic networks including the method of geodetic surveying in our country was completed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.6
• /
• pp.587-594
• /
• 2010

This paper describe the optimal design of geodetic network by analytical technique based on the quality criteria of network. We described an example of geodetic network design taking into account the precision, reliability and robustness that are the main criteria of network design. The main goal of this paper is to evaluate the criteria to design the geodetic network coinciding with the criteria of high precision(error ellipse, 2DRMS, CEP), reliability(internal and external reliability) and robustness(maximum shear strain, principal strain, dilatation). The network design parameters computed in this study show that precision and reliability has not much improved by about 2% and 3%, respectively, than the observed network, while robustness has much improved by about 3, 100%. It also shown that maximum errors of precision, reliability and robustness were reduced by 5%, 7% and 16,957%, respectively.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.505-510
• /
• 2006

SVLBI (Space Very Long Baseline Interferometry) has some important potential applications in geodesy and geodynamics, for which one of the most difficult tasks is to precisely determine the orbit of SVLBI satellite. This paper studies several technologies which possibly will be able to determine the orbit of space VLBI satellite. And then, according to the sorts and characteristicsof satellite and the requirements for geodetic study and the geometry of GNSS (GPS, GALILEO) satellite to track the space VLBI satellite, the six Keplerian elements of SVLBI satellite (TEST-SVLBI) are determined. A program is designed to analyze the coverage area of the space of different heights by the stations of the network, with which the tracking network of TEST-SVLBI is designed. The efficiency of tracking TEST-SVLBI by the network is studied, and the results are presented.

• Journal of the Korean Geophysical Society
• /
• v.6 no.1
• /
• pp.1-11
• /
• 2003

There are numerous adjustment techniques that deal with the adjustment of geodetic networks but the least squares adjustment is the most common one. During the network adjustment procedure two techniques can be used, the free network adjustment technique and the constrained network adjustment technique. In order to determine the optimum technique for adjusting the geodetic networks, which used for the geodynamical purposes, data from two different geodetic networks "Sinai geodetic network, Egypt, and HGN network, South Korea" had been examined. The used networks had a different configuration and located in different areas with different seismic activity. The results show that both techniques have a high accuracy and no remarkable differences in terms of RMS. On the contrary, the resulted coordinates shows that the constrained network adjustment technique not only cause a remarkable distortion in the station final coordinates but also if the fixed points that define the datum parameters are changed different solutions for the coordinates will be determined. This distortion affect not only in the determination of point displacement but also in the estimation of the deformation parameters, which play a significant role in the geodynamical interpretation of results. Comparing the results which obtained from both techniques with the widely known geodynamical models of the area reviles that the free network adjustment technique results are clearly match with these models, while those obtained from the constrained technique didn’t match at all. By considering the results it seams to be that the free network adjustment technique is the optimum technique, which can be used for the geodetic network adjustment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.1
• /
• pp.107-113
• /
• 1995

Generally, the objectives of the geodetic network adjustments are for solving the configuration of geodetic net-works and the problem of observation plans. In this study, assuming that the configuration is fixed, for improving the accuracy of geodetic networks, we focus on choosing adjustment control points and adjustment methods. By choosing adjustment control points and adjustment methods, the adjustment result accuracy of national geodetic networks can be different. So, in this study, we introduce the algorithm that use free network adjustment concept to minimize the displacements of new station points but fixing existing control points. Then, us-ing adjustment results, we can check the errors of existing control points. After checking the errors of existing control point, in case of severe error points in existing control points, we change those points into unknown station points and repeat the algorithm to optimize the coordinates of new station points. As applying this algorithm to simulation network, we can check the errors of existing control points. And changing severe error points into unknown station points, we can decrease the errors of network and optimize the coordinates of new station points. From the results of simulation network adjustment, we think that, as applying this algorithms to sequential adjustment of geodetic network and public surveying that using national geodetic network, the accuracy of network adjustments can be improved.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.465-474
• /
• 2007

This paper focuses on examining and evaluating results of the Korean Geodetic Datum 2002 (KGD2002) of the national horizontal network adjustment. To this end, 137 geodetic control points were independently observed by GPS technology. After processing all the observations, their results were compared with ones derived by the national network adjustment which was recently performed to determine new KGD 2002 coordinate sets over the national geodetic control points. The comparisons results showed that RMSE was ${\pm}2.7cm$ and ${pm}6.5cm$ in horizontal and vertical component in the case of GPS network, whereas RMSE was ${\pm}3.0cm$, in horizontal component in the case of EDM network.