• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.361-364
• /
• 2000

In this study, the system which can make the generator's output voltage more stable by using the inverter in terms of PWM method, is designed It is one of the method reducing velocity of the wind in the process of the wind power generation. Thus, in this system, it is necessary to use a excellent current control inverter. So pulse with modulation method with a high-speed switching element is introduced to control the output current. And also, in order to get a fast response when the standard current generated by the vector control algorithm is supplied with the generator, the output control system with the fast response character and the best current control character is suggested. In this way, the result from the introduction of the control system is that a response character to the changable velocity of the wind is excellent, causing the remarkable reduction of the percentage of the harmonic and the outstanding stability of the variation of the output voltage.

• 대한방사선기술학회지:방사선기술과학
• /
• 제20권2호
• /
• pp.34-43
• /
• 1997

There are 4 types of equipment in diagnostic radiography. These are single phase, three phase, inverter type and condenser type X-ray generators. It is very confusing to make an adequate exposure factor and to know the usage of different type of X-ray generators. In this experiment, I explored a comparative study of outputs in 4 different type of X-ray units. I expect that this experiment could be helpful for manufacturer to make both the X-ray equipment better, In terms of Ideal exposure factors, thereby reducing the patient dose. Experimental results are as follow : 1) X-ray output The ratio of X-ray output of single, three phase and inverter type of X-ray generator was 1 : 1.6 : 2 without absorber and 1 : 2 : 2.6 with 20 mm aluminium absorber. 2) Beam quality The X-ray beam quality of single phase generator was proved to be softer than three phase and inverter type of generators by 0.4 mmAL and 0.55 mmAl HVL respectively. 3) Reproducibility Linearity of X-ray output Retroducibility of X-ray output met the regulation below CV 0.05 and linearity also met the regulation below 0.1 in 4 types of diagnostic X-ray generators. 4) The comparison of incident dose Three phase X-ray generator was 20% higher than two other X-ray generators in radiation dose to make same film density.

• Journal of the Optical Society of Korea
• /
• 제19권3호
• /
• pp.255-259
• /
• 2015

We have proposed and experimentally verified a pulse-width modulation (PWM) generator which directly generated a PWM signal in the optical domain. Output waveforms were clear at the repetition rate of 16 MHz; the duty cycle (DC) was from 14.7% to 72.1%; and the DC-control resolution was about 4.399%/dB. The PWM generator' operation principle is based on the injection-locking property of a single-mode Fabry-$P{\acute{e}}rot$ laser diode (SMFP-LD). The SMFP-LD, which has a self-locked mode wavelength at ${\lambda}_{PWM}$, was used to detect the power of the injection-locking signal (optical analog input). If the analog input power is high, the SMFP-LD is locked to the wavelength of the input signal ${\lambda}_a$ and there is no output after an optical bandpass filter (OBF). If the analog input power is low, the SMFP-LD is unlocked and there is output signal at ${\lambda}_{PWM}$ after the OBF. Thus, the SMFP-LD plus the OBF provide digital output for an analog input. The DC of the output PWM signal can be controlled by tuning the power of the analog input.

• 한국전자통신학회논문지
• /
• 제7권1호
• /
• pp.107-115
• /
• 2012

본 연구는 용접기와 발전기를 통합하여 필요에 따라 발전기로 사용하다가 용접기로 사용할 수 있도록 시스템을 구성하는 것이다. 이와 같이 통합 시스템을 제안하기 위해서는 급속충전이 진행되지 않도록 전력 상태 정보를 관리하는 시스템 구성이 가장 중요하다. 따라서 배터리충전 출력포트, 메인 입출력제어포트, 발전기제어포트, 경고 알람부저, UI스위치 입력부, EXT 전원 출력부, 배터리 상태 확인 입력부, 배터리별 충방전 전류 확인부, UI 조정스위치 입력부, 발전기 상태 확인부, 메인전원 입출력 확인부(전압,전류), 출력전압 확인부, EXT 경고 출력부, DEBUG 통신부, UI 디스플레이부, 외부입력부ADC 등을 중심으로 발전기 제어 시스템을 구현하였다.

• 한국자기학회지
• /
• 제5권2호
• /
• pp.103-108
• /
• 1995

본 논문에서는 돌극형 발전기의 유기전압 고조파 해석 방법을 제안하였다. 해석방법은 회전자 이동을 고려한 2차원 유한요소법을 사용하여 고정자 코일에 쇄교하는 자속을 구하고 이를 DFT로 분석하였다. 제안한 방법의 타당성을 검증하기 위하여 150 KW 동기 발전기의 유기전압 고조파를 구하고 이를 실험차와 비교하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.439-439
• /
• 2009

Nowadays, source of MEMS, USN, Hybrid parts pay attention to energy harvesting. On this paper, energy harvesting was studied using piezoelectric effect. And, piezoelectric generator was designed and fabricated. Generators were designed by FEM simulation program and generators were made by attaching cymbal type metal plates on upper and bottom sides of a disc type piezoelectric ceramic. Output AC power was rectified to DC power by full bridge circuit and converted to regular voltage power by DC-DC converter. The final output power was charged to Ni-Cd battery. Using fabricated generators, output voltages dependant on thickness of ceramic, displacement of vibration, frequency of vibration were measured.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.6-8
• /
• 1998

This paper deals with the maximum output power generation using the Dounly Fed Induction Generator(DFIG) in the super-synchronous speed regions, by control of both magnitude and phase of the voltage fed to the rotor. Steady-state algebraic equations of the euivalent circuit are solved using numerical analysis. For the normal operating region, in which the generator ratings are not exceeded, rotor current is less than or equal to the rated value. By selecting the permisible rated current at rotor coil, there are the optimal solution existng which covers the magnitude and phase of the injected voltage to the rotor for the given slip. This optimal solution is pointing out how the maximum output power can be carried out.

• Journal of Magnetics
• /
• 제21권4호
• /
• pp.577-585
• /
• 2016

In this paper, model of the axial-flux permanent magnet synchronous generator (AFPMSG) having arc-shaped trapezoidal permanent magnets (PM) is presented. The proposed model reduces the cogging torque and torque ripple, at the expense of lowering the average output torque. Optimization of the proposed model is performed by considering the asymmetric overhang configuration of the PMs, as to make the output torque of the proposed model competitive with the conventional model. The time stepped 3D finite element analysis (FEA) is performed for the comparative analysis. It is demonstrated that the torque ripple of the optimized model is highly reduced as well as average output torque is increased.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.656-659
• /
• 2001

In this paper a neural network controller for achieving maximum power tracking as well as output voltage regulation, for a wind energy conversion system(WECS) employing a permanent magnet synchronous generator, is proposed. The permanent magnet generator (PMG) supplies a dc load via a bridge rectifier and two buck-boost converters. Adjusting the switching frequency of the first buck-boost converter achieves maximum power tracking. Adjusting the switching frequency of the second buck-boost converter allows output voltage regulation. The on-times of the switching devices of the two converters are supplied by the developed neural network(NN). The effect of sudden changes in wind speed ,and/or in reference voltage on the performance of the NN controller are explored. Simulation results showed the possibility of achieving maximum power tracking and output voltage regulation simultaneously with the developed neural network controller. The results proved also the fast response and robustness of the proposed control system.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.25-32
• /
• 2020

본 논문에서는 OLED 패널에 영상을 디스플레이 하면서 패널 불량 검사 및 광학 측정을 이용하여 색 좌표 및 휘도를 보상할 수 있는 OLED 패널 테스트를 위한 영상 발생기를 제안한다. 제안된 영상 발생기는 영상 발생 과정과 광학 측정을 이용한 색 좌표 및 휘도를 보상하는 과정 등의 2가지 과정으로 구성된다. 영상 발생 과정은 패널을 구동하기 위한 패널의 정보를 셋팅하고, 패널 정보에 맞게 영상 발생기의 출력 셋팅을 조절하여 영상을 출력한다. 영상의 출력 형태는 디지털 RGB 방식으로 구성된다. 영상발생기 내부의 패턴 발생 알고리즘은 패널의 해상도에 맞게 동기 신호를 기준으로 24비트 데이터 라인에 색데이터를 전송하는 방식으로 칼라 및 그레이 계열 영상 데이터를 출력한다. 광학 측정을 이용한 색 좌표 및 휘도를 보상하는 과정은 영상 발생기에서 영상을 OLED 패널에 출력하고, 광학 모듈로 측정한 색 좌표 및 휘도 데이터를 기준 데이터보다 차이나는 부분을 보상한다. 본 논문에서 제안된 OLED 패널 테스트를 위한 영상 발생기의 정확성을 평가하기 위해서 Xilinx 사의 Spartan 6 계열의 XC6SLX25-FG484 FPGA를 사용하였고 설계 툴은 ISE 14.5를 사용하였다. 영상 발생 과정의 출력은 오실로스코프를 이용한 디지털 RGB 출력에 대하여 목표로 한 설정 값과 시뮬레이션 결과 값이 일치함을 확인 할 수 있었다. 광학 측정을 이용한 색 좌표 및 휘도를 보상한 데이터는 패널 제조업체에서 제시한 오차율 이내의 정확도를 나타내었다.