• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.713-720
• /
• 2009

The development goals of the next generation EMU are to improve the system maintainability, transportation capacity, reliability, passenger service and energy efficiency. In this paper, we propose a measurement scheme for the development goals of the next generation Electric Multiple Unit(EMU). To achieve that, we drew meaningful characteristics for each development goal, which mainly affect effectiveness and performance of vehicle system. Finally, the measurement scheme for the development is obtained by using the characteristics, which could be a numerical values such as maximum velocity, acceleration of the vehicle and so on or subjective values such as a results of surveys from passengers and so on. We expect the proposed measurement scheme will be used to measure the development goals of other similar system as well as the next generation EMU.

• 한국의상디자인학회지
• /
• 제25권1호
• /
• pp.33-47
• /
• 2023

In this study, the difference in human body dimensions between the age groups of Generation M (27 to 39 years old) and Generation Z (20 to 26 years old) was analyzed. This study also analyzed if there was a change in the body shape of the MZ generation, who have different sensibilities from the "young people" of the past. In addition, major changes in human body dimensions were carefully analyzed and presented as basic data for clothing design. Therefore, a t-test was performed to verify the significant differences in the measurements of each age group. To examine the change in human body measurements according to the measurement year, the 7th and 8th size Korea data statistics were analyzed. The main required dimensions of clothing design were analyzed graphically for visual changes according to measurement year and age group. As a result of the analysis, Generation Z was found to have a difference in body shape from Generation M, and is generally smaller and slimmer with broader shoulders. In addition, the body shape change between the 7th and 8th measurement periods was significantly higher than the 8th measurement overall. Height has increased and back length has become shorter, resulting in a larger ratio of lower body length. In addition, the proportion of obesity abnormalities has increased. Therefore, since the dimensional system set from the past data can cause problems for the fitting of clothing for the MZ generation, it is necessary to design the clothing and reset the dimensional system making it suitable for the changed the body shape of the MZ generation.

• Nuclear Engineering and Technology
• /
• 제40권4호
• /
• pp.299-304
• /
• 2008

A detection system was set up to measure the neutron generation rate of a recently developed D-D neutron generator. The system is composed of a Si detector, He-3 detector, and electronics for pulse height analysis. The neutron generation rate was measured by counting protons using the Si detector, and the data was crosschecked by counting neutrons with the He-3 detector. The efficiencies of the Si and He-3 detectors were calibrated independently by using a standard alpha particle source $^{241}Am$ and a bare isotopic neutron source $^{252}Cf$, respectively. The effect of the cross-sectional difference between the D(d,p)T and $D(d,n)^3He$ reactions was evaluated for the case of a thick target. The neutron generation rate was theoretically corrected for the anisotropic emission of protons and neutrons in the D-D reactions. The attenuations of neutron on the path to the He-3 detector by the target assembly and vacuum flange of the neutron generator were considered by the Monte Carlo method using the MCNP 4C2 code. As a result, the neutron generation rate based on the Si detector measurement was determined with a relative uncertainty of ${\pm}5%$, and the two rates measured by both detectors corroborated within 20%.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2004년도 춘계 학술발표대회 논문집
• /
• pp.224-225
• /
• 2004

• 설비공학논문집
• /
• 제14권11호
• /
• pp.931-938
• /
• 2002

Combustion dynamics of a dry low NOx gas turbine have been measured by utilizing a dynamic pressure measurement system. The software part of the measurement system, implemented with a commercial general-purpose DASYLab version 5.6 code, basically acquires combustion dynamics signals, performs the FFT analysis, and displays the results. The gas turbine often experiences momentary combustion instability, especially when its combustion mode changes. It is found that the measurement system developed in the study may outperform the other commercial dynamic pressure measurement system. The developed system currently serves to monitor the combustion dynamics of the gas turbine.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.602-605
• /
• 2005

In this paper, we present a model to calculate the influence of the measurement spot diameter MSD on the viewing angle measurements using a conoscopic instrument. This model is verified experimentally using an EZContrast instrument and the requirements for next generation of displays are presented. We show that last generation of EZContrast XL88W and L80W allowing measurement spot diameter up to 6mm can fulfill the requirements for all the FPD generations up to 80 inches diagonal.

• 전기학회논문지
• /
• 제59권9호
• /
• pp.1560-1565
• /
• 2010

The renewable resource are getting more attentions with increased concerns on the depletion of fossil fuels and several environmental issues like emission problem. Wind power is a representative option among several renewable sources and the generation capacity using wind power is being increased. However, the wind generation is so volatile on its output characteristic, so it is required to assess the grid impact of wind power generation by measuring the fluctuation effect more precisely. This paper proposes the method for measuring the generation output according to IEC 61400-21(Measurement and assessment of power quality characteristics of grid connected wind turbines) to assess the power quality of wind turbine generation. In addition, it shows an application case to a small-scale wind power generator. In the case study, it suggests a structure design of the proposed measurement instrument both on hardware and software aspects, which is composed of a remote monitoring & data analysis program and an FPGA based real-time signal processing device.

• 디지털콘텐츠학회 논문지
• /
• 제13권4호
• /
• pp.625-629
• /
• 2012

NGN 운용과정의 품질 보증을 위해 어떤 체계하에서 품질이 테스트 되어야 하는지 방법론을 도출하기 위해서 멀티미디어 트래픽을 중심으로 NGN 품질측정 프레임워크를 제시한다. 테스트베드는 NGN 운용과정에서 QoS 측정 메트릭스, 측정구간과 측정계위, 측정도구, 측정장비, 측정방법 및 측정결과 분석에 대한 일련의 프로세스와 방법론을 모델화한다. 이 모델은 향후 NGN 품질보증 활동에 활용토록 한다. 통신서비스 품질은 스스로 보장되지 않으며 끊임없이 측정되고 관리될 때에 만 품질 목표수준 확보가 가능하다. NGN 네트워크기술 패러다임 중요성을 감한할 때 NGN 운용상의 품질관리에 대한 연구는 앞으로 활발하게 추진되어야 할 핵심 소재이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.861-862
• /
• 2011

• 전자공학회논문지A
• /
• 제29A권7호
• /
• pp.56-63
• /
• 1992

A measurement technique of the surface generation velocity S$_o$ using the BC(buried channel) MOS structure with shallow and low doped channel layer (BC MOS S$_o$ measurement technique) is presented and verified analytically and experimentally. Using this measurement technique, S$_o$ can be measured more accurately than that measured using the gate-controlled diode SS1oT measurement technique. When S$_o$ is measured for the two techniques from a BC MOS structure test patten with gate length of 171$\mu$m, the results are 0,66cm/sec and 0.28cm/sec for the former and the latter respectively.