• Journal of Plant Biology
• /
• 제3권2호
• /
• pp.1-5
• /
• 1960

Azotobacter is isolated from soil and its purified species is identified as A. chroococcum. The survival rate of Azotobacter irradiated with UV light is measured, and the reproductive rates of the survivals are calculated. In general, not only the survival rate, but also the length of the generation time of the survival progeny is inversely proportional to the irradiated dose of UV light. The reproduvtive rate of Azotobacter is increased with the exogeneous treatment of nucleic acid derivatives.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.1181-1186
• /
• 1993

In the paper, a new design method of rule-based fuzzy modeling is proposed for model identification of nonlinear systems. The structure indentification is carried out, utilizing fuzzy c-means clustering. Fuzzy-neural networks composed back-propagation algorithm and linear fuzzy inference method, are used to identify parameters of the premise and consequence parts. To obtain optimal linguistic fuzzy implication rules, the learning rates and momentum coefficients are tuned automatically using a modified complex method.

• 한국시뮬레이션학회논문지
• /
• 제10권3호
• /
• pp.95-103
• /
• 2001

Rendering of 3D terrain data in real-time is difficult because of its large scale. So, it is necessary to use level-of-detail(LOD) that uses fewer data, but makes almost similar image to the original. We present an algorithm for real-time LOD generation and rendering of 3D terrain data. The algorithm applies wavelet transform to the terrain data, and then generates quadtree based view-dependent LOD using wavelet coefficients that are the output of wavelet transform. It also uses frame-to-frame coherence and view culling for high frame rates.

• 분석과학
• /
• 제16권5호
• /
• pp.399-406
• /
• 2003

본 연구는 수소화물 발생장치가 부착된 원자흡광 광도계 (HG-AAS)를 이용하여 비교적 고농도의 Se을 함유하고 있는 석유정제 폐수의 Se 분석을 위하여 적합한 분석조건을 선정하고자 수행되었다. Se(VI)의 Se(IV)로의 환원 실험에서 폐수량 10 mL, 염산 주입량 10 mL, 가열시간 30분이 최적 환원조건으로 결정되었다. 폐수의 조성성분과 유기물의 농도가 높은 경우에는 Se 회수율이 감소하였다. 따라서 3가지 산분해법 ($HNO_3/HClO_4$ 분해, $KMnO_4$ 분해 및 초단파 산분해)에 의한 유기물, 석유화합물 분해 및 유기성 Se(org.), Se(IV) 산화에 따른 Se 회수율을 검토하였다. 실험결과 산분해전 약 50~80%이었던 Se 회수율은 모든 산분해에서 90%이상이었으며 특히, 초단파 산분해에 의한 Se 회수율이 가장 높은 것으로 나타났다. 그러므로 HG-AAS를 이용한 석유정제 폐수의 Se 분석시에는 초단파 산분해후 염산 처리를 하는 전처리 과정이 가장 적합한 것으로 나타났다.

• 대한임상검사과학회지
• /
• 제55권1호
• /
• pp.16-28
• /
• 2023

폐암은 크게 소세포성 폐암과 비소세포성 폐암으로 구분되며 비소세포성폐암이 차지하는 비율은 약 70%~80%이다. 비소세포성폐암 중 폐선암은 전체 폐암의 약 40%를 차지한다. 최근 유전자 프로파일링 기술이 발전하면서 종양의 발생 및 성장에 중요한 종양 유전자와 종양 억제 유전자의 변이에 대한 연구가 활발히 진행되어 폐암을 유발하는 특정 유전자들이 발견되면서 생존율에 큰 영향을 미치게 되었으며 특히 폐선암은 차세대 염기서열 분석법(next generation sequencing, NGS)을 이용한 동반진단을 통해 표적 치료로 생존을 높이는 데 도움을 얻을 수 있다. 본 연구는 한국인에서 폐선암을 유발하는 유전자 변이 검출을 위해 비소세포성폐암 환자의 파라핀 포매조직(formalin-fixed paraffin-embedded)으로 hematoxylin and eosin 염색을 시행하여 폐선암을 구분하였으며 정확한 폐선암 조직을 분류하기 위해 면역조직화학(immunohistochemistry, IHC)염색을 시행하였다. 그 결과를 바탕으로 NGS를 이용하여 유전자 변이의 종류와 패턴을 분석하였고 폐암을 유발하는 가장 대표적인 원인인 흡연과의 관계를 확인하였다. NGS 결과 단일염기서열변이(single nucleotide variation, SNV), 복제수변이 (copy number variation, CNV), 유전자 재배열을 확인하였으며 폐선암에서 SNV는 TP53 (44.6%), EGFR (35.7%), KRAS (10.7%), PIK3CA (6.2%), CDKN2A (4.4%) 순으로 발생하였고 CNV의 경우 EGFR (14%)이 가장 빈번하게 발생하였다. 또한 ALK, ROS1, RET 과 같은 유전자 재배열을 확인하였다. NGS의 신뢰도를 확인을 위하여 기존에 사용되고 있는 유전자 검사방법인 PCR-EGFR, IHC-ALK (D5F3), FISH-ROS1 검사를 추가적으로 시행하여 NGS 결과와 일치도를 확인하였다. 이 연구는 폐선암 환자에 대한 NGS가 여러 유전자의 돌연변이를 동시에 확인하여 치료 전략에 더욱 긍정적인 이익을 줄 수 있음을 보여준다.

• 설비공학논문집
• /
• 제10권6호
• /
• pp.773-783
• /
• 1998

The heating system for apartment complex may be classified as old systems including central system with steam boiler(S1), gas engine driven heat pump system(S2), system using waste heat(S3) and new systems including mechanical vapor re-compression system with flashing heat exchangers(S4), system using methanol(S5), system using metal hydride (S6). The purpose of the present study is to suggest optimal heating system by technically, economically and environmentally evaluating old and new heating systems of apartment complex from 500 to 3,000 households. Economic evaluation based on the technical evaluation results which estimated heat transfer area of heat exchangers and capacity of equipments was estimated initial investment cost, annual operating cost and relative payback period by considering annual increasing rates of energy cost and interest. Environmental evaluation provided annual generation rate of carbon dioxide. Initial investment cost was cheap in the order of S6, S5, S3, S2, S4, S1, annual operating cost was cheap in the order of S1, S2, S4, S5 and relative payback period was short in the order of S6, S5, S2, S3 and S4. Relative payback period was within 8 years for all scenarios of 3,000 households, and was increased as annual increasing rates of energy cost and interest were increased. As transportation pipe length was increased twice, payback period was increased by 1.4~2.6 time. The effect of temperatures of waste gas and waste water on the relative payback period was small within 0.8 years. The annual generation rate of carbon dioxide was big in the order of S4, S2 and S1. S4 was the most economic system among whole scenarios when S1 was replaced with other scenarios.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.1032-1040
• /
• 2001

It is widely accepted that the pressure variation of interstitial fluid is one of the most important factors in bone physiology. In order to understand the role of interstitial fluid on porous bony structure, a consideration for the biomechanical interactions between fluid and solid constituents within bone is required. In this study, a poroelastic theory was applied to investigate the elastic behavior of calf vertebral trabecular bone composed of the porous solid trabeculae and the viscous bone marrow. The poroelastic behavior of trabecular bone in a uniaxial stress condition was simulated using a commercial finite difference analysis software (FLAC, Itasca Consulting Group, USA), and tested for 5 different strain rates, i.e., 0.001, 0.01, 0.1, and 10 per second. The material properties of the calf vertebral trabecular bone were utilized from the previous experimental study. Two asymptotic poroelastic responses, the drained and undrained deformations, were predicted. From the predicted results for the simulated five strain rates, it was found that the pore pressure generation has a linearly increasing behavior when the strain rate is the highest at 10 per second, otherwise it showed a nonlinear behavior. The pore pressure generation with respect to the strain was found to be increased as the strain rate increased. The elastic moduli predicted at each strain were 208.3, 212.2, 337.6, 593.1, and 602.2 MPa, respectively. Based on the results of the present study, it was suggested that the calf vertebral trabecular bone could be modeled as a poroelastic material and its strain rate dependent material behavior could be predicted.

• 대한기계학회논문집B
• /
• 제26권4호
• /
• pp.604-613
• /
• 2002

Generation characteristics of electrospray droplets for highly viscous liquid have been investigated by measuring size distributions of droplets emitted from the Taylor cone using glycerol solutions with various conductivities. Because of very small volatility of glycerol, droplet sizes can be measured by an aerodynamic size spectrometer (TSI Aerosizer DSP) with negligible evaporation of droplets. For highly conducting and viscous liquid, the sizes of the droplets electrosprayed from the Taylor cone are found to be relatively insensitive to applied voltages and the electrosprays assisted by the corona discharge call produce monodisperse droplets as long as the corona intensity is not too high. Near the minimum flow rate where a liquid cone is stable, the spray tends to consist of a one -peak monodisperse distribution of drop lets. However, at high flow rates, the spray bifurcates into bimodal distributions, which are consistent with the result of the previous study for less viscous liquids than our liquids. For liquid flow rates (Q) below 1 nl/s, the measured droplet diameters by the aerosizer are in the range of 0.30 to 1.2 ${\mu}{\textrm}{m}$ for the glycerol solutions. The diameters of monodisperse droplets scale approximately with $r^*=Q_$\tau$(Q$\tau$){^1/3}$ where $r^*$ is a characteristic length and $\tau$is the electrical relaxation time of the fluid. However, when compared with several represe ntative scaling laws, the droplet diameters are two to six factors greater than those predicted by the scaling laws. This may be closely related to the combined effect of the much higher viscosity and the electrical charge on the jet breakup of glycerol so solution.

• 한국통신학회논문지
• /
• 제35권8B호
• /
• pp.1241-1250
• /
• 2010

스마트그리드의 개념이 확장되면서 다양한 산업과 융합되어 확산되어가고 있는 상황에서 스마트그리드의 가능성 및 가치를 검증하고 평가할 필요가 있다. 이를 위해 본 연구에서는 스마트그리드가 융합되어 확산될 수 있는 산업분야를 조망하고 이를 토대로 스마트그리드 산업의 경제적 파급효과를 도출하고자 하는데 목적을 두고 있다. 스마트그리드산업의 확산방향을 파악하기 위하여 참여사업자(players)의 진화 전략과 파생될 수 있는 신사업을 중심으로 살펴보았으며, 이를 통해 에너지, 건설, 가전, 자동차산업이 융합산업으로 선정되었다. 선정된 산업분야와 추정한 국내 전망치를 적용하고 산업연관표를 활용하여 유발계수를 도출한 후, 경제적 파급효과를 추정하였다. 그 결과, 2010-2020년까지의 총생산유발액은 약 77조 원, 총부가가치유발액은 약 24조 원, 총고용유발인원은 약 31만 명에 이를 것으로 전망되었다.

• 한국재료학회지
• /
• 제16권12호
• /
• pp.731-738
• /
• 2006

It is seriously considered using Al CMP (chemical mechanical planarization) process for the next generation 45 nm Al wiring process. Al CMP is known that it has a possibility of reducing process time and steps comparing with conventional RIE (reactive ion etching) method. Also, it is more cost effective than Cu CMP and better electrical conductivity than W via process. In this study, we investigated 4 different kinds of slurries based on abrasives for reducing scratches which contributed to make defects in Al CMP. The abrasives used in this experiment were alumina, fumed silica, alkaline colloidal silica, and acidic colloidal silica. Al CMP process was conducted as functions of abrasive contents, $H_3PO_4$ contents and pressures to find out the optimized parameters and conditions. Al removal rates were slowed over 2 wt% of slurry contents in all types of slurries. The removal rates of alumina and fumed silica slurries were increased by phosphoric acid but acidic colloidal slurry was slightly increased at 2 vol% and soon decreased. The excessive addition of phosphoric acid affected the particle size distributions and increased scratches. Polishing pressure increased not only the removal rate but also the surface scratches. Acidic colloidal silica slurry showed the highest removal rate and the lowest roughness values among the 4 different slurry types.