• Journal of Korea Foundry Society
• /
• v.11 no.1
• /
• pp.54-62
• /
• 1991

A computer program which consists of pre-processor, main solidification simulator and post-processor has been developed for three dimensional solidification analysis of steel castings. The pre-processor is used for mesh generation in a small personal computing system. The modified finite difference method is adopted for the main solidification simulation algorithm. The post -processor graphically presents the simulation results and shows the formation of shrinkage defects. Several experiments on large steel castings in sand mold were carried out. The temperature variations in casting and mold with time are measured experimentally, and the results are compared with calculation results. Several numerical examples for the prediction of shrinkage cavity in large steel casting of SC42 and SCNCrM2 alloys are compared with experimental results. The effect of sleeve and chills on solidification patterns are also studied. Formation of shrinkage defects for the three cases of experimental castings are relatively well predicted by present model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1336-1341
• /
• 2013

Through reviewing the characteristics of digital TVs, which have emerged in CES since 2005, in the view of technology growth and substitution curves, this paper is to provide a prediction on the next generation's multi-media on smart environment. As a result, digital TV has been developed on the flow of its technology growth curve from the early version in 2005 to smart digital TV in 2013, which emphasizes the key word "connected", and it has already come to the market puberty.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1178-1188
• /
• 2014

This study proposes a finite-state model predictive controller to regulate the load current and balance the DC-link capacitor voltages of a four-leg neutral-point-clamped converter. The discrete-time model of the converter, DC-link, inductive filter, and load is used to predict the future behavior of the load currents and the DC-link capacitor voltages for all possible switching states. The switching state that minimizes the cost function is selected and directly applied to the converter. The cost function is defined to minimize the error between the predicted load currents and their references, as well as to balance the DC-link capacitor voltages. Moreover, the current regulation performance is improved by using a two-step prediction horizon. The feasibility of the proposed predictive control scheme for different references and loads is verified through real-time implementation on the basis of dSPACEDS1103.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.3
• /
• pp.261-272
• /
• 2020

A Kalman filter algorithm is used for the generation of an ensemble timescale with three hydrogen masers maintained in KRISS. Allan deviation curves of three pairs of clocks were obtained by a three-cornered hat method and were used as reference curves for determination of parameters of the Kalman filter-based timescale. The ensemble timescale equation of a 3-clock system was established, and the clocks' phases estimated by the Kalman filter were used as the prediction time of each clock in the equation. The weight of each clock was determined inversely proportional to the Allan variance calculated with the clocks' phases. The Allan deviation of the weighted mean was 1.2×10^-16 at the averaging time of 57,600 s. However when we made fine adjustments of the clocks' weight, the minimum Allan deviation of 2×10^-17 was obtained. To find out the reason of the great improvement in the frequency stability, additional researches are in progress theoretically and experimentally.

• Journal of Digital Contents Society
• /
• v.19 no.3
• /
• pp.561-567
• /
• 2018

In this paper, we apply this method to the entire process of smart disaster safety management based on the $4^{th}$ industrial revolution to minimize human, social, economic and environment damage from accidents and disasters, prevention evaluation and disaster information collection analysis and real-time detection of field situation. Prevention of $5^{th}$ generation communication system by analysis, contrast by education and training using virtual reality and augmented reality disaster safety management decision support system intelligent robot for recovery, disaster, discovery, reconnaissance relief, and scale analysis of damages were proposed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.591-596
• /
• 2012

Recently, the efficient management system for photovoltaic power plants has been required due to the continuously increasing construction of photovoltaic power plants. In this paper, we propose a cloud-based intelligent management system for many photovoltaic power plants. The proposed system stores the measured data of power plants using Hadoop HBase which is a column-oriented database, and processes the calculations of performance, efficiency, and prediction the amount of power generation by parallel processing based on Map-Reduce model. And, Web-based data visualization module allows the administrator to provide information in various forms.

• Journal of Environmental Science International
• /
• v.25 no.6
• /
• pp.829-837
• /
• 2016

The mechanism of micro-bubble generation with a pump is not clarified yet, so the design of water treatment systems with a micro-bubble generating pump is based on trial and error methods. This study tried to explain clearly quantitative relationships of experimental micro-bubble concentration ($C_{air}$) of continuous operation tests with a micro-bubble generating pump and theoretical air solubility. Operation parameters for the tests were discharge pressure ($P_g$), water ($Q_{w0}$) and air ($q_0$) flow rates, orifice diameter ($D_o$), and retention time (t). The experimental micro-bubble concentrations ($C_{air}$) at 4.8 atm of discharge pressure ($P_g$) were in the range of 21.04 to 25.29 mL/L. When the retention time (t) by changing the pipe line length ($L_p$) increased from 1.22 to 6.77s, the experimental micro-bubble concentrations ($C_{air}$) increased from 25.86 to 30.78 mL air/L water linearly. The dissolved and dispersed micro-bubble concentrations ($C_{air}$) are approximately 4 times more than the theoretical air solubility.

• Journal of Gastric Cancer
• /
• v.13 no.3
• /
• pp.129-135
• /
• 2013

Gastric cancer is the second leading cause of cancer-related deaths worldwide. In advanced and metastatic gastric cancer, the conventional chemotherapy with limited efficacy shows an overall survival period of about 10 months. Patient specific and effective treatments known as personalized cancer therapy is of significant importance. Advances in high-throughput technologies such as microarray and next generation sequencing for genes, protein expression profiles and oncogenic signaling pathways have reinforced the discovery of treatment targets and personalized treatments. However, there are numerous challenges from cancer target discoveries to practical clinical benefits. Although there is a flood of biomarkers and target agents, only a minority of patients are tested and treated accordingly. Numerous molecular target agents have been under investigation for gastric cancer. Currently, targets for gastric cancer include the epidermal growth factor receptor family, mesenchymal-epithelial transition factor axis, and the phosphatidylinositol 3-kinase-AKT-mammalian target of rapamycin pathways. Deeper insights of molecular characteristics for gastric cancer has enabled the molecular classification of gastric cancer, the diagnosis of gastric cancer, the prediction of prognosis, the recognition of gastric cancer driver genes, and the discovery of potential therapeutic targets. Not only have we deeper insights for the molecular diversity of gastric cancer, but we have also prospected both affirmative potentials and hurdles to molecular diagnostics. New paradigm of transdisciplinary team science, which is composed of innovative explorations and clinical investigations of oncologists, geneticists, pathologists, biologists, and bio-informaticians, is mandatory to recognize personalized target therapy.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.334-337
• /
• 2004

차세대 생산 시스템(Next Generation Manufacturing System： NGMS)의 핵심 개념은 분산 생산 시스템과 다품종 소량의 유연 생산 시스템의 지원이다. 이러한 시스템의 구성을 위하여 실시간 데이터에 기반한 예측 모델이 필수적인데, 이러한 예측 기능을 통하여 생산공정의 관리와 운영, 특히 전체 공정관리를 효율적으로 수행할 수 있다. 한편, 공정으로부터 전송된 데이터는 특정한 형태의 지식으로 표현된다. 이러한 지식들은 시스템에 대한 다양한 정보를 가지고 있으므로 정보를 이용하여 시스템 상태를 빠르고 쉽게 진단할 수 있다. 공정 진단은 현재 공정 상태에서 생산되는 제품의 품질을 추정할 수 있는 정보로 활용된다. 본 논문에서는 이러한 개념이 바탕이 되어 공정관리 시스템을 설계하였다. 제안된 시스템의 적용 대상은 반도체 제조 공정의 단위 공정인 에칭 공정이다. 에칭 공정은 공정 중에 연속적인 검사가 수행되지 않고 최종 제품에 대한 검사가 수행되므로 불량 원인을 찾는 것이 쉽지 않다. 따라서 본 논문에서는 공정관리를 위한 의사지원시스템을 통해 공정의 연속적인 간접진단을 수행하고자 하였다. 본 연구에서 사용된 의사지원시스템은 각 공정에서 얻어지는 데이터와 경험적 지식을 토대로 공정시스템의 해석과 진단이 가능한 시스템이다.

• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.232-241
• /
• 2017

Advanced control algorithms must be used to make wind power generation truly cost effective and reliable. In this study, we develop a new and simple control scheme that employs model predictive control (MPC), which is used in permanent magnet synchronous generators and grid-connected inverters. The proposed control law is based on two points, namely, MPC-based torque-current control loop is used for the generator-side converter to reach the maximum power point of the wind turbine, and MPC-based direct power control loop is used for the grid-side converter to satisfy the grid code and help improve system stability. Moreover, a simple prediction scheme is developed for the direct-drive wind energy conversion system (WECS) to reduce the computation burden for real-time applications. A small-scale WECS laboratory prototype is built and evaluated to verify the validity of the developed control methods. Acceptable results are obtained from the real-time implementation of the proposed MPC methods for WECS.