• Structural Engineering and Mechanics
• /
• v.80 no.6
• /
• pp.677-688
• /
• 2021

The building design codes and standards in many countries usually are either fully or partially adopted from the international codes. However, regional conditions like the quality of construction industry and different statistical parameters of load and resistance have essential roles in the code calibration of building design codes. This paper presents a probabilistic approach to assess the reliability level of adopted national building codes by simulating design situations and considering all load combinations. The impact of the uncertainty of wind and earthquake loads, which are entirely regional condition dependent and have a high degree of uncertainty, are quantified. In this study, the design situation is modeled by generating thousands of numbers for load effect ratios, and the reliability level of steel elements for all load combinations and different load ratios is established and compared to the target reliability. This approach is applied to the Iranian structural steel code as a case study. The results indicate that the Iranian structural steel code lacks safety in some load combinations, such as gravity and earthquake load combinations, and is conservative for other load combinations. The present procedure can be applied to the assessment of the reliability level of other national codes.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.321-322
• /
• 2006

In this paper, we propose a method that extracts invariant iris codes from user's iris pattern in order to apply these codes to a new cryptographic construct called fuzzy vault. The fuzzy vault, proposed by Juels and Sudan, has been used to manage cryptographic key safely by merging with biometrics. Generally, iris data has intra-variation of iris pattern according to sensed environmental changes, but cryptography requires correctness. Therefore, to combine iris data and fuzzy vault, we have to extract an invariant iris feature from iris pattern. In this paper, we obtain invariant iris codes by clustering iris features extracted by independent component analysis(ICA) transform. From experimental results, we proved that the iris codes extracted by our method are invariant to sensed environmental changes and can be used in fuzzy vault.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.5-8
• /
• 2000

In this paper, we present a new cぉnet coding method, so called MLC (Multi-Level Codes), for error detection and correction in digital wireless communication. MLC coding method we the same coding procedure wed in the convolutional coding but it is distinguished from the existing convolutional coding in point of generating the code word by using multi-level information data (M-ary signal) and in point of speed of coding procedure Through computer simulation, we analyze the performance of the coding method suggested here compared to convolutional coding method in case of modulo-operation and in case of non-binary coding Procedure respectively under various channel environments.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.579-584
• /
• 2009

This paper describes a power quality analysis of a photovoltaic generating systems. Prior to the power measurement, domestic and foreign codes related to the photovoltaic generating systems were briefly summarized. After constructing about 5 kW photovoltaic systems, input/output voltages and currents were measured to compare and analyze the power quality by the module type. Based on the measured values, a couple of factors such as active power, power factor, total harmonic distortion(THD) was calculated and analyzed.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1081-1092
• /
• 2014

Renewable energy is being spotlighted as the electric power generating source for the next generation. Due to an increase in renewable energy systems in the grid system, their impact on the grid has become non-negligible. Thus, many countries in the world, including Europe, present their own grid codes for grid power conversion devices. In order to experiment with these grid codes, grid fault test equipment is required. This paper proposes both equipment and a control method, which are constructed with a 7-level cascaded H-bridge converter, that are capable of generating various grid faults. In addition, the Pulse Width Modulation (PWM) method for multilevel converters is compared and analyzed. The proposed structure, the control method, and the PWM method are verified through simulation and experimental results.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.3102-3113
• /
• 2023

Following the Fukushima nuclear disaster, the simulation of accidents in the spent fuel pool has become more noticeable. Despite the low amount of decay heat power, the consequences of the accidents in a spent fuel pool (SFP) can be severe due to the high content of long-lived radionuclides and lack of protection by the pressure vessel. In this study, the loss-of-cooling accident (LOFA) for the VVER-1000/V446 spent fuel pool is simulated by employing RELAP5 and MELCOR 1.8.6 as the best estimate and severe accident analysis codes, respectively. For two cases with different total power levels, decay heat of spent fuels is calculated by ORIGEN-II code. For modeling SFP of a VVER-1000, a qualified nodalizations are considered in both codes. During LOFA in SFP, the key sequences such as heating up of the pool water, boiling and reducing the water level, uncovering the spent fuels, increasing the temperature of the spent fuels, starting oxidation process (generating Hydrogen and extra power), the onset of fuel melting, and finally releasing radionuclides are studied for both cases. The obtained results show a reasonable consistency between the RELAP5 and MELCOR codes, especially before starting the oxidation process.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.6
• /
• pp.809-817
• /
• 2008

Program plagiarism is widespread due to intelligent software and the global Internet environment. Consequently the detection of plagiarized source code and software is becoming important especially in academic field. Though numerous studies have been reported for detecting plagiarized pairs of codes, we cannot find any profound work on understanding the underlying mechanisms of plagiarism. In this paper, we study the evolutionary process of source codes regarding that the plagiarism procedure can be considered as evolutionary steps of source codes. The final goal of our paper is to reconstruct a tree depicting the evolution process in the source code. To this end, we extend the well-known bioinformatics approach, a local alignment approach, to detect a region of similar code with an adaptive scoring matrix. The asymmetric code similarity based on the local alignment can be considered as one of the main contribution of this paper. The phylogenetic tree or evolution tree of source codes can be reconstructed using this asymmetric measure. To show the effectiveness and efficiency of the phylogeny construction algorithm, we conducted experiments with more than 100 real source codes which were obtained from East-Asia ICPC(International Collegiate Programming Contest). Our experiments showed that the proposed algorithm is quite successful in reconstructing the evolutionary direction, which enables us to identify plagiarized codes more accurately and reliably. Also, the phylogeny construction algorithm is successfully implemented on top of the plagiarism detection system of an automatic program evaluation system.

• Journal of Korea Multimedia Society
• /
• v.10 no.5
• /
• pp.652-667
• /
• 2007

With the wide spread of XML data in various fields, the interest in developing convenient user interfaces for inputting XML data is increasing. Previous works on the automated generation of user interfaces have given insufficient supports for various user environments and inconvenient editing tools for complex documents. In this paper, we presents an approach to generate XForms based user interfaces from XML schemas, for inputting XML data. The proposed method consists of three steps: parsing XML schemas, generating XForms codes, and embedding it into host language documents. Specifically, to generate XFonns codes, the rules for generating XForms codes, which support complex types and map simple types to appropriate input controls, are proposed. Experimental results with various kind of schemas show that the proposed method can generate XForms interfaces successfully.

• Journal of the Korean Mathematical Society
• /
• v.48 no.2
• /
• pp.267-288
• /
• 2011

In this paper, we construct eight infinite families of ternary linear codes associated with double cosets with respect to certain maximal parabolic subgroup of the special orthogonal group $SO^-$(2n, q). Here q is a power of three. Then we obtain four infinite families of recursive formulas for power moments of Kloosterman sums with square arguments and four infinite families of recursive formulas for even power moments of those in terms of the frequencies of weights in the codes. This is done via Pless power moment identity and by utilizing the explicit expressions of exponential sums over those double cosets related to the evaluations of "Gauss sums" for the orthogonal groups $O^-$(2n, q).

• Journal of applied mathematics & informatics
• /
• v.8 no.3
• /
• pp.773-793
• /
• 2001

The explicit expressions for the 2n+1 primitive idempotents in R/sub pⁿ/ = F[x]/< x/sup pⁿ/ -1>, where F is the field of prime power order q and the multiplicative order of q modulo pⁿ is ø(pⁿ)/2(n≥1 and p is an odd prime), are obtained. An algorithm for computing the generating polynomials of the minimal QR cyclic codes of length pⁿ, generated by these primitive idempotents, is given and hence some bounds on the minimum distance of some QR codes of prime length over GF(q)(q=2, 3, ...) are obtained.